Am Donnerstag, 21. Juli 2005 22:48 schrieb Mattia Dongili:
> tags 319387 + moreinfo
> severity 319387 important
> thanks
>
> On Thu, Jul 21, 2005 at 08:19:18PM +0200, Bastian Venthur wrote:
> > Package: xfree86-driver-synaptics
> > Version: 0.14.2-2
> > Severity: serious
> >
> > When booting and starting in kdm, the touchpad works fine, but when kde
> > 3.4 (from alioth) starts after login, the touchpad is disabled again.
> >
> > The only way to get it back to work is:
> >
> > sudo modprobe -r psmouse && sudo modprobe psmouse
> >
> > in kde, and the touchpad is on again.
>
> Could you provide X (/var/log/Xorg.0.log) and kernel (from dmesg) logs?
Ok, here there are
best regards
Bastian
Linux version 2.6.12.2-laptop ([EMAIL PROTECTED]) (gcc-Version 3.3.6 (Debian
1:3.3.6-7)) #1 Sun Jul 3 23:56:17 CEST 2005
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000dff0000 (usable)
BIOS-e820: 000000000dff0000 - 000000000dffffc0 (ACPI data)
BIOS-e820: 000000000dffffc0 - 000000000e000000 (ACPI NVS)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
223MB LOWMEM available.
On node 0 totalpages: 57328
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 53232 pages, LIFO batch:31
HighMem zone: 0 pages, LIFO batch:1
DMI 2.3 present.
ACPI: RSDP (v000 OID_00 ) @ 0x000e4010
ACPI: RSDT (v001 OID_00 RSDT_000 0x30303030 _CSI 0x00010101) @ 0x0dfffbc0
ACPI: FADT (v001 INSYDE FACP_000 0x00000100 _CSI 0x00010101) @ 0x0dfffac0
ACPI: BOOT (v001 INSYDE SYS_BOOT 0x00000100 _CSI 0x00010101) @ 0x0dfffb50
ACPI: DBGP (v001 INSYDE SYS_DBGP 0x00000100 _CSI 0x00010101) @ 0x0dfffb80
ACPI: DSDT (v001 INSYDE VT8362 0x00001000 MSFT 0x0100000d) @ 0x00000000
ACPI: PM-Timer IO Port: 0x1008
Allocating PCI resources starting at 0e000000 (gap: 0e000000:f1f80000)
Built 1 zonelists
Kernel command line: root=/dev/hda1 ro vga=791 video=savagefb:[EMAIL PROTECTED]
bootkb=de
Local APIC disabled by BIOS -- you can enable it with "lapic"
mapped APIC to ffffd000 (011c1000)
Initializing CPU#0
PID hash table entries: 1024 (order: 10, 16384 bytes)
Detected 1200.559 MHz processor.
Using pmtmr for high-res timesource
Console: colour dummy device 80x25
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 223540k/229312k available (1999k kernel code, 5264k reserved, 852k
data, 176k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 2375.68 BogoMIPS (lpj=1187840)
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 0183f9ff c1cbf9ff 00000000 00000000 00000000
00000000 00000000
CPU: After vendor identify, caps: 0183f9ff c1cbf9ff 00000000 00000000 00000000
00000000 00000000
Enabling disabled K7/SSE Support.
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU: After all inits, caps: 0383f9ff c1cbf9ff 00000000 00000020 00000000
00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: AMD mobile AMD Athlon(tm) XP 1400+ stepping 00
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
ACPI: setting ELCR to 0200 (from 0c00)
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xe8a64, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20050309
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
Disabling VIA memory write queue (PCI ID 0305, rev 80): [55] 3c & 1f -> 1c
Boot video device is 0000:01:00.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: Embedded Controller [EC0] (gpe 1)
ACPI: PCI Interrupt Link [LNKA] (IRQs 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs *10)
ACPI: PCI Interrupt Link [LNKD] (IRQs 10 *11)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0c04
pnp: PnP ACPI: found 9 devices
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
PCI: Cannot allocate resource region 0 of device 0000:00:0a.0
pnp: 00:06: ioport range 0x1600-0x167f has been reserved
pnp: 00:06: ioport range 0x2c8-0x2cf has been reserved
pnp: 00:06: ioport range 0x4d0-0x4d1 has been reserved
pnp: 00:06: ioport range 0x1000-0x105f could not be reserved
Simple Boot Flag at 0x37 set to 0x1
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
devfs: 2004-01-31 Richard Gooch ([EMAIL PROTECTED])
devfs: boot_options: 0x0
Initializing Cryptographic API
Applying VIA southbridge workaround.
