Here are my most recent tests, all with ndiswrapper 1.54:
I had just done modprobe -r ndiswrapper, unplugged the device an
installed the ndiswrapper-module for version 1.54. Then I:
1. Connected the card:
/var/log/syslog:
Mar 22 00:17:59 C-5 kernel: [20379.930964] usb 2-2: new full speed USB
device using uhci_hcd and address 4
Mar 22 00:17:59 C-5 kernel: [20380.103887] usb 2-2: configuration #1
chosen from 1 choice
Mar 22 00:17:59 C-5 kernel: [20380.103887] usb 2-2: New USB device
found, idVendor=13b1, idProduct=000e
Mar 22 00:17:59 C-5 kernel: [20380.103887] usb 2-2: New USB device
strings: Mfr=1, Product=2, SerialNumber=3
Mar 22 00:17:59 C-5 kernel: [20380.103887] usb 2-2: Product: Linksys
Wireless-G USB Network Adapter with SpeedBooster
Mar 22 00:17:59 C-5 kernel: [20380.103887] usb 2-2: Manufacturer: Cisco-Linksys
Mar 22 00:17:59 C-5 kernel: [20380.103887] usb 2-2: SerialNumber: 1111
2.:
# lsmod | grep ndis
# modprobe -v ndiswrapper
insmod /lib/modules/2.6.26-1-686/misc/ndiswrapper.ko
/var/log/syslog:
Mar 22 00:18:22 C-5 kernel: [20407.830095] ndiswrapper version 1.54
loaded (smp=yes, preempt=no)
Mar 22 00:18:22 C-5 kernel: [20408.026309] usb 2-2: reset full speed
USB device using uhci_hcd and address 4
Mar 22 00:18:22 C-5 kernel: [20408.220945] ndiswrapper: driver
wusb54gs (Linksys,06/18/2004, 3.60.9.0) loaded
Mar 22 00:18:22 C-5 kernel: [20408.221224] ndiswrapper (mp_init:210):
assuming WDM (non-NDIS) driver
Mar 22 00:18:22 C-5 kernel: [20408.221278] usbcore: registered new
interface driver ndiswrapper
3.:
# ifconfig
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:269 errors:0 dropped:0 overruns:0 frame:0
TX packets:269 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:32461 (31.7 KiB) TX bytes:32461 (31.7 KiB)
# iwconfig
lo no wireless extensions.
eth1 no wireless extensions.
# ifconfig -a
eth1 Link encap:Ethernet HWaddr 00:11:2f:3b:9a:42
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
Interrupt:17
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:269 errors:0 dropped:0 overruns:0 frame:0
TX packets:269 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:32461 (31.7 KiB) TX bytes:32461 (31.7 KiB)
#
After a reboot ndiswrapper appeared at lsmod even with the card
disconnected (I suppose this is normal (?)).
When I connected the card:
1.:
/var/log/syslog:
Mar 22 00:34:34 C-5 kernel: [ 98.620000] usb 2-2: new full speed USB
device using uhci_hcd and address 3
Mar 22 00:34:34 C-5 kernel: [ 98.792831] usb 2-2: configuration #1
chosen from 1 choice
Mar 22 00:34:35 C-5 kernel: [ 98.912773] usb 2-2: reset full speed
USB device using uhci_hcd and address 3
Mar 22 00:34:35 C-5 kernel: [ 99.108836] ndiswrapper: driver
wusb54gs (Linksys,06/18/2004, 3.60.9.0) loaded
Mar 22 00:34:35 C-5 kernel: [ 99.108836] ndiswrapper (mp_init:210):
assuming WDM (non-NDIS) driver
Mar 22 00:34:35 C-5 kernel: [ 99.108836] usb 2-2: New USB device
found, idVendor=13b1, idProduct=000e
Mar 22 00:34:35 C-5 kernel: [ 99.108836] usb 2-2: New USB device
strings: Mfr=1, Product=2, SerialNumber=3
Mar 22 00:34:35 C-5 kernel: [ 99.108836] usb 2-2: Product: Linksys
Wireless-G USB Network Adapter with SpeedBooster
Mar 22 00:34:35 C-5 kernel: [ 99.108836] usb 2-2: Manufacturer: Cisco-Linksys
Mar 22 00:34:35 C-5 kernel: [ 99.108836] usb 2-2: SerialNumber: 1111
2.:
# ifconfig -a
eth1 Link encap:Ethernet HWaddr 00:11:2f:3b:9a:42
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
Interrupt:17
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:6 errors:0 dropped:0 overruns:0 frame:0
TX packets:6 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:300 (300.0 B) TX bytes:300 (300.0 B)
# iwconfig
lo no wireless extensions.
eth1 no wireless extensions.
# modprobe -rv ndiswrapper
rmmod /lib/modules/2.6.26-1-686/misc/ndiswrapper.ko
Segmentation fault
/var/log/syslog:
Mar 22 00:36:53 C-5 kernel: [ 255.567201] usbcore: deregistering
interface driver ndiswrapper
3.:
# lsmod | grep ndiswrapper
ndiswrapper 152700 0
usbcore 118160 4 ndiswrapper,sqcam,uhci_hcd
# modprobe -rv ndiswrapper
The console got stuck here. I rebooted the computer and reinstalled
ndiswrapper 1.53 to be able to use the network again.
Regards,
Luís Picciochi
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
