Hi Just want to check. This problem do not happen with an unmodified version of the kernel?
Regards, // Ola On Wed, Apr 25, 2007 at 11:31:57AM +0100, João Sousa wrote: > On Tuesday 24 April 2007 13:39, Alexey Dobriyan wrote: > > Please, rebuild kernel with CONFIG_CPU_FREQ_DEBUG=y option > > (right after "CPU Frequency scaling"), boot kernel with cpufreq.debug=7 > > option and post full "dmesg" output when oops occurs. > > Here it is. I took a couple of tries to get the bug. It seems to be most > probable during boot while using the battery of the laptop. > > The laptop is a 32bit black macbook. > > Linux version 2.6.18+openvz (Version: custom01) ([EMAIL PROTECTED]) (gcc > version > 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #3 SMP Tue Apr 24 15:24:32 > WEST 2007 > BIOS-provided physical RAM map: > BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) > BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) > BIOS-e820: 00000000000ede00 - 0000000000100000 (reserved) > BIOS-e820: 0000000000100000 - 000000007e0d0000 (usable) > BIOS-e820: 000000007e0d0000 - 000000007e2d1000 (ACPI NVS) > BIOS-e820: 000000007e2d1000 - 000000007eebf000 (ACPI data) > BIOS-e820: 000000007eebf000 - 000000007eeef000 (ACPI NVS) > BIOS-e820: 000000007eeef000 - 000000007ef00000 (ACPI data) > BIOS-e820: 000000007ef00000 - 0000000080000000 (reserved) > BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) > BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) > BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) > BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved) > BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) > BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved) > 1120MB HIGHMEM available. > 896MB LOWMEM available. > On node 0 totalpages: 516304 > DMA zone: 4096 pages, LIFO batch:0 > Normal zone: 225280 pages, LIFO batch:31 > HighMem zone: 286928 pages, LIFO batch:31 > DMI 2.4 present. > ACPI: RSDP (v002 APPLE ) @ 0x000fe020 > ACPI: XSDT (v001 APPLE Apple00 0x00000061 0x01000013) @ 0x7eefd120 > ACPI: FADT (v003 APPLE Apple00 0x00000061 Loki 0x0000005f) @ 0x7eefb000 > ACPI: HPET (v001 APPLE Apple00 0x00000001 Loki 0x0000005f) @ 0x7eefa000 > ACPI: MADT (v001 APPLE Apple00 0x00000001 Loki 0x0000005f) @ 0x7eef9000 > ACPI: MCFG (v001 APPLE Apple00 0x00000001 Loki 0x0000005f) @ 0x7eef8000 > ACPI: ASF! (v032 APPLE Apple00 0x00000001 Loki 0x0000005f) @ 0x7eef7000 > ACPI: SBST (v001 APPLE Apple00 0x00000001 Loki 0x0000005f) @ 0x7eef6000 > ACPI: ECDT (v001 APPLE Apple00 0x00000001 Loki 0x0000005f) @ 0x7eef5000 > ACPI: SSDT (v001 APPLE SataPri 0x00001000 INTL 0x20050309) @ 0x7eebc000 > ACPI: SSDT (v001 APPLE SataSec 0x00001000 INTL 0x20050309) @ 0x7eebb000 > ACPI: SSDT (v001 APPLE CpuPm 0x00003000 INTL 0x20050309) @ 0x7eeef000 > ACPI: DSDT (v001 APPLE MacBook 0x00010001 INTL 0x20050309) @ 0x00000000 > ACPI: PM-Timer IO Port: 0x408 > ACPI: Local APIC address 0xfee00000 > ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) > Processor #0 6:14 APIC version 20 > ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) > Processor #1 6:14 APIC version 20 > ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) > ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) > ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) > IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 > ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) > ACPI: IRQ0 used by override. > ACPI: IRQ2 used by override. > ACPI: IRQ9 used by override. > Enabling APIC mode: Flat. Using 1 I/O APICs > ACPI: HPET id: 0x8086a201 base: 0xfed00000 > Using ACPI (MADT) for SMP configuration information > Allocating PCI resources starting at 88000000 (gap: 80000000:60000000) > Detected 2129.943 MHz processor. > Built 1 zonelists. Total pages: 516304 > Kernel command line: BOOT_IMAGE=LinuxCPUDB=7 ro root=803 lpj=8000000 > cpufreq.debug=7 > mapped APIC to ffffd000 (fee00000) > mapped IOAPIC to ffffc000 (fec00000) > Enabling fast FPU save and restore... done. > Enabling unmasked SIMD FPU exception support... done. > Initializing CPU#0 > PID hash table entries: 4096 (order: 12, 16384 bytes) > Console: colour VGA+ 80x25 > Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) > Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) > Memory: 2037852k/2065216k available (1540k kernel code, 26160k reserved, 611k > data, 204k init, 1147712k highmem) > Checking if this processor honours the WP bit even in supervisor mode... Ok. > hpet0: at MMIO 0xfed00000 (virtual 0xf8800000), IRQs 2, 8, 0 > hpet0: 3 64-bit timers, 14318180 Hz > Using HPET for base-timer > Calibrating delay loop (skipped)... 