Package: sane-utils Version: 1.0.19-20 Severity: grave Justification: renders package unusable
The scanner is properly recognized: >scanimage -L device `hp_rts88xx:libusb:004:004' is a Hewlett-Packard ScanJet 4470C flatbed scanner However, invoking scanimage in scanning mode produces Segmentation fault: >scanimage [sanei_debug] Setting debug level of dll to 128. [dll] sane_init: SANE dll backend version 1.0.12 from sane-backends 1.0.19 [dll] sane_init/read_dlld: processing /etc/sane.d/dll.d ... [dll] sane_init/read_dlld: considering /etc/sane.d/dll.d/hpoj [dll] sane_init/read_config: reading dll.d/hpoj [dll] add_backend: adding backend `hpoj' [dll] sane_init/read_dlld: considering /etc/sane.d/dll.d/hplip [dll] sane_init/read_config: reading dll.d/hplip [dll] add_backend: adding backend `hpaio' [dll] sane_init/read_dlld: considering /etc/sane.d/dll.d/libsane-extras [dll] sane_init/read_config: reading dll.d/libsane-extras [dll] add_backend: adding backend `epkowa' [dll] add_backend: adding backend `hp_rts88xx' [dll] add_backend: adding backend `ls5000' [dll] sane_init/read_dlld: done. [dll] sane_init/read_config: reading dll.conf [dll] add_backend: adding backend `net' [dll] add_backend: adding backend `abaton' [dll] add_backend: adding backend `agfafocus' [dll] add_backend: adding backend `apple' [dll] add_backend: adding backend `avision' [dll] add_backend: adding backend `artec' [dll] add_backend: adding backend `artec_eplus48u' [dll] add_backend: adding backend `as6e' [dll] add_backend: adding backend `bh' [dll] add_backend: adding backend `canon' [dll] add_backend: adding backend `canon630u' [dll] add_backend: adding backend `cardscan' [dll] add_backend: adding backend `coolscan' [dll] add_backend: adding backend `coolscan2' [dll] add_backend: adding backend `dell1600n_net' [dll] add_backend: adding backend `dmc' [dll] add_backend: adding backend `epjitsu' [dll] add_backend: adding backend `epson' [dll] add_backend: adding backend `epson2' [dll] add_backend: adding backend `fujitsu' [dll] add_backend: adding backend `genesys' [dll] add_backend: adding backend `gt68xx' [dll] add_backend: adding backend `hp' [dll] add_backend: adding backend `hp3900' [dll] add_backend: adding backend `hpsj5s' [dll] add_backend: adding backend `hp3500' [dll] add_backend: adding backend `hp4200' [dll] add_backend: adding backend `hp5400' [dll] add_backend: adding backend `hp5590' [dll] add_backend: adding backend `hpljm1005' [dll] add_backend: adding backend `hs2p' [dll] add_backend: adding backend `ibm' [dll] add_backend: adding backend `leo' [dll] add_backend: adding backend `lexmark' [dll] add_backend: adding backend `ma1509' [dll] add_backend: adding backend `matsushita' [dll] add_backend: adding backend `microtek' [dll] add_backend: adding backend `microtek2' [dll] add_backend: adding backend `mustek' [dll] add_backend: adding backend `mustek_usb' [dll] add_backend: adding backend `mustek_usb2' [dll] add_backend: adding backend `nec' [dll] add_backend: adding backend `niash' [dll] add_backend: adding backend `pie' [dll] add_backend: adding backend `pixma' [dll] add_backend: adding backend `plustek' [dll] add_backend: adding backend `qcam' [dll] add_backend: adding backend `ricoh' [dll] add_backend: adding backend `s9036' [dll] add_backend: adding backend `sceptre' [dll] add_backend: adding backend `sharp' [dll] add_backend: adding backend `sm3600' [dll] add_backend: adding backend `sm3840' [dll] add_backend: adding backend `snapscan' [dll] add_backend: adding backend `sp15c' [dll] add_backend: adding backend `tamarack' [dll] add_backend: adding backend `teco1' [dll] add_backend: adding backend `teco2' [dll] add_backend: adding backend `teco3' [dll] add_backend: adding backend `u12' [dll] add_backend: adding backend `umax' [dll] add_backend: adding backend `umax1220u' [dll] add_backend: adding backend `v4l' [dll] sane_get_devices [dll] load: searching backend `v4l' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-v4l.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-v4l.so.1' [dll] init: initializing backend `v4l' [dll] init: backend `v4l' is version 1.0.4 [dll] load: searching backend `umax1220u' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-umax1220u.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-umax1220u.so.1' [dll] init: initializing backend `umax1220u' [dll] init: backend `umax1220u' is version 1.0.1 [dll] load: searching backend `umax' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-umax.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-umax.so.1' [dll] init: initializing backend `umax' [dll] init: backend `umax' is version 1.0.45 [dll] load: searching backend `u12' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-u12.