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) ->
IRQ 11
savagefb: mapped io at ce880000
savagefb: probed videoram: 32768k
savagefb: Detected current MCLK value of 14318 kHz
savagefb: mapped framebuffer at ce980000, pbase == 90000000
savagefb v0.4.0_2.6: 32640kB VRAM, using 1024x768, 48.364kHz, 60Hz
Console: switching to colour frame buffer device 128x48
fb: S3 TwisterK frame buffer device
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected VIA Twister-K/KT133x/KM133 chipset
agpgart: AGP aperture is 64M @ 0xa0000000
[drm] Initialized drm 1.0.0 20040925
PNP: PS/2 Controller [PNP0303:KBC,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:11.1
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt8231 (rev 10) IDE UDMA100 controller on pci0000:00:11.1
ide0: BM-DMA at 0x1100-0x1107, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x1108-0x110f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: IC25N020ATCS04-0, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: MATSHITADVD-ROM SR-8177, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 39070080 sectors (20003 MB) w/1768KiB Cache, CHS=38760/16/63, UDMA(100)
hda: cache flushes not supported
/dev/ide/host0/bus0/target0/lun0: p1 p2 p3
hdc: ATAPI 24X DVD-ROM drive, 256kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
mice: PS/2 mouse device common for all mice
NET: Registered protocol family 2
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
NET: Registered protocol family 8
NET: Registered protocol family 20
ACPI wakeup devices:
LID BAT0 PBTN AUDI MODM USB0 USB1 LAN0
ACPI: (supports S0 S3 S4 S4bios S5)
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 176k freed
kjournald starting. Commit interval 5 seconds
input: AT Translated Set 2 keyboard on isa0060/serio0
NET: Registered protocol family 1
Adding 499960k swap on /dev/hda2. Priority:-1 extents:1
EXT3 FS on hda1, internal journal
Probing IDE interface ide2...
Probing IDE interface ide3...
Probing IDE interface ide4...
Probing IDE interface ide5...
ACPI: CPU0 (power states: C1[C1] C2[C2])
powernow: PowerNOW! Technology present. Can scale: frequency and voltage.
Detected 1200.242 MHz processor.
powernow: SGTC: 10000
powernow: Minimum speed 500 MHz. Maximum speed 1200 MHz.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
alps.c: Enabling hardware tapping
input: PS/2 Mouse on isa0060/serio4
input: AlpsPS/2 ALPS GlidePoint on isa0060/serio4
Linux Kernel Card Services
options: [pci] [cardbus] [pm]
ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKA] -> GSI 11 (level, low) ->
IRQ 11
Yenta: CardBus bridge found at 0000:00:0a.0 [1025:001d]
Yenta O2: res at 0x94/0xD4: 00/ea
Yenta O2: enabling read prefetch/write burst
Yenta: ISA IRQ mask 0x0038, PCI irq 11
Socket status: 30000811
via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker
PCI: Enabling device 0000:00:12.0 (0001 -> 0003)
ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [LNKA] -> GSI 11 (level, low) ->
IRQ 11
eth0: VIA Rhine II at 0x1e800, 00:c0:9f:1d:36:8b, IRQ 11.
eth0: MII PHY found at address 1, status 0x7809 advertising 01e1 Link 0000.
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v2.2
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:11.2[D] -> Link [LNKD] -> GSI 11 (level, low) ->
IRQ 11
uhci_hcd 0000:00:11.2: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
uhci_hcd 0000:00:11.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:11.2: irq 11, io base 0x00001200
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
usb 1-1: new low speed USB device using uhci_hcd and address 2
usbcore: registered new driver hiddev
input: USB HID v1.00 Mouse [PS/2+USB Mouse] on usb-0000:00:11.2-1
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.01:USB HID core driver
parport_pc: VIA 686A/8231 detected
parport_pc: probing current configuration
parport_pc: Current parallel port base: 0x378
parport0: PC-style at 0x378 (0x778), irq 7, using FIFO
[PCSPP,TRISTATE,COMPAT,ECP]
parport_pc: VIA parallel port: io=0x378, irq=7
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [LNKC] -> GSI 10 (level, low) ->
IRQ 10
PCI: Setting latency timer of device 0000:00:11.5 to 64
Real Time Clock Driver v1.12
input: PC Speaker
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
ACPI: Battery Slot [BAT0] (battery present)
ACPI: AC Adapter [ADP0] (on-line)
ACPI: Power Button (FF) [PWRF]
ACPI: Lid Switch [LID]
ACPI: Thermal Zone [THRM] (39 C)
NET: Registered protocol family 10
Disabled Privacy Extensions on device c03975c0(lo)
IPv6 over IPv4 tunneling driver
eth0: link down
cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xcffff 0xd4000-0xd7fff
0xe0000-0xfffff
orinoco 0.14alpha2 (David Gibson <[EMAIL PROTECTED]>, Pavel Roskin <[EMAIL
PROTECTED]>, et al)
orinoco_cs 0.14alpha2 (David Gibson <[EMAIL PROTECTED]>, Pavel Roskin <[EMAIL
PROTECTED]>, et al)
eth1: Hardware identity 800c:0000:0001:0000
eth1: Station identity 001f:0006:0001:0003
eth1: Firmware determined as Intersil 1.3.6
eth1: Ad-hoc demo mode supported
eth1: IEEE standard IBSS ad-hoc mode supported
eth1: WEP supported, 104-bit key
eth1: MAC address 00:01:24:C0:11:51
eth1: Station name "Prism I"
eth1: ready
eth1: index 0x01: Vcc 3.3, irq 11, io 0x0100-0x013f
eth1: This firmware requires an ESSID in IBSS-Ad-Hoc mode.
