Package: hplip Version: 2.8.6.b-1 Severity: normal Tags: patch
hal-cups-utils uses hp-makeuri, but is broken due to the fact that the -c option is broken (see bug #496660 [1]). According to the changelog this problem is already fixed, yet the relevant debian patch is not applied during build ( debian/patches/hp-makeuri-uri-only-output.dpatch ). I've attached a patch against debian/patches/00list that fixes this. Cheers, Avi. [1] http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=496660 -- Package-specific info: error: SIP not installed or version not found. note: For troubleshooting printing issues, it is best to have the CUPS 'LogLevel' note: set to 'debug'. To set the LogLevel to debug, edit the file /etc/cups/cupsd.conf (as root), note: and change the line near the top of the file that begins with 'LogLevel' to read: note: LogLevel debug note: Save the file and then restart CUPS (see your OS/distro docs on how to restart CUPS). note: Now, when you print, helpful debug information will be saved to the file: note: /var/log/cups/error_log note: You can monitor this file by running this command in a console/shell: note: tail -f /var/log/cups/error_log HP Linux Imaging and Printing System (ver. 2.8.6b) Dependency/Version Check Utility ver. 14.0 Copyright (c) 2001-8 Hewlett-Packard Development Company, LP This software comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to distribute it under certain conditions. See COPYING file for more details. Note: hp-check can be run in three modes: 1. Compile-time check mode (-c or --compile): Use this mode before compiling the HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies are installed to successfully compile HPLIP. 2. Run-time check mode (-r or --run): Use this mode to determine if a distro supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball has the proper dependencies installed to successfully run. 3. Both compile- and run-time check mode (-b or --both) (Default): This mode will check both of the above cases (both compile- and run-time dependencies). Saving output in log file: hp-check.log Initializing. Please wait... --------------- | SYSTEM INFO | --------------- Basic system information: Linux machine-cycle 2.6.26-1-686 #1 SMP Wed Sep 10 16:46:13 UTC 2008 i686 GNU/Linux Distribution: debian testing HPOJ running? No, HPOJ is not running (OK). Checking Python version... OK, version 2.5.2 installed Checking PyQt version... OK, version 3.17 installed. Checking SIP version... Checking for CUPS... Status: scheduler is running Version: 1.3.8 error_log is set to level: warn Checking for dbus/python-dbus... dbus daemon is running. python-dbus version: 0.82.4 ------------------------ | RUNTIME DEPENDENCIES | ------------------------ Checking for dependency: cups - Common Unix Printing System... OK, found. Checking for dependency: cups-ddk - CUPS driver development kit... OK, found. Checking for dependency: GhostScript - PostScript and PDF language interpreter and previewer... OK, found. Checking for dependency: PIL - Python Imaging Library (required for commandline scanning with hp-scan)... OK, found. Checking for dependency: ppdev - Parallel port support kernel module.... OK, found. Checking for dependency: PyQt - Qt interface for Python... OK, found. Checking for dependency: python-ctypes - A foreign function library for Python... OK, found. Checking for dependency: python-dbus - Python bindings for dbus... OK, found. Checking for dependency: Python 2.3 or greater - Required for fax functionality... OK, found. Checking for dependency: Reportlab - PDF library for Python... OK, found. Checking for dependency: SANE - Scanning library... OK, found. Checking for dependency: scanimage - Shell scanning program... OK, found. Checking for dependency: xsane - Graphical scanner frontend for SANE... OK, found. ---------------------- | HPLIP INSTALLATION | ---------------------- Currently installed HPLIP version... HPLIP 2.8.6b currently installed in '/usr/share/hplip'. Current contents of '/etc/hp/hplip.conf' file: # hplip.conf. Generated from hplip.conf.in by configure. [hplip] version=2.8.6b [dirs] home=/usr/share/hplip run=/var/run ppd=/usr/share/ppd/hpijs/HP ppdbase=/usr/share/ppd/hpijs doc=/usr/share/doc/hplip-doc/HTML icon=no cupsbackend=/usr/lib/cups/backend cupsfilter=/usr/lib/cups/filter drv=/usr/share/cups/drv # Following values are determined at configure time and cannot be changed. [configure] network-build=yes pp-build=yes gui-build=yes scanner-build=yes fax-build=yes dbus-build=yes cups11-build=no doc-build=yes shadow-build=no foomatic-drv-install=yes foomatic-ppd-install=no foomatic-rip-hplip-install=no internal-tag=2.8.6.20b ------------------------------- | DISCOVERED PARALLEL DEVICES | ------------------------------- No devices found. -------------------------- | DISCOVERED USB DEVICES | ----------------warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend