Roman Stöckl-Schmidt a écrit : > Package: lm-sensors > Version: 1:2.10.1-3 > Severity: important > > I have an Asus P5B board, which is based on the intel 82801H chipset. > when running sensors-detect everything seems to go fine, the relevant > output is: > > >>> Now follows a summary of the probes I have just done. >>> Just press ENTER to continue: >>> >>> Driver `eeprom' (should be inserted): >>> Detects correctly: >>> * Bus `SMBus I801 adapter at 0400' >>> Busdriver `i2c-i801', I2C address 0x50 >>> Chip `eeprom' (confidence: 6) >>> * Bus `SMBus I801 adapter at 0400' >>> Busdriver `i2c-i801', I2C address 0x51 >>> Chip `eeprom' (confidence: 6) >>> >>> Driver `w83627ehf' (should be inserted): >>> Detects correctly: >>> * ISA bus address 0x0290 (Busdriver `i2c-isa') >>> Chip `Winbond W83627DHG Super IO Sensors' (confidence: 9) > > I also allowed to have the modules automatically loaded in /etc/modules > and that works flawlessly for i2c-i801 and eeprom, but w83627ehf fails > to load. > > when I try to modprobe it I get: > > "FATAL: Error inserting w83627ehf > (/lib/modules/2.6.18-5-686/kernel/drivers/hwmon/w83627ehf.ko): No such > device" > > That's as far as my wisdom goes, I'm very sorry since I can't provide > further information but I just don't have a clue where to fix the > problem.
Looks like a kernel problem. Anything in dmesg? -- .''`. Aurelien Jarno | GPG: 1024D/F1BCDB73 : :' : Debian developer | Electrical Engineer `. `' [EMAIL PROTECTED] | [EMAIL PROTECTED] `- people.debian.org/~aurel32 | www.aurel32.net -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