eth1: New link status: Disconnected (0002)
eth1: This firmware requires an ESSID in IBSS-Ad-Hoc mode.
eth1: This firmware requires an ESSID in IBSS-Ad-Hoc mode.
eth1: This firmware requires an ESSID in IBSS-Ad-Hoc mode.
eth1: This firmware requires an ESSID in IBSS-Ad-Hoc mode.
eth1: This firmware requires an ESSID in IBSS-Ad-Hoc mode.
eth1: This firmware requires an ESSID in IBSS-Ad-Hoc mode.
eth1: This firmware requires an ESSID in IBSS-Ad-Hoc mode.
eth1: New link status: Connected (0001)
NET: Registered protocol family 17
eth0: no IPv6 routers present
eth1: no IPv6 routers present
alps.c: Enabling hardware tapping
input: PS/2 Mouse on isa0060/serio4
input: AlpsPS/2 ALPS GlidePoint on isa0060/serio4
X Window System Version 6.8.2 (Debian 6.8.2.dfsg.1-3 20050717163638 [EMAIL PROTECTED])
Release Date: 9 February 2005
X Protocol Version 11, Revision 0, Release 6.8.2
Build Operating System: Linux 2.6.11-1-686 i686 [ELF]
Current Operating System: Linux chaos 2.6.12.2-laptop #1 Sun Jul 3 23:56:17 CEST 2005 i686
Build Date: 17 July 2005
Before reporting problems, check http://wiki.X.Org
to make sure that you have the latest version.
Module Loader present
OS Kernel: Linux version 2.6.12.2-laptop ([EMAIL PROTECTED]) (gcc-Version 3.3.6 (Debian 1:3.3.6-7)) #1 Sun Jul 3 23:56:17 CEST 2005
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Jul 22 06:31:23 2005
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Default Layout"
(**) |-->Screen "Default Screen" (0)
(**) | |-->Monitor "Standardbildschirm"
(**) | |-->Device "S3 Inc. VT8636A [ProSavage KN133] AGP4X VGA Controller (TwisterK)"
(**) |-->Input Device "Generic Keyboard"
(**) Option "XkbRules" "xorg"
(**) XKB: rules: "xorg"
(**) Option "XkbModel" "pc105"
(**) XKB: model: "pc105"
(**) Option "XkbLayout" "de"
(**) XKB: layout: "de"
(**) Option "XkbVariant" "nodeadkeys"
(**) XKB: variant: "nodeadkeys"
(==) Keyboard: CustomKeycode disabled
(**) |-->Input Device "Configured Mouse"
(**) |-->Input Device "Synaptics Touchpad"
(==) |-->Input Device "Configured Mouse"
(WW) The core pointer device wasn't specified explicitly in the layout.
Using the first mouse device.
(WW) The directory "/usr/lib/X11/fonts/cyrillic" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/lib/X11/fonts/CID" does not exist.
Entry deleted from font path.
(**) FontPath set to "unix/:7100,/usr/lib/X11/fonts/misc,/usr/lib/X11/fonts/100dpi/:unscaled,/usr/lib/X11/fonts/75dpi/:unscaled,/usr/lib/X11/fonts/Type1,/usr/lib/X11/fonts/100dpi,/usr/lib/X11/fonts/75dpi"
(==) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(WW) Open APM failed (/dev/apm_bios) (No such file or directory)
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.2
X.Org Video Driver: 0.7
X.Org XInput driver : 0.4
X.Org Server Extension : 0.2
X.Org Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.7
(++) using VT number 7
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1106,0305 card 1025,001d rev 80 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 1106,8305 card 1025,001d rev 00 class 06,04,00 hdr 01
(II) PCI: 00:0a:0: chip 1217,6972 card 4001,0000 rev 00 class 06,07,00 hdr 02
(II) PCI: 00:11:0: chip 1106,8231 card 1025,001d rev 10 class 06,01,00 hdr 80
(II) PCI: 00:11:1: chip 1106,0571 card 1025,001d rev 06 class 01,01,8a hdr 00
(II) PCI: 00:11:2: chip 1106,3038 card 1025,001d rev 1e class 0c,03,00 hdr 00
(II) PCI: 00:11:4: chip 1106,8235 card 1025,001d rev 10 class 06,80,00 hdr 00
(II) PCI: 00:11:5: chip 1106,3058 card 1025,001d rev 40 class 04,01,00 hdr 00
(II) PCI: 00:11:6: chip 1106,3068 card 1025,001d rev 20 class 07,80,00 hdr 00
(II) PCI: 00:12:0: chip 1106,3065 card 1025,001d rev 51 class 02,00,00 hdr 00
(II) PCI: 01:00:0: chip 5333,8d02 card 1025,001d rev 01 class 03,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,2), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 1 I/O range:
[0] -1 0 0x0000c000 - 0x0000dfff (0x2000) IX[B]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xe0000000 - 0xefffffff (0x10000000) MX[B]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0x90000000 - 0x9fffffff (0x10000000) MX[B]
(II) PCI-to-CardBus bridge:
(II) Bus 2: bridge is at (0:10:0), (0,2,5), BCTRL: 0x0500 (VGA_EN is cleared)
(II) Bus 2 I/O range:
[0] -1 0 0x00004000 - 0x000040ff (0x100) IX[B]
[1] -1 0 0x00004400 - 0x000044ff (0x100) IX[B]
