Package: xen-tools Version: 3.9-4 Severity: important
Hi! First of all, I think that this is not he right place to report this bug, but I honestly don't know where it fits. So, my apologies if it is not. The thing is that I have installed the xen-linux-system-2.6.26-1-xen-amd64 and your tools xen-tools, and tried to follow the steps that successfully led me to a nice Xen installation in Debian Etch. I edited the file /etc/xen-tools/xen-tools.conf and left these values: dir = /home/xen install-method = debootstrap size = 30Gb memory = 1024Mb swap = 2048Mb fs = ext3 dist = lenny image = sparse gateway = 10.0.1.1 netmask = 255.255.0.0 broadcast = 10.0.255.255 passwd = 1 kernel = /boot/vmlinuz-`uname -r` initrd = /boot/initrd.img-`uname -r` arch = amd64 mirror = http://ftp.es.debian.org/debian/ xfs_options = defaults serial_device = hvc0 disk_device = xvda I also edited the file /etc/xen/xend-config.sxp and changed the dummy network script into the bridge one: (network-script network-bridge) # (network-script network-dummy) So I created the home directory and then the image using the command: mkdir /home/xen xen-create-image --hostname=xen01 --ip=10.0.33.254 It asked for the password and ended fine. Then I tried to create the virtual machine and connect to it with: xm create xen01.cfg -c And it displayed just the initial kernel messages, but no services output or prompt. So I destroyed the virtual machine and investigated the problem. It turned out that I had to add this directive to /etc/xen/xen01.cfg: extra='console=hvc' This is according to a bug to this package which is currently closed, specifically number #423389. I tried to create the VM again and this time it stopped at the cron service, giving me no prompt at the end. SSH sessions did return the "it's not a tty" and rendered unuseful. Here you are the output of the xm create xen01.cfg -c command: ------------------------------------------------------------------------------------ kasumi:~# xm create xen01.cfg -c Using config file "/etc/xen/xen01.cfg". Started domain xen01 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.26-1-xen-amd64 (Debian 2.6.26-8) ([EMAIL PROTECTED]) (gcc version 4.1.3 20080623 (prerelease) (Debian 4.1.2-23)) #1 SMP Thu Oct 9 17:11:22 UTC 2008 [ 0.000000] Command line: root=/dev/sda2 ro console=hvc [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: 0000000000000000 - 0000000010800000 (usable) [ 0.000000] max_pfn_mapped = 67584 [ 0.000000] init_memory_mapping [ 0.000000] early res: 0 [200000-631917] TEXT DATA BSS [ 0.000000] early res: 1 [632000-18eafff] Xen provided [ 0.000000] early res: 2 [18eb000-1971fff] PGTABLE [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] DMA32 4096 -> 1048576 [ 0.000000] Normal 1048576 -> 1048576 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 67584 [ 0.000000] PERCPU: Allocating 22192 bytes of per cpu data [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 66660 [ 0.000000] Kernel command line: root=/dev/sda2 ro console=hvc [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 2048 (order: 11, 16384 bytes) [ 0.000000] Xen reported: 2399.998 MHz processor. [ 0.004000] Console: colour dummy device 80x25 [ 0.004000] console [xvc-1] enabled [ 0.004000] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.004000] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.004000] Software IO TLB disabled [ 0.004000] Memory: 233200k/270336k available (2277k kernel code, 28588k reserved, 1021k data, 216k init) [ 0.968074] Calibrating delay using timer specific routine.. 