OK, I suppose the ID is right, but odd, when I plug it in I get "invalid interface number" messages, no matter what port I plug it into.
new full speed USB device using ehci_hcd and address 5 config 1 has an invalid interface number: 1 but max is 0 config 1 has no interface number 0 New USB device found, idVendor=09aa, idProduct=3642 New USB device strings: Mfr=0, Product=0, SerialNumber=1 SerialNumber: 01190006 configuration #1 chosen from 1 choice And then I have to modprobe by hand # modprobe prism2_usb prism2_usb: module is from the staging directory, the quality is unknown, you have been warned. prism2_usb: Checking for firmware prism2_ru.fw usb 1-3.1: firmware: requesting prism2_ru.fw prism2_usb: prism2_ru.fw will be processed, size 90662 CTLX[1] error: state(Request failed) CTLX[1] error: state(Request failed) cmd_initialize() failed on two attempts, results -5 and -5 hfa384x_drvr_start() failed,result=-5 PDA may only be read in the fwload state. load_cardpda failed, exiting. TV> Make sure that you do "modprobe -r prism2_usb" first to remove it TV> before loading it again, and that you try disable/enable just after TV> the modprobe (do not run ifconfig). Please attach the full dmesg TV> output afterwards. # wlanctl-ng wlan0 lnxreq_ifstate ifstate=enable CTLX[1] error: state(Request failed) message=lnxreq_ifstate ifstate=enable resultcode=implementation_failure CTLX[1] error: state(Request failed) cmd_initialize() failed on two attempts, results -5 and -5 hfa384x_drvr_start() failed,result=-5 -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
