Hi Andreas,
El miÃ, 06-04-2005 a las 21:08 +0200, Andreas Hartmann escribiÃ:
> Package: lshw
> Version: 02.03-2
> Severity: normal
>
>
>
> The output of lshw includes the section pasted below, in which the frequency
> and presumably the depth is reported incorrectly.
> Modeline and DefaultDepth setting in my XF86Config-4 set the graphics card
> to a vertical refresh rate of 90Hz and 24bit color depth. The refresh rate
> I have verified with the CRT's on-screen info display, which so far has
> always matched Modeline settings. Regarding the color depth, I don't know a
> way to determine the actual setting.
>
> *-display:0
> description: VGA compatible controller
> product: RV280 [Radeon 9200]
> vendor: ATI Technologies Inc
> physical id: 0
> bus info: [EMAIL PROTECTED]:00.0
> logical name: /dev/fb0
> version: 01
> size: 128MB
> width: 32 bits
> clock: 66MHz
> capabilities: vga bus_master cap_list fb
> configuration: depth=16 frequency=76.65Hz mode=1280x1024
> visual=truecolor xres=1280 yres=1024
> resources: iomemory:e8000000-efffffff ioport:d800-d8ff
> iomemory:d7800000-d780ffff irq:5
The reported information is ok. That's the kernel framebuffer options
and has nothing to do with the X11 configuration.
I'm going to close this bug. If you want, you can open a Wishlist bug
to include the X11 configuration.
Ghe Rivero
--
CPD - Universidad Pontificia de Salamanca
Ext. 7263 - Tlf. 923 277 136
.''`. Pienso, Luego Incordio
: :' :
`. `' Proudly running Debian GNU/Linux (Sid 2.6.9-smp Ext3)
`- www.debian.org www.upsa.es
GPG Key: 26F020F7
GPG fingerprint: 4986 39DA D152 050B 4699 9A71 66DB 5A36 26F0 20F7
signature.asc
Description: This is a digitally signed message part