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-u12.so.1' [dll] init: initializing backend `u12' [dll] init: backend `u12' is version 1.0.0 [dll] load: searching backend `teco3' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-teco3.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-teco3.so.1' [dll] init: initializing backend `teco3' [dll] init: backend `teco3' is version 1.0.1 [dll] load: searching backend `teco2' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-teco2.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-teco2.so.1' [dll] init: initializing backend `teco2' [dll] init: backend `teco2' is version 1.0.10 [dll] load: searching backend `teco1' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-teco1.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-teco1.so.1' [dll] init: initializing backend `teco1' [dll] init: backend `teco1' is version 1.0.10 [dll] load: searching backend `tamarack' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-tamarack.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-tamarack.so.1' [dll] init: initializing backend `tamarack' [dll] init: backend `tamarack' is version 1.0.0 [dll] load: searching backend `sp15c' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-sp15c.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-sp15c.so.1' [dll] init: initializing backend `sp15c' [dll] init: backend `sp15c' is version 1.0.0 [dll] load: searching backend `snapscan' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-snapscan.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-snapscan.so.1' [dll] init: initializing backend `snapscan' [dll] init: backend `snapscan' is version 1.4.53 [dll] load: searching backend `sm3840' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-sm3840.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-sm3840.so.1' [dll] init: initializing backend `sm3840' [dll] init: backend `sm3840' is version 1.0.0 [dll] load: searching backend `sm3600' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-sm3600.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-sm3600.so.1' [dll] init: initializing backend `sm3600' [dll] init: backend `sm3600' is version 1.0.6 [dll] load: searching backend `sharp' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-sharp.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-sharp.so.1' [dll] init: initializing backend `sharp' [dll] init: backend `sharp' is version 1.0.0 [dll] load: searching backend `sceptre' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-sceptre.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-sceptre.so.1' [dll] init: initializing backend `sceptre' [dll] init: backend `sceptre' is version 1.0.10 [dll] load: searching backend `s9036' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-s9036.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-s9036.so.1' [dll] init: initializing backend `s9036' [dll] init: backend `s9036' is version 1.0.0 [dll] load: searching backend `ricoh' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-ricoh.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-ricoh.so.1' [dll] init: initializing backend `ricoh' [dll] init: backend `ricoh' is version 1.0.0 [dll] load: searching backend `qcam' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-qcam.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-qcam.so.1' [dll] init: initializing backend `qcam' [dll] init: backend `qcam' is version 1.0.0 [dll] load: searching backend `plustek' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-plustek.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-plustek.so.1' [dll] init: initializing backend `plustek' [dll] init: backend `plustek' is version 1.0.0 [dll] load: searching backend `pixma' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-pixma.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-pixma.so.1' [dll] init: initializing backend `pixma' [dll] init: backend `pixma' is version 1.0.14 [dll] load: searching backend `pie' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-pie.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-pie.so.1' [dll] init: initializing backend `pie' [dll] init: backend `pie' is version 1.0.9 [dll] load: searching backend `niash' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-niash.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-niash.so.1' [dll] init: initializing backend `niash' [dll] init: backend `niash' is version 1.0.1 [dll] load: searching backend `nec' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-nec.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-nec.so.1' [dll] init: initializing backend `nec' [dll] init: backend `nec' is version 1.0.0 [dll] load: searching backend `mustek_usb2' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-mustek_usb2.