(II) Bus 2 non-prefetchable memory range:
[0] -1 0 0x0e800000 - 0x0ebfffff (0x400000) MX[B]
(II) Bus 2 prefetchable memory range:
[0] -1 0 0x0e400000 - 0x0e7fffff (0x400000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:17:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(1:0:0) S3 Inc. VT8636A [ProSavage KN133] AGP4X VGA Controller (TwisterK) rev 1, Mem @ 0xe0000000/19, 0x90000000/27, BIOS @ 0x000c0000/16
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) PCI Memory resource overlap reduced 0xa0000000 from 0xa3ffffff to 0x9fffffff
(II) Active PCI resource ranges:
[0] -1 0 0xf0000000 - 0xf00000ff (0x100) MX[B]
[1] -1 0 0xa0000000 - 0x9fffffff (0x0) MX[B]O
[2] -1 0 0x000c0000 - 0x000cffff (0x10000) MX[B](B)
[3] -1 0 0x90000000 - 0x97ffffff (0x8000000) MX[B](B)
[4] -1 0 0xe0000000 - 0xe007ffff (0x80000) MX[B](B)
[5] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[B]
[6] -1 0 0x0000e200 - 0x0000e2ff (0x100) IX[B]
[7] -1 0 0x0000e104 - 0x0000e107 (0x4) IX[B]
[8] -1 0 0x0000e100 - 0x0000e103 (0x4) IX[B]
[9] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[B]
[10] -1 0 0x00001200 - 0x0000121f (0x20) IX[B]
[11] -1 0 0x00001100 - 0x0000110f (0x10) IX[B]
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xf0000000 - 0xf00000ff (0x100) MX[B]
[1] -1 0 0xa0000000 - 0x9fffffff (0x0) MX[B]O
[2] -1 0 0x000c0000 - 0x000cffff (0x10000) MX[B](B)
[3] -1 0 0x90000000 - 0x97ffffff (0x8000000) MX[B](B)
[4] -1 0 0xe0000000 - 0xe007ffff (0x80000) MX[B](B)
[5] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[B]
[6] -1 0 0x0000e200 - 0x0000e2ff (0x100) IX[B]
[7] -1 0 0x0000e104 - 0x0000e107 (0x4) IX[B]
[8] -1 0 0x0000e100 - 0x0000e103 (0x4) IX[B]
[9] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[B]
[10] -1 0 0x00001200 - 0x0000121f (0x20) IX[B]
[11] -1 0 0x00001100 - 0x0000110f (0x10) IX[B]
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000cffff (0x10000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000cffff (0x10000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xf0000000 - 0xf00000ff (0x100) MX[B]
[6] -1 0 0xa0000000 - 0x9fffffff (0x0) MX[B]O
[7] -1 0 0x000c0000 - 0x000cffff (0x10000) MX[B](B)
[8] -1 0 0x90000000 - 0x97ffffff (0x8000000) MX[B](B)
[9] -1 0 0xe0000000 - 0xe007ffff (0x80000) MX[B](B)
[10] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[11] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[12] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[B]
[13] -1 0 0x0000e200 - 0x0000e2ff (0x100) IX[B]
[14] -1 0 0x0000e104 - 0x0000e107 (0x4) IX[B]
[15] -1 0 0x0000e100 - 0x0000e103 (0x4) IX[B]
[16] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[B]
[17] -1 0 0x00001200 - 0x0000121f (0x20) IX[B]
[18] -1 0 0x00001100 - 0x0000110f (0x10) IX[B]
(II) LoadModule: "bitmap"
(II) Reloading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Loading font Bitmap
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "dri"
(II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
(II) Module dri: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/X11R6/lib/modules/linux/libdrm.a
(II) Module drm: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension XFree86-DRI
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 6.8.2, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
Skipping "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_clip.o": No symbols found
Skipping "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_norm.o": No symbols found
Skipping "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_xform.o": No symbols found
(II) Module GLcore: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension GLX
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "record"
(II) Loading /usr/X11R6/lib/modules/extensions/librecord.a
(II) Module record: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension RECORD
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.2
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "vbe"
(II) Loading /usr/X11R6/lib/modules/libvbe.a
(II) Module vbe: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.1.0
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "savage"
(II) Loading /usr/X11R6/lib/modules/drivers/savage_drv.o
(II) Module savage: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.1.27
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "keyboard"