4805.24 BogoMIPS (lpj=9610499) [ 0.968106] Security Framework initialized [ 0.968113] SELinux: Disabled at boot. [ 0.968117] Capability LSM initialized [ 0.968130] Mount-cache hash table entries: 256 [ 0.968245] Initializing cgroup subsys ns [ 0.968250] Initializing cgroup subsys cpuacct [ 0.968253] Initializing cgroup subsys devices [ 0.968277] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.968280] CPU: L2 cache: 4096K [ 0.968285] CPU: Physical Processor ID: 0 [ 0.968287] CPU: Processor Core ID: 1 [ 0.968295] SMP alternatives: switching to UP code [ 0.974083] Freeing SMP alternatives: 21k freed [ 0.974172] Brought up 1 CPUs [ 0.976028] net_namespace: 1224 bytes [ 0.976167] NET: Registered protocol family 16 [ 0.977021] Brought up 1 CPUs [ 0.977031] PCI: Fatal: No config space access function found [ 0.977034] PCI: setting up Xen PCI frontend stub [ 0.977572] ACPI: Interpreter disabled. [ 0.977577] Linux Plug and Play Support v0.97 (c) Adam Belay [ 0.977602] pnp: PnP ACPI: disabled [ 0.977796] suspend: event channel 7 [ 0.978126] xen_mem: Initialising balloon driver. [ 0.979142] usbcore: registered new interface driver usbfs [ 0.979191] usbcore: registered new interface driver hub [ 0.979225] usbcore: registered new device driver usb [ 0.979351] PCI: System does not support PCI [ 0.979354] PCI: System does not support PCI [ 0.992590] NET: Registered protocol family 2 [ 1.028122] IP route cache hash table entries: 4096 (order: 3, 32768 bytes) [ 1.028314] TCP established hash table entries: 16384 (order: 6, 262144 bytes) [ 1.028406] TCP bind hash table entries: 16384 (order: 6, 262144 bytes) [ 1.028496] TCP: Hash tables configured (established 16384 bind 16384) [ 1.028499] TCP reno registered [ 1.040123] NET: Registered protocol family 1 [ 1.040215] checking if image is initramfs... it is [ 1.053710] Freeing initrd memory: 18580k freed [ 1.060020] audit: initializing netlink socket (disabled) [ 1.060038] type=2000 audit(1224455386.096:1): initialized [ 1.060172] VFS: Disk quotas dquot_6.5.1 [ 1.060192] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.060210] msgmni has been set to 548 [ 1.060278] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 1.060282] io scheduler noop registered [ 1.060284] io scheduler anticipatory registered [ 1.060286] io scheduler deadline registered [ 1.060292] io scheduler cfq registered (default) [ 1.062014] Linux agpgart interface v0.103 [ 1.062046] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 1.063128] brd: module loaded [ 1.063178] input: Macintosh mouse button emulation as /class/input/input0 [ 1.063227] Xen virtual console successfully installed as xvc0 [ 1.063263] Event-channel device installed. [ 1.068741] netfront: Initialising virtual ethernet driver. [ 1.069724] PNP: No PS/2 controller found. Probing ports directly. [ 1.070546] i8042.c: No controller found. [ 1.075551] xen-vbd: registered block device major 8 [ 1.075564] blkfront: sda1: barriers enabled [ 1.076259] mice: PS/2 mouse device common for all mice [ 1.076351] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0 [ 1.076447] No iBFT detected. [ 1.076740] TCP cubic registered [ 1.076743] NET: Registered protocol family 17 [ 1.076824] registered taskstats version 1 [ 1.078318] blkfront: sda2: barriers enabled [ 1.176216] XENBUS: Device with no driver: device/console/0 [ 1.176224] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.176235] Freeing unused kernel memory: 216k freed Loading, please wait... Begin: Loading essential drivers ... done. Begin: Running /scripts/init-premount ... FATAL: Error inserting fan (/lib/modules/2.6.26-1-xen-amd64/kernel/drivers/acpi/fan.ko): No such device WARNING: Error inserting processor (/lib/modules/2.6.26-1-xen-amd64/kernel/drivers/acpi/processor.ko): No such device [ 1.284712] thermal: Unknown symbol acpi_processor_set_thermal_limit FATAL: Error inserting thermal (/lib/modules/2.6.26-1-xen-amd64/kernel/drivers/acpi/thermal.ko): Unknown symbol in module, or unknown parameter (see dmesg) done. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Begin: Running /scripts/local-premount ... done. [ 1.534910] kjournald starting. Commit interval 5 seconds [ 1.534920] EXT3-fs: mounted filesystem with ordered data mode. Begin: Running /scripts/local-bottom ... done. done. Begin: Running /scripts/init-bottom ... done. INIT: version 2.86 booting Mount point '/dev/shm' does not exist. Skipping mount. (warning). Setting the system clock. Cannot access the Hardware Clock via any known method. Use the --debug option to see the details of our search for an access method. Unable to set System Clock to: Sun Oct 19 22:29:46 UTC 2008 (warning). Activating swap...