to function in HPLIP. error: Unable to connect to dbus session bus. warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend to function in HPLIP. error: NOT FOUND OR FAILED TO LOAD! Please reinstall HPLIP and check for the proper installation of scanext. error: 4 errors and/or warnings. ---------- Device URI Model ------------------------------------------------- ---------------------------- hp:/usb/officejet_5500_series?serial=MY3C1D11KS96 HP officejet 5500 series --------------------------------- | INSTALLED CUPS PRINTER QUEUES | --------------------------------- Laser3 ------ Type: Unknown Installed in HPLIP?: No, not using the hp: or hpfax: CUPS backend. Device URI: http://localhost:40631/printers/laser3 PPD: /etc/cups/ppd/Laser3.ppd PPD Description: HP LaserJet 4050 Foomatic/hpijs - HPLIP 1.6.10 Printer status: printer Laser3 is idle. enabled since Sun 30 Sep 2007 11:07:17 AM IST officejet_5500 -------------- Type: Printer Installed in HPLIP?: Yes, using the hp: CUPS backend. Device URI: hp:/usb/officejet_5500_series?serial=MY3C1D11KS96 PPD: /etc/cups/ppd/officejet_5500.ppd PPD Description: HP Officejet 5500 series Foomatic/hpijs, hpijs 2.8.6b Printer status: printer officejet_5500 is idle. enabled since Thu 25 Sep 2008 09:44:10 AM IDT Communication status: Good officejet_5500_fax ------------------ Type: Fax Installed in HPLIP?: Yes, using the hpfax: CUPS backend. Device URI: hpfax:/usb/officejet_5500_series?serial=MY3C1D11KS96 PPD: /etc/cups/ppd/officejet_5500_fax.ppd PPD Description: HP Fax Printer status: printer officejet_5500_fax is idle. enabled since Thu 25 Sep 2008 09:43:55 AM IDT Communication status: Good PDF-Printer ----------- Type: Unknown Installed in HPLIP?: No, not using the hp: or hpfax: CUPS backend. Device URI: cups-pdf:/ PPD: /etc/cups/ppd/PDF-Printer.ppd PPD Description: Generic PostScript Printer Foomatic/Postscript (recommended) Printer status: printer PDF-Printer is idle. enabled since Sat 29 Sep 2007 09:47:55 PM IST ---------------------- | SANE CONFIGURATION | ---------------------- 'hpaio' in '/etc/sane.d/dll.conf'... OK, found. SANE backend 'hpaio' is properly set up. Checking output of 'scanimage -L'... device `hpaio:/usb/officejet_5500_series?serial=MY3C1D11KS96' is a Hewlett-Packard officejet_5500_series all-in-one --------------------- | PYTHON EXTENSIONS | --------------------- Checking 'cupsext' CUPS extension... OK, found. Checking 'pcardext' Photocard extension... OK, found. Checking 'hpmudext' I/O extension... OK, found. Checking 'scanext' SANE scanning extension... ----------------- | USB I/O SETUP | ----------------- Checking for permissions of USB attached printers... HP Device 0x3a11 at 001:005: Device URI: hp:/usb/officejet_5500_series?serial=MY3C1D11KS96 Device node: /dev/bus/usb/001/005 Mode: 0664 ----------- | SUMMARY | ----------- Please refer to the installation instructions at: http://hplip.sourceforge.net/install/index.html Done. -- System Information: Debian Release: lenny/sid APT prefers testing APT policy: (990, 'testing'), (500, 'unstable') Architecture: i386 (i686) Kernel: Linux 2.6.26-1-686 (SMP w/1 CPU core) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages hplip depends on: ii adduser 3.110 add and remove users and groups ii coreutils 6.10-6 The GNU core utilities ii cups 1.3.8-1lenny1 Common UNIX Printing System(tm) - ii hplip-data 2.8.6.b-1 HP Linux Printing and Imaging - da ii libc6 2.7-13 GNU C Library: Shared libraries ii libcups2 1.3.8-1lenny1 Common UNIX Printing System(tm) - ii libdbus-1-3 1.2.1-3 simple interprocess messaging syst ii libsnmp15 5.4.1~dfsg-8.1 SNMP (Simple Network Management Pr ii libssl0.9.8 0.9.8g-13 SSL shared libraries ii libusb-0.1-4 2:0.1.12-12 userspace USB programming library ii lsb-base 3.2-20 Linux Standard Base 3.2 init scrip ii python 2.5.2-2 An interactive high-level object-o ii python-dbus 0.82.4-2 simple interprocess messaging syst ii python-imaging 1.1.6-3 Python Imaging Library ii python-support 0.8.4 automated rebuilding support for P Versions of packages hplip recommends: ii cups-client 1.3.8-1lenny1 Common UNIX Printing System(tm) - ii hpijs 2.8.6.b-1 HP Linux Printing and Imaging - gs ii hplip-gui 2.8.6.b-1 HP Linux Printing and Imaging - GU Versions of packages hplip suggests: ii gksu 2.0.0-5 graphical frontend to su ii hplip-doc 2.8.6.b-1 HP Linux Printing and Imaging - do ii kdebase-bin 4:3.5.9.dfsg.1-5 core binaries for the KDE base mod pn kdeprint | gtklp | xpp <none> (no description available) ii openprinting-ppds 20080211-2+nmu1 OpenPrinting printer support - Pos -- no debconf information
--- 00list.original 2008-09-25 14:54:51.000000000 +0300 +++ 00list 2008-09-25 13:56:47.000000000 +0300 @@ -4,4 +4,5 @@ 61_noqt_message.dpatch 85_rebuild_python_ui.dpatch 87_move_documentation.dpatch +hp-makeuri-uri-only-output.dpatch hp_photosmart_pro_b9100_support.dpatch
