Hi,
I'm having trouble getting X to work.
I'm running uptodate Sid with kernel-image 2.6.7 on a Compaq Deskpro
2000 PC5120
I've had X running previously but I don't normally run it so I
don't know when it stopped working unfortunately.
The full log is below but these are the errors from it
(--) CIRRUS(0): Linear framebuffer at 0x40000000
(EE) CIRRUS(0): No valid MMIO address in PCI config space
(--) CIRRUS(0): Not Using MMIO
(EE) CIRRUS(0): I2C initialization failed
This shows up in dmesg (included below):
vesafb: probe of vesafb0 failed with error -6
Is that another problem?
I've looked on google but couldn't find a solution that seems relevant
to Xfree86 4.3.0. The readme says that the GD4536 is supported. I'm
guessing I need to an option or two in my XF86Config-4 (included below)
but I haven't a clue where to start without risking damaging anything.
Maybe I have a hardware problem :-( The GD5436 is embedded in the
motherboard It seems.
I only download my mail every 3 days or so. So if you need any
more info I can supply it then, hopefully this will help someone else
in future.
Following is (hopefully helpful) info:
Output from lspci -v -v
0000:00:00.0 Host bridge: Intel Corp. 430HX - 82439HX TXC [Triton II] (rev 01)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort+ >SERR- <PERR-
Latency: 32
0000:00:07.0 ISA bridge: Intel Corp. 82371SB PIIX3 ISA [Natoma/Triton II]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0
0000:00:07.1 IDE interface: Intel Corp. 82371SB PIIX3 IDE [Natoma/Triton II] (prog-if
80 [Master])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 64
Region 4: I/O ports at 1000 [size=16]
0000:00:0f.0 VGA compatible controller: Cirrus Logic GD 5436 [Alpine] (prog-if 00
[VGA])
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Region 0: Memory at 40000000 (32-bit, non-prefetchable) [size=16M]
Output from dmesg
=================
Linux version 2.6.7-1-386 ([EMAIL PROTECTED]) (gcc version 3.3.4 (Debian 1:3.3.4-2))
#1 Thu Jul 8 05:08:04 EDT 2004
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000005000000 (usable)
BIOS-e820: 00000000fffe0000 - 0000000100000000 (reserved)
80MB LOWMEM available.
On node 0 totalpages: 20480
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 16384 pages, LIFO batch:4
HighMem zone: 0 pages, LIFO batch:1
DMI not present.
ACPI: Unable to locate RSDP
Built 1 zonelists
Kernel command line: root=/dev/hda2 ro
No local APIC present or hardware disabled
Initializing CPU#0
PID hash table entries: 512 (order 9: 4096 bytes)
Detected 119.790 MHz processor.
Using tsc for high-res timesource
Console: colour VGA+ 80x25
Memory: 74072k/81920k available (1309k kernel code, 7340k reserved, 701k data, 204k
init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 233.98 BogoMIPS
Security Scaffold v1.0.0 initialized
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: 000001bf 00000000 00000000 00000000
CPU: After vendor identify, caps: 000001bf 00000000 00000000 00000000
Intel Pentium with F0 0F bug - workaround enabled.
CPU: After all inits, caps: 000001bf 00000000 00000000 00000000
CPU: Intel Pentium 75 - 200 stepping 06
Checking 'hlt' instruction... OK.
Checking for popad bug... OK.
checking if image is initramfs...it isn't (ungzip failed); looks like an initrd
Freeing initrd memory: 4252k freed
NET: Registered protocol family 16
EISA bus registered
PCI: PCI BIOS revision 2.10 entry at 0xf2074, last bus=0
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040326
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
PnPBIOS: Scanning system for PnP BIOS support...
PnPBIOS: Found PnP BIOS installation structure at 0xc00fefe0
PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0x8b21, dseg 0xf0000
pnp: 00:0e: ioport range 0x398-0x399 has been reserved
PnPBIOS: 14 nodes reported by PnP BIOS; 14 recorded by driver
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
devfs: 2004-01-31 Richard Gooch ([EMAIL PROTECTED])
devfs: boot_options: 0x0
Initializing Cryptographic API
Limiting direct PCI/PCI transfers.