(II) Loading /usr/X11R6/lib/modules/input/keyboard_drv.o
(II) Module keyboard: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.4
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.4
(II) LoadModule: "synaptics"
(II) Loading /usr/X11R6/lib/modules/input/synaptics_drv.o
(II) Module synaptics: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
Module class: XFree86 XInput Driver
ABI class: XFree86 XInput driver, version 0.3
(II) SAVAGE: driver (version 1.1.27) for S3 Savage chipsets: Savage4,
Savage3D, Savage3D-MV, Savage2000, Savage/MX-MV, Savage/MX,
Savage/IX-MV, Savage/IX, ProSavage PM133, ProSavage KM133,
Twister PN133, Twister KN133, SuperSavage/MX 128, SuperSavage/MX 64,
SuperSavage/MX 64C, SuperSavage/IX 128, SuperSavage/IX 128,
SuperSavage/IX 64, SuperSavage/IX 64, SuperSavage/IXC 64,
SuperSavage/IXC 64, ProSavage DDR, ProSavage DDR-K
(II) Primary Device is: PCI 01:00:0
(--) Chipset ProSavage found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000cffff (0x10000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xf0000000 - 0xf00000ff (0x100) MX[B]
[6] -1 0 0xa0000000 - 0x9fffffff (0x0) MX[B]O
[7] -1 0 0x000c0000 - 0x000cffff (0x10000) MX[B](B)
[8] -1 0 0x90000000 - 0x97ffffff (0x8000000) MX[B](B)
[9] -1 0 0xe0000000 - 0xe007ffff (0x80000) MX[B](B)
[10] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[11] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[12] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[B]
[13] -1 0 0x0000e200 - 0x0000e2ff (0x100) IX[B]
[14] -1 0 0x0000e104 - 0x0000e107 (0x4) IX[B]
[15] -1 0 0x0000e100 - 0x0000e103 (0x4) IX[B]
[16] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[B]
[17] -1 0 0x00001200 - 0x0000121f (0x20) IX[B]
[18] -1 0 0x00001100 - 0x0000110f (0x10) IX[B]
(II) resource ranges after probing:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000cffff (0x10000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xf0000000 - 0xf00000ff (0x100) MX[B]
[6] -1 0 0xa0000000 - 0x9fffffff (0x0) MX[B]O
[7] -1 0 0x000c0000 - 0x000cffff (0x10000) MX[B](B)
[8] -1 0 0x90000000 - 0x97ffffff (0x8000000) MX[B](B)
[9] -1 0 0xe0000000 - 0xe007ffff (0x80000) MX[B](B)
[10] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[11] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[12] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[13] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[14] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[15] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[B]
[16] -1 0 0x0000e200 - 0x0000e2ff (0x100) IX[B]
[17] -1 0 0x0000e104 - 0x0000e107 (0x4) IX[B]
[18] -1 0 0x0000e100 - 0x0000e103 (0x4) IX[B]
[19] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[B]
[20] -1 0 0x00001200 - 0x0000121f (0x20) IX[B]
[21] -1 0 0x00001100 - 0x0000110f (0x10) IX[B]
[22] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[23] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 0.1.0
ABI class: X.Org Video Driver, version 0.7
(**) SAVAGE(0): Depth 24, (--) framebuffer bpp 32
(==) SAVAGE(0): RGB weight 888
(==) SAVAGE(0): Default visual is TrueColor
(II) SAVAGE(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(==) SAVAGE(0): Using HW cursor
(==) SAVAGE(0): Using video BIOS to set modes
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Reloading /usr/X11R6/lib/modules/libvbe.a
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/X11R6/lib/modules/linux/libint10.a
(II) SAVAGE(0): initializing int10
(II) SAVAGE(0): Primary V_BIOS segment is: 0xc000
(II) SAVAGE(0): VESA BIOS detected
(II) SAVAGE(0): VESA VBE Version 2.0
(II) SAVAGE(0): VESA VBE Total Mem: 31680 kB
(II) SAVAGE(0): VESA VBE OEM: S3 Incorporated. Twister BIOS
(II) SAVAGE(0): VESA VBE OEM Software Rev: 1.0
(II) SAVAGE(0): VESA VBE OEM Vendor: S3 Incorporated.
(II) SAVAGE(0): VESA VBE OEM Product: VBE 2.0
(II) SAVAGE(0): VESA VBE OEM Product Rev: Rev 1.1
(--) SAVAGE(0): Chip: id 8d02, "Twister KN133"
(--) SAVAGE(0): Engine: "ProSavage"
(--) SAVAGE(0): mapping MMIO @ 0xe0000000 with size 0x80000
(==) SAVAGE(0): Using gamma correction (1.0, 1.0, 1.0)
(--) SAVAGE(0): probed videoram: 32768k
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Reloading /usr/X11R6/lib/modules/libddc.a
(II) SAVAGE(0): VESA VBE DDC supported
(II) SAVAGE(0): VESA VBE DDC Level none
(II) SAVAGE(0): VESA VBE DDC transfer in appr. 0 sec.
