I have a problem with Lilo: I wanted to make a test installing Lilo on a floppy first. But all I get is a screen full of '01 01 01'.
I have found on the net that many people had this problem when trying to boot a partition on the second IDE controller from Lilo. The recommandation is to plug the hd to the first controller, which is not an option here. But there must be another solution, I'm sure... It seams that also the following contributes (or is) the problem: 00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] :-( /etc/lilo.conf boot=/dev/fd0 prompt delay=110 <= the distinction is not really clear to me timeout=120 <= but I have tried both alone and together... lba32 # compact vga=normal # install=/boot/boot.b read-only # Debian Woody: image=/boot/vmlinuz-2.4.18-bf2.4 root=/dev/hdd3 label=l ... I have experimented with commenting out and in lba32, compact, and install=/boot/boot.b. It does not make a difference. Lilo does *not* prompt and wait for user input but fills the screen with '01 01 01' and then hangs... (Yes, I *did* run lilo and I *have* tested with another floppy medium) Robert Epprecht -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
