I don't understand you because all my hosts can connect without problems but my public IP, I cannot use internal. This is my big problem.
Sorry My English is bad, can you explain me, plesae? ----- Original Message ----- From: "Pietro Cagnoni" <[EMAIL PROTECTED]> To: "聲gel Carrasco" <[EMAIL PROTECTED]> Cc: <[EMAIL PROTECTED]> Sent: Thursday, October 24, 2002 5:19 PM Subject: Re: NETWORK ROUTES > > This is my route -n > > Kernel IP routing table > > Destination Gateway Genmask Flags Metric Ref Use > > Iface > > 213.250.143.240 0.0.0.0 255.255.255.240 U 0 0 0 eth0 > > 172.16.4.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1 > > 172.16.16.0 0.0.0.0 255.255.255.0 U 0 0 0 eth3 > > 172.16.8.0 0.0.0.0 255.255.255.0 U 0 0 0 eth2 > > 0.0.0.0 172.16.16.254 0.0.0.0 UG 0 0 0 eth3 > > an easy try: what is the default gateway setting on the internal > networks hosts? > > for instance, on network 172.16.4.0/24, if the router nic is on > 172.16.4.1, the default gateway on any other host must be 172.16.4.1 > (hope i've been clear :-) ) > > eventually, you can try to dump completely static routing. static > routing is good for causing headaches. > > hope this helps. > > pietro. > > > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] > -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
