I did what you asked. The result is as below:
>gdb /usr/bin/scanimage GNU gdb 6.8-debian Copyright (C) 2008 Free Software Foundation, Inc. License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html> This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law. Type "show copying" and "show warranty" for details. This GDB was configured as "x86_64-linux-gnu"... (gdb) run Starting program: /usr/bin/scanimage [sanei_debug] Setting debug level of dll to 128. [dll] sane_init: SANE dll backend version 1.0.12 from sane-backends 1.0.19 [dll] sane_init/read_dlld: processing /etc/sane.d/dll.d ... [dll] sane_init/read_dlld: considering /etc/sane.d/dll.d/hpoj [dll] sane_init/read_config: reading dll.d/hpoj [dll] add_backend: adding backend `hpoj' [dll] sane_init/read_dlld: considering /etc/sane.d/dll.d/hplip [dll] sane_init/read_config: reading dll.d/hplip [dll] add_backend: adding backend `hpaio' [dll] sane_init/read_dlld: considering /etc/sane.d/dll.d/libsane-extras [dll] sane_init/read_config: reading dll.d/libsane-extras [dll] add_backend: adding backend `epkowa' [dll] add_backend: adding backend `hp_rts88xx' [dll] add_backend: adding backend `ls5000' [dll] sane_init/read_dlld: done. [dll] sane_init/read_config: reading dll.conf [dll] add_backend: adding backend `net' [dll] add_backend: adding backend `abaton' [dll] add_backend: adding backend `agfafocus' [dll] add_backend: adding backend `apple' [dll] add_backend: adding backend `avision' [dll] add_backend: adding backend `artec' [dll] add_backend: adding backend `artec_eplus48u' [dll] add_backend: adding backend `as6e' [dll] add_backend: adding backend `bh' [dll] add_backend: adding backend `canon' [dll] add_backend: adding backend `canon630u' [dll] add_backend: adding backend `cardscan' [dll] add_backend: adding backend `coolscan' [dll] add_backend: adding backend `coolscan2' [dll] add_backend: adding backend `dell1600n_net' [dll] add_backend: adding backend `dmc' [dll] add_backend: adding backend `epjitsu' [dll] add_backend: adding backend `epson' [dll] add_backend: adding backend `epson2' [dll] add_backend: adding backend `fujitsu' [dll] add_backend: adding backend `genesys' [dll] add_backend: adding backend `gt68xx' [dll] add_backend: adding backend `hp' [dll] add_backend: adding backend `hp3900' [dll] add_backend: adding backend `hpsj5s' [dll] add_backend: adding backend `hp3500' [dll] add_backend: adding backend `hp4200' [dll] add_backend: adding backend `hp5400' [dll] add_backend: adding backend `hp5590' [dll] add_backend: adding backend `hpljm1005' [dll] add_backend: adding backend `hs2p' [dll] add_backend: adding backend `ibm' [dll] add_backend: adding backend `leo' [dll] add_backend: adding backend `lexmark' [dll] add_backend: adding backend `ma1509' [dll] add_backend: adding backend `matsushita' [dll] add_backend: adding backend `microtek' [dll] add_backend: adding backend `microtek2' [dll] add_backend: adding backend `mustek' [dll] add_backend: adding backend `mustek_usb' [dll] add_backend: adding backend `mustek_usb2' [dll] add_backend: adding backend `nec' [dll] add_backend: adding backend `niash' [dll] add_backend: adding backend `pie' [dll] add_backend: adding backend `pixma' [dll] add_backend: adding backend `plustek' [dll] add_backend: adding backend `qcam' [dll] add_backend: adding backend `ricoh' [dll] add_backend: adding backend `s9036' [dll] add_backend: adding backend `sceptre' [dll] add_backend: adding backend `sharp' [dll] add_backend: adding backend `sm3600' [dll] add_backend: adding backend `sm3840' [dll] add_backend: adding backend `snapscan' [dll] add_backend: adding backend `sp15c' [dll] add_backend: adding backend `tamarack' [dll] add_backend: adding backend `teco1' [dll] add_backend: adding backend `teco2' [dll] add_backend: adding backend `teco3' [dll] add_backend: adding backend `u12' [dll] add_backend: adding backend `umax' [dll] add_backend: adding backend `umax1220u' [dll] add_backend: adding backend `v4l' [dll] sane_get_devices [dll] load: searching backend `v4l' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-v4l.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-v4l.so.1' [dll] init: initializing backend `v4l' [dll] init: backend `v4l' is version 1.0.4 [dll] load: searching backend `umax1220u' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-umax1220u.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-umax1220u.so.1' [dll] init: initializing backend `umax1220u' [dll] init: backend `umax1220u' is version 1.0.1 [dll] load: searching backend `umax' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-umax.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-umax.so.1' [dll] init: initializing backend `umax' [dll] init: backend `umax' is version 1.0.45 [dll] load: searching backend `u12' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-u12.