Package: ndiswrapper-source Version: 1.54-1 Severity: important ndiswrapper 1.54 compiles well with the 2.6.28 kernel at the unstable repositories. However, after loading the module the wlan0 device does not show up. If I reboot to the older 2.6.26 kernel, everything runs fine and the device shows up at ifconfig and iwconfig. After rebooting to 2.6.28, there's no wlan0 device anymore.
/var/log/syslog right after booting and then plugging the wireless adapter: with 2.6.26: Mar 20 00:17:18 C-5 kernel: [ 561.587939] usb 2-2: new full speed USB device using uhci_hcd and address 4 Mar 20 00:17:19 C-5 kernel: [ 561.803840] usb 2-2: configuration #1 chosen from 1 choice Mar 20 00:17:19 C-5 kernel: [ 561.835840] usb 2-2: New USB device found, idVendor=13b1, idProduct=000e Mar 20 00:17:19 C-5 kernel: [ 561.835840] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Mar 20 00:17:19 C-5 kernel: [ 561.835840] usb 2-2: Product: Linksys Wireless-G USB Network Adapter with SpeedBooster Mar 20 00:17:19 C-5 kernel: [ 561.835840] usb 2-2: Manufacturer: Cisco-Linksys Mar 20 00:17:19 C-5 kernel: [ 561.835840] usb 2-2: SerialNumber: 1111 Mar 20 00:17:36 C-5 kernel: [ 582.117954] ndiswrapper version 1.53 loaded (smp=yes, preempt=no) Mar 20 00:17:36 C-5 kernel: [ 582.258876] usb 2-2: reset full speed USB device using uhci_hcd and address 4 Mar 20 00:17:37 C-5 kernel: [ 582.480958] ndiswrapper: driver wusb54gs (Linksys,06/18/2004, 3.60.9.0) loaded Mar 20 00:17:37 C-5 kernel: [ 582.882532] wlan0: ethernet device XX:XX:XX:XX:XX:XX using NDIS driver: wusb54gs, version: 0x33c0d03, NDIS version: 0x501, vendor: 'Linksys Wireless-G USB Network Adapter with SpeedBooster', 13B1:000E.F.conf Mar 20 00:17:37 C-5 kernel: [ 582.952748] wlan0: encryption modes supported: WEP; TKIP with WPA; AES/CCMP with WPA Mar 20 00:17:37 C-5 kernel: [ 582.954751] usbcore: registered new interface driver ndiswrapper with 2.6.28: Mar 19 23:56:39 C-5 kernel: [ 78.760014] usb 2-2: new full speed USB device using uhci_hcd and address 3 Mar 19 23:56:39 C-5 kernel: [ 78.935817] usb 2-2: configuration #1 chosen from 1 choice Mar 19 23:56:39 C-5 kernel: [ 79.056024] usb 2-2: reset full speed USB device using uhci_hcd and address 3 Mar 19 23:56:39 C-5 kernel: [ 79.232075] ndiswrapper: driver wusb54gs (Linksys,06/18/2004, 3.60.9.0) loaded Mar 19 23:56:39 C-5 kernel: [ 79.232267] ndiswrapper (mp_init:210): assuming WDM (non-NDIS) driver Mar 19 23:56:39 C-5 kernel: [ 79.232581] usb 2-2: New USB device found, idVendor=13b1, idProduct=000e Mar 19 23:56:39 C-5 kernel: [ 79.232586] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Mar 19 23:56:39 C-5 kernel: [ 79.232591] usb 2-2: Product: Linksys Wireless-G USB Network Adapter with SpeedBooster Mar 19 23:56:39 C-5 kernel: [ 79.232595] usb 2-2: Manufacturer: Cisco-Linksys Mar 19 23:56:39 C-5 kernel: [ 79.232598] usb 2-2: SerialNumber: 1111 Regards, Luís Picciochi -- System Information: Debian Release: squeeze/sid APT prefers testing APT policy: (500, 'testing') Architecture: i386 (i686) Kernel: Linux 2.6.26-1-686 (SMP w/2 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages ndiswrapper-source depends on: ii bzip2 1.0.5-1 high-quality block-sorting file co ii debhelper 7.0.17 helper programs for debian/rules ii module-assistant 0.10.11.0 tool to make module package creati ndiswrapper-source recommends no packages. Versions of packages ndiswrapper-source suggests: ii kernel-package 11.017 A utility for building Linux kerne -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