[ 1.733427] Adding 524280k swap on /dev/sda1. Priority:-1 extents:1 across:524280k done. Checking root file system...fsck 1.41.2 (02-Oct-2008) /dev/sda2: clean, 12106/262144 files, 124622/1048576 blocks done. [ 1.751140] EXT3 FS on sda2, internal journal Setting the system clock. Cannot access the Hardware Clock via any known method. Use the --debug option to see the details of our search for an access method. Unable to set System Clock to: Sun Oct 19 22:29:46 UTC 2008 (warning). Cleaning up ifupdown.... Loading kernel modules...done. Checking file systems...fsck 1.41.2 (02-Oct-2008) done. Setting kernel variables (/etc/sysctl.conf)...done. Mounting local filesystems...done. Activating swapfile swap...done. Setting up networking.... Configuring network interfaces...[ 2.101642] NET: Registered protocol family 10 [ 2.101915] lo: Disabled Privacy Extensions done. INIT: Entering runlevel: 2 Starting enhanced syslogd: rsyslogd. Starting OpenBSD Secure Shell server: sshd. Starting periodic command scheduler: crond. ------------------------------------------------------------------------------------ And here you are the output of a SSH login attempt: stdin: is not a tty Now, as I said, I am not sure whether this is an problem of the xen-tools package (apart from the extra directive in /etc/xen/xen01.cfg) or something else. I did not find any "hvc" in /etc/inittab, and I could not find a way to add any line related to that to that file in Google (in case that any has to). My technical knowledge is definitely not good enough to find a way out of this, so I hope you can help out, perhaps just redirecting the bug to the appropriate package. Thanks in advance and keep up the good work. -- System Information: Debian Release: lenny/sid APT prefers testing APT policy: (500, 'testing') Architecture: amd64 (x86_64) Kernel: Linux 2.6.26-1-xen-amd64 (SMP w/2 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages xen-tools depends on: ii debootstrap 1.0.10 Bootstrap a basic Debian system ii libconfig-inifiles-perl 2.39-5 Read .ini-style configuration file ii libtext-template-perl 1.44-1.2 Text::Template perl module ii perl-modules 5.10.0-15 Core Perl modules Versions of packages xen-tools recommends: ii libexpect-perl 1.20-1 Expect.pm - Perl Expect interface ii reiserfsprogs 1:3.6.19-6 User-level tools for ReiserFS file ii rinse 1.3-2 RPM installation environment ii xen-hypervisor-3.2-1-amd64 [x 3.2.1-2 The Xen Hypervisor on AMD64 ii xen-shell 1.8-3 Console based Xen administration u ii xfsprogs 2.9.8-1 Utilities for managing the XFS fil xen-tools suggests no packages. -- no debconf information >From MAILER-DAEMON Sun Oct 19 22:34:24 2008 Return-Path: <> X-Original-To: [EMAIL PROTECTED] Delivered-To: [EMAIL PROTECTED] Received: by kasumi.linuxsilo.net (Postfix) id 860058702A1; Sun, 19 Oct 2008 22:34:24 +0200 (CEST) Date: Sun, 19 Oct 2008 22:34:24 +0200 (CEST) From: [EMAIL PROTECTED] (Mail Delivery System) Subject: Undelivered Mail Returned to Sender To: [EMAIL PROTECTED] Auto-Submitted: auto-replied MIME-Version: 1.0 Content-Type: multipart/report; report-type=delivery-status; boundary="A0BF787029D.1224448464/kasumi.linuxsilo.net" Message-Id: <[EMAIL PROTECTED]> This is a MIME-encapsulated message. --A0BF787029D.1224448464/kasumi.linuxsilo.net Content-Description: Notification Content-Type: text/plain; charset=us-ascii This is the mail system at host kasumi.linuxsilo.net. I'm sorry to have to inform you that your message could not be delivered to one or more recipients. It's attached below. For further assistance, please send mail to postmaster. If you do so, please include this problem report. You can delete your own text from the attached returned message. The mail system <[EMAIL PROTECTED]>: host bugs.debian.org[140.211.166.43] said: 550-Verification failed for <[EMAIL PROTECTED]> 550-Unrouteable address 550 