On Wed, Oct 23, 2002 at 07:48:06AM -0600, Dan.Hunt wrote:
> Hello Debian Users
> I am migrating my Woody firewall machine from dial up modem to static IP
> DSL. In Saskatchewan Canada that's Sask-Tel Enhanced High Speed
> Internet.
>
> I put the second NIC into the last pci slot. It is a DLINK DFE-538TX/R that
> usees the RTL8139 or the 8139too module.
>
> They are both compiled into the Kernel ( 2.14 ? ) as modules.
>
You can find out your kernel release with uname.
$ uname -r
2.4.19-custom586.1
$
> As this is my second NIC I am struggling to get the card recognized at boot
> up.
>
> I know the card works because I am using it now in M$ to send this plea.
>
> Would someone like to point me to a document? The Ethernet howto has me
> confused.
>
>
Does the work with a manual insmod? If so, have you tried mentioning
them in /etc/modules?
$ cat /etc/modules
# /etc/modules: kernel modules to load at boot time.
#
# This file should contain the names of kernel modules that are
# to be loaded at boot time, one per line. Comments begin with
# a `#', and everything on the line after them are ignored.
ne io=0x280 irq=5
3c59x
$
--
Shaul Karl, [EMAIL PROTECTED] e t
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