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-u12.so.1' [dll] init: initializing backend `u12' [dll] init: backend `u12' is version 1.0.0 [dll] load: searching backend `teco3' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-teco3.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-teco3.so.1' [dll] init: initializing backend `teco3' [dll] init: backend `teco3' is version 1.0.1 [dll] load: searching backend `teco2' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-teco2.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-teco2.so.1' [dll] init: initializing backend `teco2' [dll] init: backend `teco2' is version 1.0.10 [dll] load: searching backend `teco1' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-teco1.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-teco1.so.1' [dll] init: initializing backend `teco1' [dll] init: backend `teco1' is version 1.0.10 [dll] load: searching backend `tamarack' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-tamarack.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-tamarack.so.1' [dll] init: initializing backend `tamarack' [dll] init: backend `tamarack' is version 1.0.0 [dll] load: searching backend `sp15c' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-sp15c.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-sp15c.so.1' [dll] init: initializing backend `sp15c' [dll] init: backend `sp15c' is version 1.0.0 [dll] load: searching backend `snapscan' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-snapscan.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-snapscan.so.1' [dll] init: initializing backend `snapscan' [dll] init: backend `snapscan' is version 1.4.53 [dll] load: searching backend `sm3840' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-sm3840.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-sm3840.so.1' [dll] init: initializing backend `sm3840' [dll] init: backend `sm3840' is version 1.0.0 [dll] load: searching backend `sm3600' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-sm3600.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-sm3600.so.1' [dll] init: initializing backend `sm3600' [dll] init: backend `sm3600' is version 1.0.6 [dll] load: searching backend `sharp' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-sharp.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-sharp.so.1' [dll] init: initializing backend `sharp' [dll] init: backend `sharp' is version 1.0.0 [dll] load: searching backend `sceptre' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-sceptre.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-sceptre.so.1' [dll] init: initializing backend `sceptre' [dll] init: backend `sceptre' is version 1.0.10 [dll] load: searching backend `s9036' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-s9036.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-s9036.so.1' [dll] init: initializing backend `s9036' [dll] init: backend `s9036' is version 1.0.0 [dll] load: searching backend `ricoh' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-ricoh.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-ricoh.so.1' [dll] init: initializing backend `ricoh' [dll] init: backend `ricoh' is version 1.0.0 [dll] load: searching backend `qcam' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-qcam.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-qcam.so.1' [dll] init: initializing backend `qcam' [dll] init: backend `qcam' is version 1.0.0 [dll] load: searching backend `plustek' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-plustek.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-plustek.so.1' [dll] init: initializing backend `plustek' [dll] init: backend `plustek' is version 1.0.0 [dll] load: searching backend `pixma' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-pixma.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-pixma.so.1' [dll] init: initializing backend `pixma' [dll] init: backend `pixma' is version 1.0.14 [dll] load: searching backend `pie' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-pie.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-pie.so.1' [dll] init: initializing backend `pie' [dll] init: backend `pie' is version 1.0.9 [dll] load: searching backend `niash' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-niash.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-niash.so.1' [dll] init: initializing backend `niash' [dll] init: backend `niash' is version 1.0.1 [dll] load: searching backend `nec' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-nec.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-nec.so.1' [dll] init: initializing backend `nec' [dll] init: backend `nec' is version 1.0.0 [dll] load: searching backend `mustek_usb2' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-mustek_usb2.