(II) SAVAGE(0): VESA VBE DDC read failed
(--) SAVAGE(0): Detected current MCLK value of 25.256 MHz
(II) SAVAGE(0): Standardbildschirm: Using hsync range of 28.00-49.00 kHz
(II) SAVAGE(0): Standardbildschirm: Using vrefresh range of 43.00-72.00 Hz
(II) SAVAGE(0): Clock range: 10.00 to 220.00 MHz
(II) SAVAGE(0): Not using default mode "640x350" (vrefresh out of range)
(II) SAVAGE(0): Not using default mode "320x175" (vrefresh out of range)
(II) SAVAGE(0): Not using default mode "640x400" (vrefresh out of range)
(II) SAVAGE(0): Not using default mode "320x200" (vrefresh out of range)
(II) SAVAGE(0): Not using default mode "720x400" (vrefresh out of range)
(II) SAVAGE(0): Not using default mode "360x200" (vrefresh out of range)
(II) SAVAGE(0): Not using default mode "640x480" (vrefresh out of range)
(II) SAVAGE(0): Not using default mode "320x240" (vrefresh out of range)
(II) SAVAGE(0): Not using default mode "640x480" (vrefresh out of range)
(II) SAVAGE(0): Not using default mode "320x240" (vrefresh out of range)
(II) SAVAGE(0): Not using default mode "640x480" (vrefresh out of range)
(II) SAVAGE(0): Not using default mode "320x240" (vrefresh out of range)
(II) SAVAGE(0): Not using default mode "800x600" (vrefresh out of range)
(II) SAVAGE(0): Not using default mode "400x300" (vrefresh out of range)
(II) SAVAGE(0): Not using default mode "800x600" (hsync out of range)
(II) SAVAGE(0): Not using default mode "400x300" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1024x768" (vrefresh out of range)
(II) SAVAGE(0): Not using default mode "512x384" (vrefresh out of range)
(II) SAVAGE(0): Not using default mode "1024x768" (hsync out of range)
(II) SAVAGE(0): Not using default mode "512x384" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1024x768" (hsync out of range)
(II) SAVAGE(0): Not using default mode "512x384" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1024x768" (hsync out of range)
(II) SAVAGE(0): Not using default mode "512x384" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1152x864" (hsync out of range)
(II) SAVAGE(0): Not using default mode "576x432" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1280x960" (hsync out of range)
(II) SAVAGE(0): Not using default mode "640x480" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1280x960" (hsync out of range)
(II) SAVAGE(0): Not using default mode "640x480" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1280x1024" (hsync out of range)
(II) SAVAGE(0): Not using default mode "640x512" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1280x1024" (hsync out of range)
(II) SAVAGE(0): Not using default mode "640x512" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1280x1024" (hsync out of range)
(II) SAVAGE(0): Not using default mode "640x512" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1600x1200" (hsync out of range)
(II) SAVAGE(0): Not using default mode "800x600" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1600x1200" (hsync out of range)
(II) SAVAGE(0): Not using default mode "800x600" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1600x1200" (hsync out of range)
(II) SAVAGE(0): Not using default mode "800x600" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1600x1200" (hsync out of range)
(II) SAVAGE(0): Not using default mode "800x600" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) SAVAGE(0): Not using default mode "800x600" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1792x1344" (hsync out of range)
(II) SAVAGE(0): Not using default mode "896x672" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1792x1344" (bad mode clock/interlace/doublescan)
(II) SAVAGE(0): Not using default mode "896x672" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1856x1392" (hsync out of range)
(II) SAVAGE(0): Not using default mode "928x696" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1856x1392" (bad mode clock/interlace/doublescan)
(II) SAVAGE(0): Not using default mode "928x696" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) SAVAGE(0): Not using default mode "960x720" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) SAVAGE(0): Not using default mode "960x720" (hsync out of range)
(II) SAVAGE(0): Not using default mode "832x624" (hsync out of range)
(II) SAVAGE(0): Not using default mode "416x312" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1280x800" (hsync out of range)
(II) SAVAGE(0): Not using default mode "640x400" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1152x864" (hsync out of range)
(II) SAVAGE(0): Not using default mode "576x432" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1400x1050" (hsync out of range)
(II) SAVAGE(0): Not using default mode "700x525" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1400x1050" (hsync out of range)
(II) SAVAGE(0): Not using default mode "700x525" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1400x1050" (hsync out of range)
(II) SAVAGE(0): Not using default mode "700x525" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1400x1050" (hsync out of range)
(II) SAVAGE(0): Not using default mode "700x525" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1440x900" (hsync out of range)
(II) SAVAGE(0): Not using default mode "720x450" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1600x1024" (hsync out of range)
(II) SAVAGE(0): Not using default mode "800x512" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1680x1050" (hsync out of range)
(II) SAVAGE(0): Not using default mode "840x525" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1920x1200" (hsync out of range)