Sender verify failed (in reply to RCPT TO command) --A0BF787029D.1224448464/kasumi.linuxsilo.net Content-Description: Delivery report Content-Type: message/delivery-status Reporting-MTA: dns; kasumi.linuxsilo.net X-Postfix-Queue-ID: A0BF787029D X-Postfix-Sender: rfc822; [EMAIL PROTECTED] Arrival-Date: Sun, 19 Oct 2008 22:34:17 +0200 (CEST) Final-Recipient: rfc822; [EMAIL PROTECTED] Action: failed Status: 5.0.0 Remote-MTA: dns; bugs.debian.org Diagnostic-Code: smtp; 550-Verification failed for <[EMAIL PROTECTED]> 550-Unrouteable address 550 Sender verify failed --A0BF787029D.1224448464/kasumi.linuxsilo.net Content-Description: Undelivered Message Content-Type: message/rfc822 Received: by kasumi.linuxsilo.net (Postfix, from userid 0) id A0BF787029D; Sun, 19 Oct 2008 22:34:17 +0200 (CEST) Content-Type: text/plain; charset="us-ascii" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit From: root <[EMAIL PROTECTED]> To: Debian Bug Tracking System <[EMAIL PROTECTED]> Subject: Cannot connect console to VM created with xen-tools Message-ID: <[EMAIL PROTECTED]> X-Mailer: reportbug 3.45 Date: Sun, 19 Oct 2008 22:34:17 +0200 Package: xen-tools Version: 3.9-4 Severity: important (sorry for the dupplicate, forgot to put my real email address in the previous one) Hi! First of all, I think that this is not he right place to report this bug, but I honestly don't know where it fits. So, my apologies if it is not. The thing is that I have installed the xen-linux-system-2.6.26-1-xen-amd64 and your tools xen-tools, and tried to follow the steps that successfully led me to a nice Xen installation in Debian Etch. I edited the file /etc/xen-tools/xen-tools.conf and left these values: dir = /home/xen install-method = debootstrap size = 30Gb memory = 1024Mb swap = 2048Mb fs = ext3 dist = lenny image = sparse gateway = 10.0.1.1 netmask = 255.255.0.0 broadcast = 10.0.255.255 passwd = 1 kernel = /boot/vmlinuz-`uname -r` initrd = /boot/initrd.img-`uname -r` arch = amd64 mirror = http://ftp.es.debian.org/debian/ xfs_options = defaults serial_device = hvc0 disk_device = xvda I also edited the file /etc/xen/xend-config.sxp and changed the dummy network script into the bridge one: (network-script network-bridge) # (network-script network-dummy) So I created the home directory and then the image using the command: mkdir /home/xen xen-create-image --hostname=xen01 --ip=10.0.33.254 It asked for the password and ended fine. Then I tried to create the virtual machine and connect to it with: xm create xen01.cfg -c And it displayed just the initial kernel messages, but no services output or prompt. So I destroyed the virtual machine and investigated the problem. It turned out that I had to add this directive to /etc/xen/xen01.cfg: extra='console=hvc' This is according to a bug to this package which is currently closed, specifically number #423389. I tried to create the VM again and this time it stopped at the cron service, giving me no prompt at the end. SSH sessions did return the "it's not a tty" and rendered unuseful. Here you are the output of the xm create xen01.cfg -c command: ------------------------------------------------------------------------------------ kasumi:~# xm create xen01.cfg -c Using config file "/etc/xen/xen01.cfg". Started domain xen01 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.26-1-xen-amd64 (Debian 2.6.26-8) ([EMAIL PROTECTED]) (gcc version 4.1.3 20080623 (prerelease) (Debian 4.1.2-23)) #1 SMP Thu Oct 9 17:11:22 UTC 2008 [ 0.000000] Command line: root=/dev/sda2 ro console=hvc [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: 0000000000000000 - 0000000010800000 (usable) [ 0.000000] max_pfn_mapped = 67584 [ 0.000000] init_memory_mapping [ 0.000000] early res: 0 [200000-631917] TEXT DATA BSS [ 0.000000] early res: 1 [632000-18eafff] Xen provided [ 0.000000] early res: 2 [18eb000-1971fff] PGTABLE [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] DMA32 4096 -> 1048576 [ 0.000000] Normal 1048576 -> 1048576 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 