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-mustek_usb2.so.1' [Thread debugging using libthread_db enabled] Error while reading shared library symbols: Cannot find new threads: generic error Cannot find new threads: generic error (gdb) c Continuing. [dll] init: initializing backend `mustek_usb2' [dll] init: backend `mustek_usb2' is version 1.0.10 [dll] load: searching backend `mustek_usb' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-mustek_usb.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-mustek_usb.so.1' [New Thread 0x2b1c8591adc0 (LWP 1071)] [dll] init: initializing backend `mustek_usb' [dll] init: backend `mustek_usb' is version 1.0.18 [dll] load: searching backend `mustek' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-mustek.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-mustek.so.1' [dll] init: initializing backend `mustek' [dll] init: backend `mustek' is version 1.0.138 [dll] load: searching backend `microtek2' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-microtek2.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-microtek2.so.1' [dll] init: initializing backend `microtek2' [dll] init: backend `microtek2' is version 1.0.0 [dll] load: searching backend `microtek' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-microtek.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-microtek.so.1' [dll] init: initializing backend `microtek' [dll] init: backend `microtek' is version 1.0.0 [dll] load: searching backend `matsushita' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-matsushita.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-matsushita.so.1' [dll] init: initializing backend `matsushita' [dll] init: backend `matsushita' is version 1.0.7 [dll] load: searching backend `ma1509' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-ma1509.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-ma1509.so.1' [dll] init: initializing backend `ma1509' [dll] init: backend `ma1509' is version 1.0.3 [dll] load: searching backend `lexmark' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-lexmark.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-lexmark.so.1' [dll] init: initializing backend `lexmark' [dll] init: backend `lexmark' is version 1.0.19 [dll] load: searching backend `leo' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-leo.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-leo.so.1' [dll] init: initializing backend `leo' [dll] init: backend `leo' is version 1.0.11 [dll] load: searching backend `ibm' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-ibm.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-ibm.so.1' [dll] init: initializing backend `ibm' [dll] init: backend `ibm' is version 1.0.0 [dll] load: searching backend `hs2p' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-hs2p.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-hs2p.so.1' [dll] init: initializing backend `hs2p' [dll] init: backend `hs2p' is version 1.0.0 [dll] load: searching backend `hpljm1005' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-hpljm1005.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-hpljm1005.so.1' [dll] init: initializing backend `hpljm1005' [dll] init: backend `hpljm1005' is version 1.0.0 [dll] load: searching backend `hp5590' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-hp5590.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-hp5590.so.1' [dll] init: initializing backend `hp5590' [dll] init: backend `hp5590' is version 1.0.2 [dll] load: searching backend `hp5400' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-hp5400.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-hp5400.so.1' [dll] init: initializing backend `hp5400' [dll] init: backend `hp5400' is version 1.0.3 [dll] load: searching backend `hp4200' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-hp4200.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-hp4200.so.1' [dll] init: initializing backend `hp4200' [dll] init: backend `hp4200' is version 1.0.0 [dll] load: searching backend `hp3500' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-hp3500.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-hp3500.so.1' [dll] init: initializing backend `hp3500' [dll] init: backend `hp3500' is version 1.0.0 [dll] load: searching backend `hpsj5s' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-hpsj5s.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-hpsj5s.so.1' [dll] init: initializing backend `hpsj5s' [dll] init: backend `hpsj5s' is version 1.0.3 [dll] load: searching backend `hp3900' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-hp3900.