(II) SAVAGE(0): Not using default mode "960x600" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1920x1200" (bad mode clock/interlace/doublescan)
(II) SAVAGE(0): Not using default mode "960x600" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) SAVAGE(0): Not using default mode "960x720" (hsync out of range)
(II) SAVAGE(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) SAVAGE(0): Not using default mode "1024x768" (hsync out of range)
(II) SAVAGE(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) SAVAGE(0): Not using default mode "1024x768" (hsync out of range)
(II) SAVAGE(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) SAVAGE(0): Not using default mode "1024x768" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1280x768" (width too large for virtual size)
(II) SAVAGE(0): Not using default mode "1152x768" (width too large for virtual size)
(--) SAVAGE(0): Found 11 modes at this depth:
[10f] 320 x 200, 70Hz
[112] 640 x 480, 60Hz, 72Hz, 75Hz, 85Hz
[115] 800 x 600, 60Hz, 72Hz, 75Hz, 85Hz
[118] 1024 x 768, 60Hz, 70Hz, 75Hz, 85Hz
[11b] 1280 x 1024, 60Hz, 75Hz
[11e] 640 x 400, 70Hz
[124] 1600 x 1200, 60Hz
[134] 320 x 240, 72Hz
[13e] 1400 x 1050, 60Hz, 75Hz
[144] 400 x 300, 72Hz
[154] 512 x 384, 70Hz
(--) SAVAGE(0): Virtual size is 1024x768 (pitch 1024)
(**) SAVAGE(0): *Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
(II) SAVAGE(0): Modeline "1024x768" 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
(**) SAVAGE(0): *Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz
(II) SAVAGE(0): Modeline "800x600" 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync
(**) SAVAGE(0): *Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz
(II) SAVAGE(0): Modeline "640x480" 25.20 640 656 752 800 480 490 492 525 -hsync -vsync
(**) SAVAGE(0): Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) SAVAGE(0): Modeline "800x600" 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync
(**) SAVAGE(0): Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
(II) SAVAGE(0): Modeline "800x600" 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync
(**) SAVAGE(0): Default mode "640x384": 40.1 MHz, 47.7 kHz, 60.1 Hz (D)
(II) SAVAGE(0): Modeline "640x384" 40.07 640 672 740 840 384 384 386 397 doublescan
(**) SAVAGE(0): Default mode "576x384": 32.5 MHz, 44.2 kHz, 54.8 Hz (D)
(II) SAVAGE(0): Modeline "576x384" 32.50 576 589 657 736 384 385 388 403 doublescan +hsync +vsync
(**) SAVAGE(0): Default mode "512x384": 32.5 MHz, 48.4 kHz, 60.0 Hz (D)
(II) SAVAGE(0): Modeline "512x384" 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync
(**) SAVAGE(0): Default mode "400x300": 25.0 MHz, 48.1 kHz, 72.2 Hz (D)
(II) SAVAGE(0): Modeline "400x300" 25.00 400 428 488 520 300 318 321 333 doublescan +hsync +vsync
(**) SAVAGE(0): Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D)
(II) SAVAGE(0): Modeline "400x300" 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync
(**) SAVAGE(0): Default mode "400x300": 18.0 MHz, 35.2 kHz, 56.3 Hz (D)
(II) SAVAGE(0): Modeline "400x300" 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync
(**) SAVAGE(0): Default mode "320x240": 12.6 MHz, 31.5 kHz, 60.1 Hz (D)
(II) SAVAGE(0): Modeline "320x240" 12.60 320 328 376 400 240 245 246 262 doublescan -hsync -vsync
(==) SAVAGE(0): DPI set to (75, 75)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
Skipping "/usr/X11R6/lib/modules/libfb.a:fbmmx.o": No symbols found
(II) Module fb: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.2
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.2.0
ABI class: X.Org Video Driver, version 0.7
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 0.1.0
ABI class: X.Org Video Driver, version 0.7
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0x90000000 - 0x97ffffff (0x8000000) MS[B]
[1] 0 0 0xe0000000 - 0xe007ffff (0x80000) MS[B]
[2] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[3] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[4] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[5] -1 0 0x000c0000 - 0x000cffff (0x10000) MX[B]
[6] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[7] -1 0 0xf0000000 - 0xf00000ff (0x100) MX[B]
[8] -1 0 0xa0000000 - 0x9fffffff (0x0) MX[B]O
[9] -1 0 0x000c0000 - 0x000cffff (0x10000) MX[B](B)
[10] -1 0 0x90000000 - 0x97ffffff (0x8000000) MX[B](B)
[11] -1 0 0xe0000000 - 0xe007ffff (0x80000) MX[B](B)
[12] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
[13] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
[14] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
[15] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[16] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[17] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[B]
[18] -1 0 0x0000e200 - 0x0000e2ff (0x100) IX[B]
[19] -1 0 0x0000e104 - 0x0000e107 (0x4) IX[B]
[20] -1 0 0x0000e100 - 0x0000e103 (0x4) IX[B]
[21] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[B]
[22] -1 0 0x00001200 - 0x0000121f (0x20) IX[B]
[23] -1 0 0x00001100 - 0x0000110f (0x10) IX[B]
[24] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
[25] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/X11R6/lib/modules/linux/libint10.a
(II) SAVAGE(0): initializing int10
(II) SAVAGE(0): Primary V_BIOS segment is: 0xc000
(II) SAVAGE(0): VESA BIOS detected
(II) SAVAGE(0): VESA VBE Version 2.0
(II) SAVAGE(0): VESA VBE Total Mem: 31680 kB
(II) SAVAGE(0): VESA VBE OEM: S3 Incorporated. Twister BIOS
(II) SAVAGE(0): VESA VBE OEM Software Rev: 1.0
(II) SAVAGE(0): VESA VBE OEM Vendor: S3 Incorporated.
