Hi Evgeni First of all, accept my gratitude for your swift response.
On Thu, Feb 26, 2009 at 05:06:37PM +0100, Evgeni Golov wrote: […] > > When I run “scanimage -L” under user “paulo”, this is the output: > > > > No scanners were identified. If you were expecting something different, > > check that the scanner is plugged in, turned on and detected by the > > sane-find-scanner tool (if appropriate). Please read the documentation > > which came with this software (README, FAQ, manpages). > > > > If I run it under “root”, this is the output: > > > > device `hpaio:/usb/PSC_1500_series?serial=BR58R1R0D60498' is a > > Hewlett-Packard PSC_1500_series all-in-one […] > Add the user paulo to the "lp" group. You have one of those stupid HP > all-in-ones which are only reachable as a lp user. > > At least that helped a friend of mine with a similar hardware. You're right: I'm trying to scan from a HP PSC 1510, one of those «beasts». Did as you told me, added “paulo” to group “lp”, here's the output from running “groups”: paulo adm lp dialout cdrom floppy sudo audio video plugdev staff scanner mldonkey But the problem persists: the device is not identified under “paulo“ but it is under “root”. Browsing /var/log/aptitude, I observed these upgrades to libsane: Feb 17th: 1.0.19-23 -> 1.0.19-24 Feb 21st: 1.0.19-24 -> 1.0.19-25 I'd risk a guess that I haven't used the scanner since the 1st upgrade, so the problem seems to have crept in at version 1.0.19-24 or 1.0.19-25. Let me know how we can further debug the problem. Once again my sincere thanks for your readiness Paulo -- To UNSUBSCRIBE, email to debian-bugs-rc-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