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-mustek_usb2.so.1' [dll] init: initializing backend `mustek_usb2' [dll] init: backend `mustek_usb2' is version 1.0.10 [dll] load: searching backend `mustek_usb' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-mustek_usb.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-mustek_usb.so.1' [dll] init: initializing backend `mustek_usb' [dll] init: backend `mustek_usb' is version 1.0.18 [dll] load: searching backend `mustek' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-mustek.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-mustek.so.1' [dll] init: initializing backend `mustek' [dll] init: backend `mustek' is version 1.0.138 [dll] load: searching backend `microtek2' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-microtek2.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-microtek2.so.1' [dll] init: initializing backend `microtek2' [dll] init: backend `microtek2' is version 1.0.0 [dll] load: searching backend `microtek' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-microtek.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-microtek.so.1' [dll] init: initializing backend `microtek' [dll] init: backend `microtek' is version 1.0.0 [dll] load: searching backend `matsushita' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-matsushita.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-matsushita.so.1' [dll] init: initializing backend `matsushita' [dll] init: backend `matsushita' is version 1.0.7 [dll] load: searching backend `ma1509' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-ma1509.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-ma1509.so.1' [dll] init: initializing backend `ma1509' [dll] init: backend `ma1509' is version 1.0.3 [dll] load: searching backend `lexmark' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-lexmark.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-lexmark.so.1' [dll] init: initializing backend `lexmark' [dll] init: backend `lexmark' is version 1.0.19 [dll] load: searching backend `leo' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-leo.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-leo.so.1' [dll] init: initializing backend `leo' [dll] init: backend `leo' is version 1.0.11 [dll] load: searching backend `ibm' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-ibm.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-ibm.so.1' [dll] init: initializing backend `ibm' [dll] init: backend `ibm' is version 1.0.0 [dll] load: searching backend `hs2p' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-hs2p.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-hs2p.so.1' [dll] init: initializing backend `hs2p' [dll] init: backend `hs2p' is version 1.0.0 [dll] load: searching backend `hpljm1005' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-hpljm1005.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-hpljm1005.so.1' [dll] init: initializing backend `hpljm1005' [dll] init: backend `hpljm1005' is version 1.0.0 [dll] load: searching backend `hp5590' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-hp5590.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-hp5590.so.1' [dll] init: initializing backend `hp5590' [dll] init: backend `hp5590' is version 1.0.2 [dll] load: searching backend `hp5400' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-hp5400.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-hp5400.so.1' [dll] init: initializing backend `hp5400' [dll] init: backend `hp5400' is version 1.0.3 [dll] load: searching backend `hp4200' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-hp4200.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-hp4200.so.1' [dll] init: initializing backend `hp4200' [dll] init: backend `hp4200' is version 1.0.0 [dll] load: searching backend `hp3500' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-hp3500.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-hp3500.so.1' [dll] init: initializing backend `hp3500' [dll] init: backend `hp3500' is version 1.0.0 [dll] load: searching backend `hpsj5s' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-hpsj5s.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-hpsj5s.so.1' [dll] init: initializing backend `hpsj5s' [dll] init: backend `hpsj5s' is version 1.0.3 [dll] load: searching backend `hp3900' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-hp3900.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-hp3900.so.1' [dll] init: initializing backend `hp3900' [dll] init: backend `hp3900' is version 1.0.0 [dll] load: searching backend `hp' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-hp.