(II) SAVAGE(0): VESA VBE OEM Product: VBE 2.0
(II) SAVAGE(0): VESA VBE OEM Product Rev: Rev 1.1
(--) SAVAGE(0): mapping framebuffer @ 0x90000000 with size 0x2000000
(==) SAVAGE(0): Write-combining range (0x90000000,0x2000000)
(--) SAVAGE(0): Chose mode 118 at 60Hz.
(II) SAVAGE(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) SAVAGE(0): Using 1279 lines for offscreen memory.
(II) SAVAGE(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Lines
Image Writes
Offscreen Pixmaps
Setting up tile and stipple cache:
32 128x128 slots
10 256x256 slots
(==) SAVAGE(0): Backing store disabled
(**) Option "dpms"
(**) SAVAGE(0): DPMS enabled
(WW) SAVAGE(0): Option "UseFBDev" is not used
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(**) Generic Keyboard: Core Keyboard
(**) Option "Protocol" "standard"
(**) Generic Keyboard: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Generic Keyboard: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Generic Keyboard: XkbModel: "pc105"
(**) Option "XkbLayout" "de"
(**) Generic Keyboard: XkbLayout: "de"
(**) Option "XkbVariant" "nodeadkeys"
(**) Generic Keyboard: XkbVariant: "nodeadkeys"
(**) Option "CustomKeycodes" "off"
(**) Generic Keyboard: CustomKeycodes disabled
(**) Option "Protocol" "ImPS/2"
(**) Configured Mouse: Device: "/dev/input/mice"
(**) Configured Mouse: Protocol: "ImPS/2"
(**) Option "Device" "/dev/input/mice"
(**) Option "Emulate3Buttons" "true"
(**) Configured Mouse: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) Configured Mouse: ZAxisMapping: buttons 4 and 5
(**) Configured Mouse: Buttons: 5
(II) Synaptics touchpad driver version 0.14.2
(--) Synaptics Touchpad auto-dev sets device to /dev/input/event2
(**) Option "Device" "/dev/input/event2"
(**) Option "SHMConfig" "on"
(**) Option "LeftEdge" "60"
(**) Option "RightEdge" "830"
(**) Option "TopEdge" "70"
(**) Option "BottomEdge" "650"
(**) Option "FingerLow" "25"
(**) Option "FingerHigh" "30"
(**) Option "MaxTapTime" "180"
(**) Option "MaxTapMove" "220"
(**) Option "VertScrollDelta" "100"
(**) Option "HorizScrollDelta" "0"
(**) Option "Repeater" "/dev/ps2mouse"
(**) Option "UpDownScrolling" "1"
(**) Option "TouchpadOff" "0"
(**) Option "Device" "/dev/ps2mouse"
(--) Synaptics Touchpad touchpad found
(**) Configured Mouse: Device: "/dev/input/mice"
(**) Configured Mouse: Protocol: "ImPS/2"
(**) Option "CorePointer"
(**) Configured Mouse: Core Pointer
(**) Option "Device" "/dev/input/mice"
(**) Option "Emulate3Buttons" "true"
(**) Configured Mouse: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) Configured Mouse: ZAxisMapping: buttons 4 and 5
(**) Configured Mouse: Buttons: 5
(II) XINPUT: Adding extended input device "Configured Mouse" (type: MOUSE)
(II) XINPUT: Adding extended input device "Synaptics Touchpad" (type: MOUSE)
(II) XINPUT: Adding extended input device "Configured Mouse" (type: MOUSE)
(II) XINPUT: Adding extended input device "Generic Keyboard" (type: KEYBOARD)
Synaptics DeviceInit called
SynapticsCtrl called.
(II) Configured Mouse: ps2EnableDataReporting: succeeded
Warning: font renderer for ".pcf" already registered at priority 0
Warning: font renderer for ".pcf.Z" already registered at priority 0
Warning: font renderer for ".pcf.gz" already registered at priority 0
Warning: font renderer for ".snf" already registered at priority 0
Warning: font renderer for ".snf.Z" already registered at priority 0
Warning: font renderer for ".snf.gz" already registered at priority 0
Warning: font renderer for ".bdf" already registered at priority 0
Warning: font renderer for ".bdf.Z" already registered at priority 0
Warning: font renderer for ".bdf.gz" already registered at priority 0
Warning: font renderer for ".pmf" already registered at priority 0
Could not init font path element unix/:7100, removing from list!
SetClientVersion: 0 9
(II) Configured Mouse: ps2EnableDataReporting: succeeded
Synaptics DeviceOn called
(--) Synaptics Touchpad touchpad found