67584 [ 0.000000] PERCPU: Allocating 22192 bytes of per cpu data [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 66660 [ 0.000000] Kernel command line: root=/dev/sda2 ro console=hvc [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 2048 (order: 11, 16384 bytes) [ 0.000000] Xen reported: 2399.998 MHz processor. [ 0.004000] Console: colour dummy device 80x25 [ 0.004000] console [xvc-1] enabled [ 0.004000] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.004000] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.004000] Software IO TLB disabled [ 0.004000] Memory: 233200k/270336k available (2277k kernel code, 28588k reserved, 1021k data, 216k init) [ 0.968074] Calibrating delay using timer specific routine.. 4805.24 BogoMIPS (lpj=9610499) [ 0.968106] Security Framework initialized [ 0.968113] SELinux: Disabled at boot. [ 0.968117] Capability LSM initialized [ 0.968130] Mount-cache hash table entries: 256 [ 0.968245] Initializing cgroup subsys ns [ 0.968250] Initializing cgroup subsys cpuacct [ 0.968253] Initializing cgroup subsys devices [ 0.968277] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.968280] CPU: L2 cache: 4096K [ 0.968285] CPU: Physical Processor ID: 0 [ 0.968287] CPU: Processor Core ID: 1 [ 0.968295] SMP alternatives: switching to UP code [ 0.974083] Freeing SMP alternatives: 21k freed [ 0.974172] Brought up 1 CPUs [ 0.976028] net_namespace: 1224 bytes [ 0.976167] NET: Registered protocol family 16 [ 0.977021] Brought up 1 CPUs [ 0.977031] PCI: Fatal: No config space access function found [ 0.977034] PCI: setting up Xen PCI frontend stub [ 0.977572] ACPI: Interpreter disabled. [ 0.977577] Linux Plug and Play Support v0.97 (c) Adam Belay [ 0.977602] pnp: PnP ACPI: disabled [ 0.977796] suspend: event channel 7 [ 0.978126] xen_mem: Initialising balloon driver. [ 0.979142] usbcore: registered new interface driver usbfs [ 0.979191] usbcore: registered new interface driver hub [ 0.979225] usbcore: registered new device driver usb [ 0.979351] PCI: System does not support PCI [ 0.979354] PCI: System does not support PCI [ 0.992590] NET: Registered protocol family 2 [ 1.028122] IP route cache hash table entries: 4096 (order: 3, 32768 bytes) [ 1.028314] TCP established hash table entries: 16384 (order: 6, 262144 bytes) [ 1.028406] TCP bind hash table entries: 16384 (order: 6, 262144 bytes) [ 1.028496] TCP: Hash tables configured (established 16384 bind 16384) [ 1.028499] TCP reno registered [ 1.040123] NET: Registered protocol family 1 [ 1.040215] checking if image is initramfs... it is [ 1.053710] Freeing initrd memory: 18580k freed [ 1.060020] audit: initializing netlink socket (disabled) [ 1.060038] type=2000 audit(1224455386.096:1): initialized [ 1.060172] VFS: Disk quotas dquot_6.5.1 [ 1.060192] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.060210] msgmni has been set to 548 [ 1.060278] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 1.060282] io scheduler noop registered [ 1.060284] io scheduler anticipatory registered [ 1.060286] io scheduler deadline registered [ 1.060292] io scheduler cfq registered (default) [ 1.062014] Linux agpgart interface v0.103 [ 1.062046] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 1.063128] brd: module loaded [ 1.063178] input: Macintosh mouse button emulation as /class/input/input0 [ 1.063227] Xen virtual console successfully installed as xvc0 [ 1.063263] Event-channel device installed. [ 1.068741] netfront: Initialising virtual ethernet driver. [ 1.069724] PNP: No PS/2 controller found. Probing ports directly. [ 1.070546] i8042.c: No controller found. [ 1.075551] xen-vbd: registered block device major 8 [ 1.075564] blkfront: sda1: barriers enabled [ 1.076259] mice: PS/2 mouse device common for all mice [ 1.076351] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0 [ 1.076447] No iBFT detected. [ 1.076740] TCP cubic registered [ 1.076743] NET: Registered protocol family 17 [ 1.076824] registered taskstats version 1 [ 1.078318] blkfront: sda2: barriers enabled [ 1.176216] XENBUS: Device with no driver: device/console/0 [ 1.176224] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.176235] Freeing unused kernel memory: 216k freed Loading, please wait... Begin: Loading essential drivers ... done. Begin: Running /scripts/init-premount ... FATAL: Error inserting fan (/lib/modules/2.6.26-1-xen-amd64/kernel/drivers/acpi/fan.ko): No such device WARNING: Error inserting processor (/lib/modules/2.6.26-1-xen-amd64/kernel/drivers/acpi/processor.ko): No such device [ 1.284712] thermal: Unknown symbol acpi_processor_set_thermal_limit FATAL: Error inserting thermal (/lib/modules/2.6.26-1-xen-amd64/kernel/drivers/acpi/thermal.ko): Unknown symbol in module, or unknown parameter (see dmesg) done. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Begin: Running /scripts/local-premount ... done. [ 1.534910] kjournald starting. Commit interval 5 seconds [ 1.534920] EXT3-fs: mounted filesystem with ordered data mode. Begin: Running /scripts/local-bottom ... done. done. Begin: Running /scripts/init-bottom ... done. INIT: version 2.86 booting Mount point '/dev/shm' does not exist. Skipping mount. (warning). Setting the system clock. Cannot access the Hardware Clock via any known method. Use the --debug option to see the details of our search for an access method. Unable to set System Clock to: Sun Oct 19 22:29:46 UTC 2008 (warning). Activating swap...[ 1.733427] Adding 524280k swap on /dev/sda1. Priority:-1 extents:1 across:524280k done. Checking root file system...fsck 1.41.2 (02-Oct-2008) /dev/sda2: clean, 12106/262144 files, 124622/1048576 blocks done. [ 1.751140] EXT3 FS on sda2, internal journal Setting the system clock. Cannot access the Hardware Clock via any known method. Use the --debug option to see the details of our search for an access method. Unable to set System Clock to: Sun Oct 19 22:29:46 UTC 2008 (warning). Cleaning up ifupdown.... Loading kernel modules...done. Checking file systems...fsck 1.41.2 (02-Oct-2008) done. Setting kernel variables (/etc/sysctl.conf)...done. Mounting local filesystems...done. Activating swapfile swap...done. Setting up networking.... Configuring network interfaces...[ 2.101642] NET: Registered protocol family 10 [ 2.101915] lo: Disabled Privacy Extensions done. INIT: Entering runlevel: 2 Starting enhanced syslogd: rsyslogd. Starting OpenBSD Secure Shell server: sshd. Starting periodic command scheduler: crond. ------------------------------------------------------------------------------------ And here you are the output of a SSH login attempt: stdin: is not a tty Now, as I said, I am not sure whether this is an problem of the xen-tools package (apart from the extra directive in /etc/xen/xen01.cfg) or something else. I did not find any "hvc" in /etc/inittab, and I could not find a way to add any line related to that to that file in Google (in case that any has to). My technical knowledge is definitely not good enough to find a way out of this, so I hope you can help out, perhaps just redirecting the bug to the appropriate package. Thanks in advance and keep up the good work. -- System Information: Debian Release: lenny/sid APT prefers testing APT policy: (500, 'testing') Architecture: amd64 (x86_64) Kernel: Linux 2.6.26-1-xen-amd64 (SMP w/2 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages xen-tools depends on: ii debootstrap 1.0.10 Bootstrap a basic Debian system ii libconfig-inifiles-perl 2.39-5 Read .ini-style configuration file ii libtext-template-perl 1.44-1.2 Text::Template perl module ii perl-modules 5.10.0-15 Core Perl modules Versions of packages xen-tools recommends: ii libexpect-perl 1.20-1 Expect.pm - Perl Expect interface ii reiserfsprogs 1:3.6.19-6 User-level tools for ReiserFS file ii rinse 1.3-2 RPM installation environment ii xen-hypervisor-3.2-1-amd64 [x 3.2.1-2 The Xen Hypervisor on AMD64 ii xen-shell 1.8-3 Console based Xen administration u ii xfsprogs 2.9.8-1 Utilities for managing the XFS fil xen-tools suggests no packages. -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