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-hp.so.1' [dll] init: initializing backend `hp' [dll] init: backend `hp' is version 1.0.8 [dll] load: searching backend `gt68xx' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-gt68xx.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-gt68xx.so.1' [dll] init: initializing backend `gt68xx' [dll] init: backend `gt68xx' is version 1.0.84 [dll] load: searching backend `genesys' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-genesys.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-genesys.so.1' [dll] init: initializing backend `genesys' [dll] init: backend `genesys' is version 1.0.9 [dll] load: searching backend `fujitsu' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-fujitsu.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-fujitsu.so.1' [dll] init: initializing backend `fujitsu' [dll] init: backend `fujitsu' is version 1.0.155 [dll] load: searching backend `epson2' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-epson2.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-epson2.so.1' [dll] init: initializing backend `epson2' [dll] init: backend `epson2' is version 1.0.116 [dll] load: searching backend `epson' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-epson.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-epson.so.1' [dll] init: initializing backend `epson' [dll] init: backend `epson' is version 1.0.247 [dll] load: searching backend `epjitsu' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-epjitsu.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-epjitsu.so.1' [dll] init: initializing backend `epjitsu' [dll] init: backend `epjitsu' is version 1.0.10 [dll] load: searching backend `dmc' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-dmc.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-dmc.so.1' [dll] init: initializing backend `dmc' [dll] init: backend `dmc' is version 1.0.0 [dll] load: searching backend `dell1600n_net' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-dell1600n_net.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-dell1600n_net.so.1' [dll] init: initializing backend `dell1600n_net' [dll] init: backend `dell1600n_net' is version 1.0.0 [dll] load: searching backend `coolscan2' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-coolscan2.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-coolscan2.so.1' [dll] init: initializing backend `coolscan2' [dll] init: backend `coolscan2' is version 1.0.0 [dll] load: searching backend `coolscan' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-coolscan.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-coolscan.so.1' [dll] init: initializing backend `coolscan' [dll] init: backend `coolscan' is version 1.0.0 [dll] load: searching backend `cardscan' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-cardscan.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-cardscan.so.1' [dll] init: initializing backend `cardscan' [dll] init: backend `cardscan' is version 1.0.0 [dll] load: searching backend `canon630u' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-canon630u.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-canon630u.so.1' [dll] init: initializing backend `canon630u' [dll] init: backend `canon630u' is version 1.0.1 [dll] load: searching backend `canon' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-canon.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-canon.so.1' [dll] init: initializing backend `canon' [dll] init: backend `canon' is version 1.0.0 [dll] load: searching backend `bh' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-bh.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-bh.so.1' [dll] init: initializing backend `bh' [dll] init: backend `bh' is version 1.0.4 [dll] load: searching backend `as6e' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-as6e.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-as6e.so.1' [dll] init: initializing backend `as6e' [dll] load: searching backend `artec_eplus48u' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-artec_eplus48u.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-artec_eplus48u.so.1' [dll] init: initializing backend `artec_eplus48u' [dll] init: backend `artec_eplus48u' is version 1.0.0 [dll] load: searching backend `artec' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-artec.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-artec.so.1' [dll] init: initializing backend `artec' [dll] init: backend `artec' is version 1.0.0 [dll] load: searching backend `avision' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-avision.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-avision.so.1' [dll] init: initializing backend `avision' [dll] init: backend `avision' is version 1.0.288 [dll] load: searching backend `apple' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-apple.