Package: xl2tpd
Version: 1.2.7+dfsg-1
Severity: important

On establishing tunnel, xl2tpd starts pppd which fails due to missing 
/dev/pts/xx.
It appears xl2tpd is not creating the pseudo tty as it should be.
There are no error messages in any log from xl2tpd notifying a problem with 
creating the pts.

Does not appear to be a problem with pts itself as other services are using it 
ok.

syslog shows:
Dec  9 20:20:25 linux ipsec__plutorun: 002 added connection description 
"vpntunnel"
Dec  9 20:20:26 linux ipsec__plutorun: 003 NAT-Traversal: Trying new style NAT-T
Dec  9 20:20:26 linux ipsec__plutorun: 003 NAT-Traversal: ESPINUDP(1) setup 
failed for new style NAT-T family IPv4 (errno=19)
Dec  9 20:20:26 linux ipsec__plutorun: 003 NAT-Traversal: Trying old style NAT-T
Dec  9 20:20:39 linux xl2tpd[26423]: Connecting to host vpn.xxxxxx.net, port 
1701
Dec  9 20:20:39 linux xl2tpd[26423]: control_finish: message type is (null)(0). 
 Tunnel is 0, call is 0.
Dec  9 20:20:39 linux xl2tpd[26423]: control_finish: sending SCCRQ
Dec  9 20:20:41 linux xl2tpd[26423]: control_finish: message type is 
Start-Control-Connection-Reply(2).  Tunnel is 11413, call is 0.
Dec  9 20:20:41 linux xl2tpd[26423]: control_finish: sending SCCCN
Dec  9 20:20:41 linux xl2tpd[26423]: Connection established to 66.xx.125.14, 
1701.  Local: 33580, Remote: 11413 (ref=0/0).
Dec  9 20:20:41 linux xl2tpd[26423]: Calling on tunnel 33580
Dec  9 20:20:41 linux xl2tpd[26423]: control_finish: message type is (null)(0). 
 Tunnel is 11413, call is 0.
Dec  9 20:20:41 linux xl2tpd[26423]: control_finish: sending ICRQ
Dec  9 20:20:41 linux xl2tpd[26423]: check_control: Received out of order 
control packet on tunnel 11413 (got 0, expected 1)
Dec  9 20:20:41 linux xl2tpd[26423]: handle_packet: bad control packet!
Dec  9 20:20:41 linux xl2tpd[26423]: check_control: Received out of order 
control packet on tunnel 11413 (got 0, expected 1)
Dec  9 20:20:41 linux xl2tpd[26423]: handle_packet: bad control packet!
Dec  9 20:20:41 linux xl2tpd[26423]: control_finish: message type is 
Incoming-Call-Reply(11).  Tunnel is 11413, call is 26233.
Dec  9 20:20:41 linux xl2tpd[26423]: control_finish: Sending ICCN
Dec  9 20:20:41 linux xl2tpd[26423]: Call established with 66.xx.125.14, Local: 
22221, Remote: 26233, Serial: 1 (ref=0/0)
Dec  9 20:20:41 linux xl2tpd[26423]: start_pppd: I'm running:
Dec  9 20:20:41 linux xl2tpd[26423]: "/usr/sbin/pppd"
Dec  9 20:20:41 linux xl2tpd[26423]: "passive"
Dec  9 20:20:41 linux xl2tpd[26423]: "nodetach"
Dec  9 20:20:41 linux xl2tpd[26423]: ":"
Dec  9 20:20:41 linux xl2tpd[26423]: "refuse-pap"
Dec  9 20:20:41 linux xl2tpd[26423]: "auth"
Dec  9 20:20:41 linux xl2tpd[26423]: "require-chap"
Dec  9 20:20:41 linux xl2tpd[26423]: "name"
Dec  9 20:20:41 linux xl2tpd[26423]: "mark"
Dec  9 20:20:41 linux xl2tpd[26423]: "debug"
Dec  9 20:20:41 linux xl2tpd[26423]: "file"
Dec  9 20:20:41 linux xl2tpd[26423]: "/etc/ppp/options.l2tpd.cf"
Dec  9 20:20:41 linux xl2tpd[26423]: "/dev/pts/3"
Dec  9 20:20:41 linux pppd[26648]: pppd 2.4.5 started by root, uid 0
Dec  9 20:20:41 linux pppd[26648]: using channel 10
Dec  9 20:20:41 linux pppd[26648]: Using interface ppp10
Dec  9 20:20:41 linux pppd[26648]: Connect: ppp10 <--> /dev/pts/3
Dec  9 20:20:41 linux pppd[26648]: sent [LCP ConfReq id=0x1 <mru 1410> 
<asyncmap 0x0> <magic 0x6b14abb1> <pcomp> <accomp>]
Dec  9 20:20:41 linux xl2tpd[26423]: control_finish: message type is 
Call-Disconnect-Notify(14).  Tunnel is 11413, call is 26233.
Dec  9 20:20:41 linux xl2tpd[26423]: control_finish: Connection closed to 
66.xx.125.14, serial 1 ()
Dec  9 20:20:41 linux xl2tpd[26423]: Terminating pppd: sending TERM signal to 
pid 26648
Dec  9 20:20:41 linux pppd[26648]: Modem hangup
Dec  9 20:20:41 linux pppd[26648]: Connection terminated.
Dec  9 20:20:41 linux pppd[26648]: Failed to open /dev/pts/3: No such file or 
directory
Dec  9 20:20:41 linux last message repeated 8 times
Dec  9 20:20:41 linux pppd[26648]: Exit.
Dec  9 20:20:41 linux avahi-daemon[1961]: Withdrawing workstation service for 
ppp10.
Dec  9 20:21:41 linux xl2tpd[26423]: control_finish: message type is Hello(6).  
Tunnel is 11413, call is 0.
Dec  9 20:22:41 linux xl2tpd[26423]: control_finish: message type is Hello(6).  
Tunnel is 11413, call is 0.
Dec  9 20:23:41 linux xl2tpd[26423]: control_finish: message type is Hello(6).  
Tunnel is 11413, call is 0.
..................

Also, not relivant here, but xl2tpd 1.2.7+dfsg-1 package is installed, but 
"xl2tpd --version" returns "version: 1.2.6".

-- System Information:
Debian Release: squeeze/sid
  APT prefers testing
  APT policy: (500, 'testing')
Architecture: amd64 (x86_64)

Kernel: Linux 2.6.32-5-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_AU.UTF-8, LC_CTYPE=en_AU.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages xl2tpd depends on:
ii  libc6                         2.11.2-7   Embedded GNU C Library: Shared lib
ii  libpcap0.8                    1.1.1-2    system interface for user-level pa
ii  ppp                           2.4.5-4    Point-to-Point Protocol (PPP) - da

xl2tpd recommends no packages.

xl2tpd suggests no packages.

-- Configuration Files:
/etc/xl2tpd/xl2tpd.conf changed [not included]

-- no debconf information



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Reply via email to