Package: net-tools Version: 1.60-23 Severity: normal
~ # mii-tool eth0: negotiated 100baseTx-FD, link ok eth1: no link eth2: no link ~ # dmesg | tail -30 [ 193.941508] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 194.027247] eth2: setting half-duplex. [ 194.027458] ADDRCONF(NETDEV_UP): eth2: link is not ready [ 198.498557] apm: BIOS not found. [ 203.236017] eth0: no IPv6 routers present [ 476.798842] ------------[ cut here ]------------ [ 476.798854] WARNING: at /build/buildd-linux-2.6_2.6.32-21-i386-Ullf8h/linux-2.6-2.6.32/debian/build/source_i386_none/kernel/softirq.c:143 _local_bh_enable_ip+0x33/0x6e() [ 476.798858] Hardware name: [ 476.798860] Modules linked in: binfmt_misc fuse loop snd_intel8x0 snd_ac97_codec ac97_bus snd_pcm_oss snd_mixer_oss snd_pcm radeon ttm drm_kms_helper snd_timer drm i2c_algo_bit snd soundcore i2c_i801 ns558 psmouse gameport i2c_core snd_page_alloc rng_core shpchp pcspkr serio_raw evdev parport_pc processor button parport pci_hotplug ext3 jbd mbcache sg sr_mod sd_mod crc_t10dif cdrom ata_generic ata_piix uhci_hcd floppy 3c59x mii libata ehci_hcd thermal thermal_sys scsi_mod usbcore nls_base [last unloaded: scsi_wait_scan] [ 476.798921] Pid: 3767, comm: mii-tool Not tainted 2.6.32-5-686 #1 [ 476.798924] Call Trace: [ 476.798932] [<c102ffd1>] ? warn_slowpath_common+0x5e/0x8a [ 476.798936] [<c1030007>] ? warn_slowpath_null+0xa/0xc [ 476.798940] [<c10352b7>] ? _local_bh_enable_ip+0x33/0x6e [ 476.798949] [<f7f415eb>] ? mdio_read+0xf4/0x110 [3c59x] [ 476.798955] [<f7f2c47a>] ? generic_mii_ioctl+0x61/0xfa [mii] [ 476.798961] [<f7f436bf>] ? vortex_ioctl+0x65/0xa4 [3c59x] [ 476.798966] [<f7f4365a>] ? vortex_ioctl+0x0/0xa4 [3c59x] [ 476.798974] [<c11d9e2c>] ? dev_ifsioc+0x25e/0x278 [ 476.798978] [<c11da31a>] ? dev_ioctl+0x4d4/0x5d6 [ 476.798985] [<c1101ec2>] ? security_sk_alloc+0xd/0xf [ 476.798990] [<c11cb448>] ? sock_ioctl+0x0/0x1ee [ 476.798996] [<c10bcee4>] ? vfs_ioctl+0x1c/0x5f [ 476.799000] [<c10bd478>] ? do_vfs_ioctl+0x4aa/0x4e5 [ 476.799004] [<c11cbb3b>] ? sock_map_fd+0x46/0x50 [ 476.799008] [<c11cc540>] ? sys_socket+0x42/0x56 [ 476.799013] [<c126e4e0>] ? do_page_fault+0x2f1/0x307 [ 476.799018] [<c10bd4f4>] ? sys_ioctl+0x41/0x58 [ 476.799023] [<c10030fb>] ? sysenter_do_call+0x12/0x28 [ 476.799026] ---[ end trace ba2cdd693f0f4446 ]--- The server have 3 network cards (only one have link) ~ # dmesg | grep eth [ 6.416468] udev: renamed network interface eth1 to eth1-eth2 [ 6.417687] udev: renamed network interface eth2 to eth1 [ 6.467553] udev: renamed network interface eth1-eth2 to eth2 [ 193.091097] eth0: setting full-duplex. [ 193.941286] eth1: setting half-duplex. [ 193.941508] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 194.027247] eth2: setting half-duplex. [ 194.027458] ADDRCONF(NETDEV_UP): eth2: link is not ready [ 203.236017] eth0: no IPv6 routers present ~ # lspci -nn| grep -i net 02:00.0 Ethernet controller [0200]: 3Com Corporation 3c905C-TX/TX-M [Tornado] [10b7:9200] (rev 78) 02:02.0 Ethernet controller [0200]: 3Com Corporation 3c905C-TX/TX-M [Tornado] [10b7:9200] (rev 74) 02:03.0 Ethernet controller [0200]: 3Com Corporation 3c905C-TX/TX-M [Tornado] [10b7:9200] (rev 74) Greetings -- System Information: Debian Release: squeeze/sid APT prefers unstable APT policy: (500, 'unstable'), (1, 'experimental') Architecture: i386 (i686) Kernel: Linux 2.6.32-5-686 (SMP w/2 CPU cores) Locale: LANG=es_ES.utf8, LC_CTYPE=es_ES.utf8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages net-tools depends on: ii libc6 2.11.2-5 Embedded GNU C Library: Shared lib net-tools recommends no packages. net-tools suggests no packages. -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