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-apple.so.1' [dll] init: initializing backend `apple' [dll] init: backend `apple' is version 1.0.0 [dll] load: searching backend `agfafocus' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-agfafocus.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-agfafocus.so.1' [dll] init: initializing backend `agfafocus' [dll] init: backend `agfafocus' is version 1.0.0 [dll] load: searching backend `abaton' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-abaton.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-abaton.so.1' [dll] init: initializing backend `abaton' [dll] init: backend `abaton' is version 1.0.0 [dll] load: searching backend `net' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-net.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-net.so.1' [dll] init: initializing backend `net' [dll] init: backend `net' is version 1.0.19 [dll] load: searching backend `ls5000' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-ls5000.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-ls5000.so.1' [dll] init: initializing backend `ls5000' [dll] init: backend `ls5000' is version 1.0.0 [dll] load: searching backend `hp_rts88xx' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-hp_rts88xx.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-hp_rts88xx.so.1' [dll] init: initializing backend `hp_rts88xx' [sanei_debug] Setting debug level of hp_rts88xx to 128. [hp_rts88xx] SANE HP_RTS88XX USB backend version 1.0 build 18 from sane-backends 1.0.19 [hp_rts88xx] Init_Interface: call Hp_rts_XferInit [hp_rts88xx] Hp_rts_XferInit .... [hp_rts88xx] Looking for UnknownModel...[hp_rts88xx] [hp_rts88xx] Looking for ScanJet 3500C...[hp_rts88xx] [hp_rts88xx] Looking for ScanJet 3530C...[hp_rts88xx] [hp_rts88xx] Looking for ScanJet 3570C...[hp_rts88xx] [hp_rts88xx] Looking for ScanJet 4400C...[hp_rts88xx] [hp_rts88xx] Looking for ScanJet 4470C...[hp_rts88xx] _AttachUsb: found libusb:004:004[hp_rts88xx] [hp_rts88xx] sane_init: call sanei_config_open [hp_rts88xx] sane_init: reading config file 'hp_rts88xx.conf' [dll] init: backend `hp_rts88xx' is version 1.0.18 [hp_rts88xx] sane_get_devices: name libusb:004:004 [dll] load: searching backend `epkowa' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-epkowa.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-epkowa.so.1' [dll] init: initializing backend `epkowa' [dll] init: backend `epkowa' is version 1.0.208 [dll] load: searching backend `hpaio' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-hpaio.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-hpaio.so.1' [dll] init: initializing backend `hpaio' [dll] init: backend `hpaio' is version 1.0.0 [dll] load: searching backend `hpoj' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-hpoj.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-hpoj.so.1' [dll] init: initializing backend `hpoj' [dll] init: backend `hpoj' is version 1.0.6 [dll] sane_get_devices: found 1 devices [dll] sane_open: trying to open `hp_rts88xx:libusb:004:004' [hp_rts88xx] sane_open: libusb:004:004 [hp_rts88xx] Hp_rts_XferOpen, trying to open libusb:004:004... [hp_rts88xx] Hp_rts_MatchUsbDevice :Matching USB device 0x03F0-0x0805 ... [hp_rts88xx] Hp_rts_MatchUsbDevice : found Hewlett-Packard ScanJet 4470C [hp_rts88xx] Init_Interface.... [hp_rts88xx] Hp_rts_ProbeRegisters: iHandle = 0, Probing scanner... [hp_rts88xx] Init_Interface: Use scanner (5) ScanJet 4470C [hp_rts88xx] Hp44x0_Wakeup.... [hp_rts88xx] Hp44x0_cal_scanner.... Segmentation fault -- System Information: Debian Release: lenny/sid APT prefers testing APT policy: (500, 'testing') Architecture: amd64 (x86_64) Kernel: Linux 2.6.24+13-amd64 (SMP w/2 CPU cores) Locale: LANG=pl_PL, LC_CTYPE=pl_PL (charmap=ISO-8859-2) (ignored: LC_ALL set to pl_PL) Shell: /bin/sh linked to /bin/bash Versions of packages sane-utils depends on: ii adduser 3.110 add and remove users and groups ii debconf [debconf-2.0] 1.5.22 Debian configuration management sy ii libavahi-client3 0.6.22-3 Avahi client library ii libavahi-common3 0.6.22-3 Avahi common library ii libc6 2.7-13 GNU C Library: Shared libraries ii libieee1284-3 0.2.11-5 cross-platform library for paralle ii libsane 1.0.19-20 API library for scanners ii libusb-0.1-4 2:0.1.12-12 userspace USB programming library ii update-inetd 4.31 inetd configuration file updater Versions of packages sane-utils recommends: ii avahi-daemon 0.6.22-3 Avahi mDNS/DNS-SD daemon Versions of packages sane-utils suggests: ii unpaper 0.3-1 post-processing tool for scanned p -- debconf information: sane-utils/saned_run: false sane-utils/saned_scanner_group: true -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