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-hp3900.so.1' [dll] init: initializing backend `hp3900' [dll] init: backend `hp3900' is version 1.0.0 [dll] load: searching backend `hp' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-hp.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-hp.so.1' [dll] init: initializing backend `hp' [dll] init: backend `hp' is version 1.0.8 [dll] load: searching backend `gt68xx' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-gt68xx.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-gt68xx.so.1' [dll] init: initializing backend `gt68xx' [dll] init: backend `gt68xx' is version 1.0.84 [dll] load: searching backend `genesys' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-genesys.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-genesys.so.1' [dll] init: initializing backend `genesys' [dll] init: backend `genesys' is version 1.0.9 [dll] load: searching backend `fujitsu' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-fujitsu.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-fujitsu.so.1' [dll] init: initializing backend `fujitsu' [dll] init: backend `fujitsu' is version 1.0.155 [dll] load: searching backend `epson2' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-epson2.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-epson2.so.1' [dll] init: initializing backend `epson2' [dll] init: backend `epson2' is version 1.0.116 [dll] load: searching backend `epson' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-epson.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-epson.so.1' [dll] init: initializing backend `epson' [dll] init: backend `epson' is version 1.0.247 [dll] load: searching backend `epjitsu' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-epjitsu.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-epjitsu.so.1' [dll] init: initializing backend `epjitsu' [dll] init: backend `epjitsu' is version 1.0.10 [dll] load: searching backend `dmc' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-dmc.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-dmc.so.1' [dll] init: initializing backend `dmc' [dll] init: backend `dmc' is version 1.0.0 [dll] load: searching backend `dell1600n_net' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-dell1600n_net.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-dell1600n_net.so.1' [dll] init: initializing backend `dell1600n_net' [dll] init: backend `dell1600n_net' is version 1.0.0 [dll] load: searching backend `coolscan2' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-coolscan2.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-coolscan2.so.1' [dll] init: initializing backend `coolscan2' [dll] init: backend `coolscan2' is version 1.0.0 [dll] load: searching backend `coolscan' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-coolscan.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-coolscan.so.1' [dll] init: initializing backend `coolscan' [dll] init: backend `coolscan' is version 1.0.0 [dll] load: searching backend `cardscan' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-cardscan.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-cardscan.so.1' [dll] init: initializing backend `cardscan' [dll] init: backend `cardscan' is version 1.0.0 [dll] load: searching backend `canon630u' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-canon630u.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-canon630u.so.1' [dll] init: initializing backend `canon630u' [dll] init: backend `canon630u' is version 1.0.1 [dll] load: searching backend `canon' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-canon.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-canon.so.1' [dll] init: initializing backend `canon' [dll] init: backend `canon' is version 1.0.0 [dll] load: searching backend `bh' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-bh.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-bh.so.1' [dll] init: initializing backend `bh' [dll] init: backend `bh' is version 1.0.4 [dll] load: searching backend `as6e' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-as6e.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-as6e.so.1' [dll] init: initializing backend `as6e' [dll] load: searching backend `artec_eplus48u' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-artec_eplus48u.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-artec_eplus48u.so.1' [dll] init: initializing backend `artec_eplus48u' [dll] init: backend `artec_eplus48u' is version 1.0.0 [dll] load: searching backend `artec' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-artec.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-artec.so.1' [dll] init: initializing backend `artec' [dll] init: backend `artec' is version 1.0.0 [dll] load: searching backend `avision' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-avision.