Activating ISA DMA hang workarounds.
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 54 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
EISA: Probing bus 0 at eisa0
NET: Registered protocol family 2
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 8192 bind 16384)
NET: Registered protocol family 8
NET: Registered protocol family 20
RAMDISK: cramfs filesystem found at block 0
RAMDISK: Loading 4252 blocks [1 disk] into ram disk... done.
VFS: Mounted root (cramfs filesystem) readonly.
Freeing unused kernel memory: 204k freed
vesafb: probe of vesafb0 failed with error -6
NET: Registered protocol family 1
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX3: IDE controller at PCI slot 0000:00:07.1
PIIX3: chipset revision 0
PIIX3: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x1000-0x1007, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x1008-0x100f, BIOS settings: hdc:pio, hdd:pio
hda: WDC AC11200LS, ATA DISK drive
Using anticipatory io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: FX400, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 2503872 sectors (1281 MB) w/256KiB Cache, CHS=2484/16/63, (U)DMA
/dev/ide/host0/bus0/target0/lun0: p1 p2 p4
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Adding 62488k swap on /dev/hda1. Priority:-1 extents:1
EXT3 FS on hda2, internal journal
Real Time Clock Driver v1.12
NET: Registered protocol family 17
mice: PS/2 mouse device common for all mice
input: ImPS/2 Generic Wheel Mouse on isa0060/serio1
Capability LSM initialized
device-mapper: 4.1.0-ioctl (2003-12-10) initialised: [EMAIL PROTECTED]
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
lp0: using parport0 (interrupt-driven).
NET: Registered protocol family 10
Disabled Privacy Extensions on device c02c3f00(lo)
IPv6 over IPv4 tunneling driver
CSLIP: code copyright 1989 Regents of the University of California
PPP generic driver version 2.4.2
PPP BSD Compression module registered
PPP Deflate Compression module registered
apm: BIOS version 1.1 Flags 0x02 (Driver version 1.16ac)
Here is my XF86Config-4 (minus comments)
========================================
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
Section "Files"
FontPath "unix/:7100" # local font server
# if the local font server has problems, we can fall back on these
FontPath "/usr/lib/X11/fonts/misc"
FontPath "/usr/lib/X11/fonts/cyrillic"
FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/lib/X11/fonts/Type1"
FontPath "/usr/lib/X11/fonts/CID"
FontPath "/usr/lib/X11/fonts/Speedo"
FontPath "/usr/lib/X11/fonts/100dpi"
FontPath "/usr/lib/X11/fonts/75dpi"
EndSection
Section "Module"
Load "GLcore"
Load "bitmap"
Load "dbe"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "record"
Load "speedo"
Load "type1"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc101"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "Emulate3Buttons" "true"
Option "ZAxisMapping" "4 5"
EndSection
Section "Device"
Identifier "Cirrus Logic GD543x GD 5436 [Alpine]"
Driver "cirrus"
EndSection
Section "Monitor"
Identifier "CTPhilips"
HorizSync 30-70
VertRefresh 50-160
Option "DPMS"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "Cirrus Logic GD543x GD 5436 [Alpine]"
Monitor "CTPhilips"
DefaultDepth 16
SubSection "Display"
Depth 1
Modes "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "640x480"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
EndSection
Section "DRI"
Mode 0666
EndSection
======== End of XF86Config-4 ================================
Here is my XFree86.0.log
========================
This is a pre-release version of XFree86, and is not supported in any
way. Bugs may be reported to [EMAIL PROTECTED] and patches submitted
to [EMAIL PROTECTED] Before reporting bugs in pre-release versions,
please check the latest version in the XFree86 CVS repository
(http://www.XFree86.Org/cvs).
