Package: lm-sensors
Version: 1:2.10.1-3
Severity: normal
File: /usr/bin/sensors
"
barbara:~# sensors
adm1021-i2c-0-4e
Adapter: SMBus PIIX4 adapter at 2180
Board Temp:
+55oC (low = -65oC, high = +127oC)
CPU Temp: +57oC (low = +55oC, high = +97oC) ALARM (HIGH)
ERROR: Can't get die-code data!
"
I would like to be able to run sensors without the error message.
Will attach an strace. Nag me if I forget.
Here's the directory it's trying to read from:
barbara:~# ls -Al /sys/devices/pci0000:00/0000:00:07.3/i2c-0/0-004e/
totalt 0
-r--r--r-- 1 root root 4096 2007-09-18 13:05 alarms
lrwxrwxrwx 1 root root 0 2007-09-18 13:05 bus -> ../../../../../bus/i2c
lrwxrwxrwx 1 root root 0 2007-09-18 13:05 driver ->
../../../../../bus/i2c/drivers/adm1021
lrwxrwxrwx 1 root root 0 2007-09-18 13:06 hwmon:hwmon0 ->
../../../../../class/hwmon/hwmon0
-r--r--r-- 1 root root 4096 2007-09-18 13:05 name
drwxr-xr-x 2 root root 0 2007-09-18 12:59 power
lrwxrwxrwx 1 root root 0 2007-09-18 13:05 subsystem -> ../../../../../bus/i2c
-r--r--r-- 1 root root 4096 2007-09-18 13:05 temp1_input
-rw-r--r-- 1 root root 4096 2007-09-18 13:05 temp1_max
-rw-r--r-- 1 root root 4096 2007-09-18 13:05 temp1_min
-r--r--r-- 1 root root 4096 2007-09-18 13:05 temp2_input
-rw-r--r-- 1 root root 4096 2007-09-18 13:05 temp2_max
-rw-r--r-- 1 root root 4096 2007-09-18 13:05 temp2_min
--w------- 1 root root 4096 2007-09-18 13:06 uevent
Here are my loaded modules:
barbara:~# lsmod
Module Size Used by
i2c_piix4 8140 0
adm1021 12368 0
i2c_dev 8548 0
freq_table 4576 0
button 6672 0
ac 5188 0
battery 9636 0
ipv6 226272 36
nfs 202828 3
lockd 54344 2 nfs
nfs_acl 3584 1 nfs
sunrpc 138812 4 nfs,lockd,nfs_acl
dm_snapshot 15552 0
dm_mirror 19152 0
dm_mod 50232 2 dm_snapshot,dm_mirror
joydev 9088 0
tsdev 7520 0
snd_maestro3 23300 1
snd_ac97_codec 83104 1 snd_maestro3
snd_ac97_bus 2400 1 snd_ac97_codec
snd_pcm_oss 38368 0
snd_mixer_oss 15200 1 snd_pcm_oss
snd_pcm 68676 4 snd_maestro3,snd_ac97_codec,snd_pcm_oss
snd_timer 20996 1 snd_pcm
snd_page_alloc 9640 1 snd_pcm
psmouse 35016 0
intel_agp 22140 1
snd 47012 11
snd_maestro3,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
pcmcia 34140 0
firmware_class 9600 1 pcmcia
shpchp 33024 0
serio_raw 6660 0
agpgart 29896 1 intel_agp
soundcore 9248 1 snd
pci_hotplug 28704 1 shpchp
irda 162588 0
floppy 53156 0
parport_pc 32132 0
parport 33256 1 parport_pc
rtc 12372 0
crc_ccitt 2240 1 irda
pcspkr 3072 0
i2c_core 19680 3 i2c_piix4,adm1021,i2c_dev
yenta_socket 24460 2
rsrc_nonstatic 11840 1 yenta_socket
pcmcia_core 36852 3 pcmcia,yenta_socket,rsrc_nonstatic
evdev 9088 0
ext3 119240 3
jbd 52456 1 ext3
mbcache 8356 1 ext3
ide_cd 36064 0
cdrom 32544 1 ide_cd
ide_disk 14848 6
8139too 25120 0
piix 9444 0 [permanent]
generic 4868 0 [permanent]
ide_core 110504 4 ide_cd,ide_disk,piix,generic
8139cp 21920 0
mii 5344 2 8139too,8139cp
uhci_hcd 21164 0
usbcore 112644 2 uhci_hcd
thermal 13608 0
processor 28840 1 thermal
fan 4804 0
Here's my CPU info:
barbara:~# cat /proc/cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 8
model name : Pentium III (Coppermine)
stepping : 3
cpu MHz : 601.404
cache size : 256 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat
pse36 mmx fxsr sse up
bogomips : 1203.80
-- System Information:
Debian Release: 4.0
APT prefers stable
APT policy: (990, 'stable')
Architecture: i386 (i686)
Shell: /bin/sh linked to /bin/bash
Kernel: Linux 2.6.18-5-686
Locale: LANG=sv_SE.ISO-8859-15, LC_CTYPE=sv_SE.ISO-8859-15 (charmap=ISO-8859-15)
Versions of packages lm-sensors depends on:
ii libc6 2.3.6.ds1-13etch2 GNU C Library: Shared libraries
ii libsensors3 1:2.10.1-3 library to read temperature/voltag
ii perl 5.8.8-7 Larry Wall's Practical Extraction
ii sed 4.1.5-1 The GNU sed stream editor
ii ucf 2.0020 Update Configuration File: preserv
lm-sensors recommends no packages.
-- debconf information:
* lm-sensors/create-devices: true
* lm-sensors/creating-devices:
lm-sensors/negatives:
* lm-sensors/thinkpad-confirmation: true
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
