On Tue, Oct 29, 2013 at 7:56 PM, Aron Xu <a...@debian.org> wrote: > On Wed, Oct 30, 2013 at 2:40 AM, Bastien ROUCARIES > <roucaries.bast...@gmail.com> wrote: >> On Tue, Oct 29, 2013 at 7:35 PM, Aron Xu <a...@debian.org> wrote: >>> On Wed, Oct 30, 2013 at 1:15 AM, Tollef Fog Heen <tfh...@err.no> wrote: >>>> ]] Aron Xu >>>> >>>>> > IPMI would be lovely, but I'm not sure we can locate a board right now >>>>> > with >>>>> > that - so, we may have to fix remote management with a remotely >>>>> > controlled >>>>> > power/reset box - I believe they exist (something else I've been looking >>>>> > into). If the DSA already use some then I'd be interested to hear which >>>>> > :-) >>>>> >>>>> I don't know if IPMI is available, but there is certain kind of PCI >>>>> device that can help with remotely power on/off the machine controlled >>>>> by SMS. I'm curious if DSA think IPMI is mandatory for buildd and >>>>> porterbox. >>>> >>>> We would very much like «reasonable remote access». Whether that's IPMI >>>> onto a BMC or serial console which can interact with the boot loader and >>>> a network-enabled power strip is less important. Of course, having nice >>>> features like mounting of ISOs over HTTP and such is a nice bonus, but >>>> not a requirement. >>>> >>>> We haven't really talked about how and when it should be enforced, but >>>> I'm reluctant to take on more porter hardware that lacks reasonable >>>> remote management. >>>> >>> >>> If we can find a way of letting Loongson 3A board supports remote >>> console then you are able to re-install the system because PMON have >>> networking support and can boot the system from tftp. Power control >>> can be done by hacking the on-board power button pins. >> >> It could be done trivally from a chip arm card. Using socat from a tty >> to a ssh tunnel >> see http://www.dest-unreach.org/socat/doc/socat-ttyovertcp.txt > > Looks really cool, and I think it's doable to support power control > like what you've suggested already.
What are the safety specification appliable by DSA ? Main tension ? Does the board have a power brick ? Bastien > > Cheers, > Aron Xu -- To UNSUBSCRIBE, email to debian-devel-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/cae2spabpc2o9+f55vot9vrnmuowmn0jgkkt7zrt9vvwmhl-...@mail.gmail.com