XFree86 Version 4.3.0.1 (Debian 4.3.0.dfsg.1-6 20040707142024 [EMAIL PROTECTED])
Release Date: 15 August 2003
X Protocol Version 11, Revision 0, Release 6.6
Build Operating System: Linux 2.4.23 i686 [ELF]
Build Date: 07 July 2004
Before reporting problems, check http://www.XFree86.Org/
to make sure that you have the latest version.
Module Loader present
OS Kernel: Linux version 2.6.7-1-386 ([EMAIL PROTECTED]) (gcc version 3.3.4 (Debian
1:3.3.4-2)) #1 Thu Jul 8 05:08:04 EDT 2004
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Wed Jul 14 22:06:50 2004
(==) Using config file: "/etc/X11/XF86Config-4"
(==) ServerLayout "Default Layout"
(**) |-->Screen "Default Screen" (0)
(**) | |-->Monitor "CTPhilips"
(**) | |-->Device "Cirrus Logic GD543x GD 5436 [Alpine]"
(**) |-->Input Device "Generic Keyboard"
(**) Option "XkbRules" "xfree86"
(**) XKB: rules: "xfree86"
(**) Option "XkbModel" "pc101"
(**) XKB: model: "pc101"
(**) Option "XkbLayout" "us"
(**) XKB: layout: "us"
(==) Keyboard: CustomKeycode disabled
(**) |-->Input Device "Configured Mouse"
(WW) The directory "/usr/lib/X11/fonts/cyrillic" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/lib/X11/fonts/CID" does not exist.
Entry deleted from font path.
(**) FontPath set to
"unix/:7100,/usr/lib/X11/fonts/misc,/usr/lib/X11/fonts/100dpi/:unscaled,/usr/lib/X11/fonts/75dpi/:unscaled,/usr/lib/X11/fonts/Type1,/usr/lib/X11/fonts/Speedo,/usr/lib/X11/fonts/100dpi,/usr/lib/X11/fonts/75dpi"
(==) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(--) using VT number 7
(II) Open APM successful
(II) Module ABI versions:
XFree86 ANSI C Emulation: 0.2
XFree86 Video Driver: 0.6
XFree86 XInput driver : 0.4
XFree86 Server Extension : 0.2
XFree86 Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.6
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,1250 card 0000,0000 rev 01 class 06,00,00 hdr 00
(II) PCI: 00:07:0: chip 8086,7000 card 0000,0000 rev 00 class 06,01,00 hdr 80
(II) PCI: 00:07:1: chip 8086,7010 card 0000,0000 rev 00 class 01,01,80 hdr 00
(II) PCI: 00:0f:0: chip 1013,00ac card 0000,0000 rev 00 class 03,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,0), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:7:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(0:15:0) Cirrus Logic GD 5436 [Alpine] rev 0, Mem @ 0x40000000/24
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) Active PCI resource ranges:
[0] -1 0 0x40000000 - 0x40ffffff (0x1000000) MX[B](B)
[1] -1 0 0x00001000 - 0x0000100f (0x10) IX[B]
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0x40000000 - 0x40ffffff (0x1000000) MX[B](B)
[1] -1 0 0x00001000 - 0x0000100f (0x10) IX[B]
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x40000000 - 0x40ffffff (0x1000000) MX[B](B)
[6] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[7] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[8] -1 0 0x00001000 - 0x0000100f (0x10) IX[B]
(II) LoadModule: "GLcore"
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
Skipping "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_clip.o": No symbols
found
Skipping "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_norm.o": No symbols
found
Skipping "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_xform.o": No symbols
found
Skipping "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_vertex.o": No symbols
found
(II) Module GLcore: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.2
(II) LoadModule: "bitmap"
(II) Reloading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Loading font Bitmap
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "dri"
(II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
(II) Module dri: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.2
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/X11R6/lib/modules/linux/libdrm.a
(II) Module drm: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension XFree86-DRI
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
(II) Module freetype: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 2.0.2
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.2
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Reloading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Loading extension GLX
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "record"
(II) Loading /usr/X11R6/lib/modules/extensions/librecord.a
(II) Module record: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.13.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension RECORD
(II) LoadModule: "speedo"
(II) Loading /usr/X11R6/lib/modules/fonts/libspeedo.a
Skipping "/usr/X11R6/lib/modules/fonts/libspeedo.a:spencode.o": No symbols found
(II) Module speedo: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.1
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Speedo
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.2
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "vbe"
(II) Loading /usr/X11R6/lib/modules/libvbe.a
(II) Module vbe: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.1.0
ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "cirrus"
(II) Loading /usr/X11R6/lib/modules/drivers/cirrus_drv.o
(II) Module cirrus: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
Module class: XFree86 XInput Driver
ABI class: XFree86 XInput driver, version 0.4
(II) CIRRUS: driver for Cirrus chipsets: CLGD5430, CLGD5434-4, CLGD5434-8,
CLGD5436, CLGD5446, CLGD5480, CL-GD5462, CL-GD5464, CL-GD5464BD,
CL-GD5465, CL-GD7548
(II) Primary Device is: PCI 00:0f:0
(--) Assigning device section with no busID to primary device
(--) Chipset CLGD5436 found
(II) Loading sub module "cirrus_alpine"
(II) LoadModule: "cirrus_alpine"
(II) Loading /usr/X11R6/lib/modules/drivers/cirrus_alpine.o
(II) Module cirrus_alpine: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.6
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x40000000 - 0x40ffffff (0x1000000) MX[B](B)
[6] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[7] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[8] -1 0 0x00001000 - 0x0000100f (0x10) IX[B]
(II) resource ranges after probing:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x40000000 - 0x40ffffff (0x1000000) MX[B](B)
[6] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[7] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[8] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[9] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[10] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[11] -1 0 0x00001000 - 0x0000100f (0x10) IX[B]
[12] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[13] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.6
(II) CIRRUS(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/X11R6/lib/modules/linux/libint10.a
(II) CIRRUS(0): initializing int10
(II) CIRRUS(0): Primary V_BIOS segment is: 0xc000
(WW) System lacks support for changing MTRRs
(**) CIRRUS(0): Depth 16, (--) framebuffer bpp 16
(==) CIRRUS(0): RGB weight 565
(==) CIRRUS(0): Default visual is TrueColor
(==) CIRRUS(0): Using SW cursor
(--) CIRRUS(0): Linear framebuffer at 0x40000000
(EE) CIRRUS(0): No valid MMIO address in PCI config space
(--) CIRRUS(0): Not Using MMIO
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Loading /usr/X11R6/lib/modules/libi2c.a
(II) Module i2c: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.2.0
ABI class: XFree86 Video Driver, version 0.6
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Reloading /usr/X11R6/lib/modules/libddc.a
(EE) CIRRUS(0): I2C initialization failed
(==) CIRRUS(0): Using gamma correction (1.0, 1.0, 1.0)
(--) CIRRUS(0): Memory Config reg 1 is 0x11
(--) CIRRUS(0): Memory Config reg 2 is 0x21
(--) CIRRUS(0): VideoRAM: 1024 kByte
(==) CIRRUS(0): Min pixel clock is 12 MHz
(--) CIRRUS(0): Max pixel clock is 50 MHz
(II) CIRRUS(0): CTPhilips: Using hsync range of 30.00-70.00 kHz
(II) CIRRUS(0): CTPhilips: Using vrefresh range of 50.00-160.00 Hz
(II) CIRRUS(0): Clock range: 12.00 to 50.00 MHz
(II) CIRRUS(0): Not using default mode "320x175" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "320x200" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "360x200" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1024x768" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1024x768" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1024x768" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1024x768" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1024x768" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1152x864" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1280x960" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1280x960" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1280x1024" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1280x1024" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1280x1024" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1600x1200" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1600x1200" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1600x1200" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1600x1200" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1600x1200" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1792x1344" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "896x672" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "1792x1344" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "896x672" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "1856x1392" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "928x696" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "1856x1392" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "928x696" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "960x720" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "960x720" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "832x624" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "416x312" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1152x768" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "576x384" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1400x1050" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1400x1050" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1600x1024" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "800x512" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "960x720" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "2048x1536" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "1024x768" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "2048x1536" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "1024x768" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "2048x1536" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "1024x768" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "800x600" (width too large for virtual size)
(II) CIRRUS(0): Not using default mode "800x600" (width too large for virtual size)
(II) CIRRUS(0): Not using default mode "800x600" (width too large for virtual size)
(II) CIRRUS(0): Not using default mode "800x600" (width too large for virtual size)
(II) CIRRUS(0): Not using default mode "720x400" (width too large for virtual size)
(--) CIRRUS(0): Virtual size is 640x480 (pitch 640)
(**) CIRRUS(0): *Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz
(II) CIRRUS(0): Modeline "640x480" 36.00 640 696 752 832 480 481 484 509 -hsync
-vsync
(**) CIRRUS(0): Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
(II) CIRRUS(0): Modeline "640x480" 31.50 640 656 720 840 480 481 484 500 -hsync
-vsync
(**) CIRRUS(0): Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz
(II) CIRRUS(0): Modeline "640x480" 31.50 640 664 704 832 480 489 491 520 -hsync
-vsync
(**) CIRRUS(0): Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz
(II) CIRRUS(0): Modeline "640x480" 25.20 640 656 752 800 480 490 492 525 -hsync
-vsync
(**) CIRRUS(0): Default mode "640x400": 31.5 MHz, 37.9 kHz, 85.1 Hz
(II) CIRRUS(0): Modeline "640x400" 31.50 640 672 736 832 400 401 404 445 -hsync
+vsync
(**) CIRRUS(0): Default mode "640x350": 31.5 MHz, 37.9 kHz, 85.1 Hz
(II) CIRRUS(0): Modeline "640x350" 31.50 640 672 736 832 350 382 385 445 +hsync
-vsync
(==) CIRRUS(0): DPI set to (75, 75)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 ANSI C Emulation, version 0.2
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.1.0
ABI class: XFree86 Video Driver, version 0.6
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0x40000000 - 0x40ffffff (0x1000000) MX[B]
[1] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[2] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[3] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[4] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[5] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[6] -1 0 0x40000000 - 0x40ffffff (0x1000000) MX[B](B)
[7] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprU)
[8] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprU)
[9] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprU)
[10] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[11] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[12] -1 0 0x00001000 - 0x0000100f (0x10) IX[B]
[13] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[14] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) CIRRUS(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) CIRRUS(0): Using 339 lines for offscreen memory
(II) CIRRUS(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
Solid Horizontal and Vertical Lines
(==) CIRRUS(0): Silken mouse enabled
(**) Option "dpms"
(**) CIRRUS(0): DPMS enabled
(==) RandR enabled
(II) Setting vga for screen 0.
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Keyboard "Generic Keyboard" handled by legacy driver
(**) Option "Protocol" "ImPS/2"
(**) Configured Mouse: Protocol: "ImPS/2"
(**) Option "CorePointer"
(**) Configured Mouse: Core Pointer
(**) Option "Device" "/dev/input/mice"
(**) Option "Emulate3Buttons" "true"
(**) Configured Mouse: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) Configured Mouse: ZAxisMapping: buttons 4 and 5
(**) Configured Mouse: Buttons: 5
(II) XINPUT: Adding extended input device "Configured Mouse" (type: MOUSE)
(II) Configured Mouse: ps2EnableDataReporting: succeeded
Warning: font renderer for ".pcf" already registered at priority 0
Warning: font renderer for ".pcf.Z" already registered at priority 0
Warning: font renderer for ".pcf.gz" already registered at priority 0
Warning: font renderer for ".snf" already registered at priority 0
Warning: font renderer for ".snf.Z" already registered at priority 0
Warning: font renderer for ".snf.gz" already registered at priority 0
Warning: font renderer for ".bdf" already registered at priority 0
Warning: font renderer for ".bdf.Z" already registered at priority 0
Warning: font renderer for ".bdf.gz" already registered at priority 0
Warning: font renderer for ".pmf" already registered at priority 0
If you've got this far thanks for taking timeout for me.
Chris.
======
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