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-avision.so.1' [dll] init: initializing backend `avision' [dll] init: backend `avision' is version 1.0.288 [dll] load: searching backend `apple' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-apple.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-apple.so.1' [dll] init: initializing backend `apple' [dll] init: backend `apple' is version 1.0.0 [dll] load: searching backend `agfafocus' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-agfafocus.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-agfafocus.so.1' [dll] init: initializing backend `agfafocus' [dll] init: backend `agfafocus' is version 1.0.0 [dll] load: searching backend `abaton' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-abaton.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-abaton.so.1' [dll] init: initializing backend `abaton' [dll] init: backend `abaton' is version 1.0.0 [dll] load: searching backend `net' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-net.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-net.so.1' [dll] init: initializing backend `net' [New Thread 0x40800950 (LWP 1075)] [dll] init: backend `net' is version 1.0.19 [dll] load: searching backend `ls5000' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-ls5000.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-ls5000.so.1' [dll] init: initializing backend `ls5000' [dll] init: backend `ls5000' is version 1.0.0 [dll] load: searching backend `hp_rts88xx' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-hp_rts88xx.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-hp_rts88xx.so.1' [dll] init: initializing backend `hp_rts88xx' [sanei_debug] Setting debug level of hp_rts88xx to 128. [hp_rts88xx] SANE HP_RTS88XX USB backend version 1.0 build 18 from sane-backends 1.0.19 [hp_rts88xx] Init_Interface: call Hp_rts_XferInit [hp_rts88xx] Hp_rts_XferInit .... [hp_rts88xx] Looking for UnknownModel...[hp_rts88xx] [hp_rts88xx] Looking for ScanJet 3500C...[hp_rts88xx] [hp_rts88xx] Looking for ScanJet 3530C...[hp_rts88xx] [hp_rts88xx] Looking for ScanJet 3570C...[hp_rts88xx] [hp_rts88xx] Looking for ScanJet 4400C...[hp_rts88xx] [hp_rts88xx] Looking for ScanJet 4470C...[hp_rts88xx] _AttachUsb: found libusb:004:004[hp_rts88xx] [hp_rts88xx] sane_init: call sanei_config_open [hp_rts88xx] sane_init: reading config file 'hp_rts88xx.conf' [dll] init: backend `hp_rts88xx' is version 1.0.18 [hp_rts88xx] sane_get_devices: name libusb:004:004 [dll] load: searching backend `epkowa' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-epkowa.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-epkowa.so.1' [dll] init: initializing backend `epkowa' [dll] init: backend `epkowa' is version 1.0.208 [dll] load: searching backend `hpaio' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-hpaio.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-hpaio.so.1' [dll] init: initializing backend `hpaio' [dll] init: backend `hpaio' is version 1.0.0 [dll] load: searching backend `hpoj' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-hpoj.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-hpoj.so.1' [dll] init: initializing backend `hpoj' [dll] init: backend `hpoj' is version 1.0.6 [dll] sane_get_devices: found 1 devices [dll] sane_open: trying to open `hp_rts88xx:libusb:004:004' [hp_rts88xx] sane_open: libusb:004:004 [hp_rts88xx] Hp_rts_XferOpen, trying to open libusb:004:004... [hp_rts88xx] Hp_rts_MatchUsbDevice :Matching USB device 0x03F0-0x0805 ... [hp_rts88xx] Hp_rts_MatchUsbDevice : found Hewlett-Packard ScanJet 4470C [hp_rts88xx] Init_Interface.... [hp_rts88xx] Hp_rts_ProbeRegisters: iHandle = 0, Probing scanner... [hp_rts88xx] Init_Interface: Use scanner (5) ScanJet 4470C [hp_rts88xx] Hp44x0_Wakeup.... [hp_rts88xx] Hp44x0_cal_scanner.... Program received signal SIGSEGV, Segmentation fault. [Switching to Thread 0x2b1c8591adc0 (LWP 1071)] Hp44x0_cal_scanner (pHWParams=0x0, pParams=0x69ca60) at hp_rts_44x0c.c:249 249 hp_rts_44x0c.c: No such file or directory. in hp_rts_44x0c.c (gdb) bt #0 Hp44x0_cal_scanner (pHWParams=0x0, pParams=0x69ca60) at hp_rts_44x0c.c:249 #1 0x00002aaaaacc76e9 in _Init_Interface (pHWParams=0x0, pParams=0x69ca60) at hp_rts88xx.c:304 #2 0x00002aaaaacc78be in sane_hp_rts88xx_open ( name=0x655c7b "libusb:004:004", h=<value optimized out>) at hp_rts88xx.c:869 #3 0x00002b1c851bf9b5 in sane_dll_open ( full_name=0x655c70 "hp_rts88xx:libusb:004:004", meta_handle=0x609e20) at dll.c:1179 #4 0x0000000000403a7c in main (argc=1, argv=0x7fff25b09278) at scanimage.c:1913 (gdb) ---------------------------------------------------- Wyślij buziaka na DZIEŃ CHŁOPAKA! http://klik.wp.pl/?adr=http%3A%2F%2Fcorto.www.wp.pl%2Fas%2Fdzienchlopaka.html&sid=501 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