4000.00 BogoMIPS preset > Mount-cache hash table entries: 512 > CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 > 0000c1a9 00000000 00000000 > CPU: After vendor identify, caps: bfe9fbff 00100000 00000000 00000000 > 0000c1a9 > 00000000 00000000 > monitor/mwait feature present. > using mwait in idle threads. > CPU: L1 I cache: 32K, L1 D cache: 32K > CPU: L2 cache: 2048K > CPU: Physical Processor ID: 0 > CPU: Processor Core ID: 0 > CPU: After all inits, caps: bfe9fbff 00100000 00000000 00000140 0000c1a9 > 00000000 00000000 > Intel machine check architecture supported. > Intel machine check reporting enabled on CPU#0. > Compat vDSO mapped to ffffe000. > Checking 'hlt' instruction... OK. > Freeing SMP alternatives: 16k freed > ACPI: Core revision 20060707 > Page beancounter hash is 131072 entries. > CPU0: Intel Genuine Intel(R) CPU 1500 @ 2.00GHz stepping 08 > Booting processor 1/1 eip 2000 > Initializing CPU#1 > Calibrating delay loop (skipped)... 4000.00 BogoMIPS preset > CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 > 0000c1a9 00000000 00000000 > CPU: After vendor identify, caps: bfe9fbff 00100000 00000000 00000000 > 0000c1a9 > 00000000 00000000 > monitor/mwait feature present. > CPU: L1 I cache: 32K, L1 D cache: 32K > CPU: L2 cache: 2048K > CPU: Physical Processor ID: 0 > CPU: Processor Core ID: 1 > CPU: After all inits, caps: bfe9fbff 00100000 00000000 00000140 0000c1a9 > 00000000 00000000 > Intel machine check architecture supported. > Intel machine check reporting enabled on CPU#1. > CPU1: Intel Genuine Intel(R) CPU 1500 @ 2.00GHz stepping 08 > Total of 2 processors activated (8000.00 BogoMIPS). > ENABLING IO-APIC IRQs > ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 > checking TSC synchronization across 2 CPUs: passed. > Brought up 2 CPUs > migration_cost=64 > checking if image is initramfs... it is > Freeing initrd memory: 4375k freed > NET: Registered protocol family 16 > ACPI: bus type pci registered > PCI: Using MMCONFIG > Setting up standard PCI resources > ACPI: Found ECDT > ACPI: Interpreter enabled > ACPI: Using IOAPIC for interrupt routing > ACPI: PCI Root Bridge [PCI0] (0000:00) > PCI: Probing PCI hardware (bus 00) > Boot video device is 0000:00:02.0 > PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 > PCI: Transparent bridge - 0000:00:1e.0 > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] > ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15) > ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15) > ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 > ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15) > ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. > ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. > ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 > ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12 14 15) > ACPI: Embedded Controller [EC] (gpe 23) interrupt mode. > Linux Plug and Play Support v0.97 (c) Adam Belay > pnp: PnP ACPI init > pnp: PnP ACPI: found 10 devices > PnPBIOS: Disabled by ACPI PNP > PCI: Using ACPI for IRQ routing > PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report > PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0 > PCI: Bridge: 0000:00:1c.0 > IO window: 1000-1fff > MEM window: 90200000-902fffff > PREFETCH window: 90500000-905fffff > PCI: Bridge: 0000:00:1c.1 > IO window: disabled. > MEM window: 90100000-901fffff > PREFETCH window: disabled. > PCI: Bridge: 0000:00:1e.0 > IO window: disabled. > MEM window: 90000000-900fffff > PREFETCH window: disabled. > ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 169 > PCI: Setting latency timer of device 0000:00:1c.0 to 64 > ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 177 > PCI: Setting latency timer of device 0000:00:1c.1 to 64 > PCI: Setting latency timer of device 0000:00:1e.0 to 64 > NET: Registered protocol family 2 > IP route cache hash table entries: 32768 (order: 5, 131072 bytes) > TCP established hash table entries: 131072 (order: 8, 1048576 bytes) > TCP bind hash table entries: 65536 (order: 7, 524288 bytes) > TCP: Hash tables configured (established 131072 bind 65536) > TCP reno registered > audit: initializing netlink socket (disabled) > audit(1177466198.896:1): initialized > highmem bounce pool size: 64 pages > VFS: Disk quotas dquot_6.5.1 > Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) > Initializing Cryptographic API > io scheduler noop registered > io scheduler anticipatory registered > io scheduler deadline registered > io scheduler cfq registered (default) > PCI: Setting latency timer of device 0000:00:1c.0 to 64 > assign_interrupt_mode Found MSI capability > Allocate Port Service[0000:00:1c.0:pcie00] > Allocate Port Service[0000:00:1c.0:pcie02] > Allocate Port Service[0000:00:1c.0:pcie03] > PCI: Setting latency timer of device 0000:00:1c.1 to 64 > assign_interrupt_mode Found MSI capability > Allocate Port Service[0000:00:1c.1:pcie00] > Allocate Port Service[0000:00:1c.1:pcie02] > Allocate Port Service[0000:00:1c.1:pcie03] > isapnp: Scanning for PnP cards... > isapnp: No Plug & Play device found > Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled > RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize > PNP: No PS/2 controller found. Probing ports directly. > i8042.c: No controller found. > mice: PS/2 mouse device common for all mice > TCP bic registered > NET: Registered protocol family 1 > NET: Registered protocol family 17 > NET: Registered protocol family 8 > NET: Registered protocol family 20 > Testing NMI watchdog ... OK. > Starting balanced_irq > Using IPI Shortcut mode > Freeing unused kernel memory: 204k freed > Time: tsc clocksource has been installed. > ACPI (exconfig-0455): Dynamic SSDT Load - OemId [APPLE ] OemTableId [ > Cpu0Ist] > [20060707] > ACPI (exconfig-0455): Dynamic SSDT Load - OemId [APPLE ] OemTableId [ > Cpu0Cst] > [20060707] > ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) > ACPI: Processor [CPU0] (supports 8 throttling states) > ACPI (exconfig-0455): Dynamic SSDT Load - OemId [APPLE ] OemTableId [ > Cpu1Ist] > [20060707] > ACPI (exconfig-0455): Dynamic SSDT Load - OemId [APPLE ] OemTableId [ > Cpu1Cst] > [20060707] > ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) > ACPI: Processor [CPU1] (supports 8 throttling states) > Time: hpet clocksource has been installed. > usbcore: registered new driver usbfs > usbcore: registered new driver hub > USB Universal Host Controller Interface driver v3.0 > ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 21 (level, low) -> IRQ 209 > PCI: Setting latency timer of device 0000:00:1d.0 to 64 > uhci_hcd 0000:00:1d.0: UHCI Host Controller > uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 > uhci_hcd 0000:00:1d.0: irq 209, io base 0x000020a0 > usb usb1: configuration #1 chosen from 1 choice > hub 1-0:1.0: USB hub found > hub 1-0:1.0: 2 ports detected > Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 > ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx > ieee1394: Initialized config rom entry `ip1394' > ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 21 (level, low) -> IRQ 209 > PCI: Setting latency timer of device 0000:00:1d.7 to 64 > ehci_hcd 0000:00:1d.7: EHCI Host Controller > ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 > ehci_hcd 0000:00:1d.7: debug port 1 > PCI: cache line size of 32 is not supported by device 0000:00:1d.7 > ehci_hcd 0000:00:1d.7: irq 209, io mem 0x90445400 > ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 > usb usb2: configuration #1 chosen from 1 choice > hub 2-0:1.0: USB hub found > hub 2-0:1.0: 8 ports detected > ICH7: IDE controller at PCI slot 0000:00:1f.1 > ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 217 > ICH7: chipset revision 2 > ICH7: not 100% native mode: will probe irqs later > ide0: BM-DMA at 0x20c0-0x20c7, BIOS settings: hda:DMA, hdb:pio > ide1: BM-DMA at 0x20c8-0x20cf, BIOS settings: hdc:pio, hdd:pio > Probing IDE interface ide0... > hda: MATSHITADVD-R UJ-857, ATAPI CD/DVD-ROM drive > usb 2-4: new high speed USB device using ehci_hcd and address 4 > usb 2-4: configuration #1 chosen from 1 choice > ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 > Probing IDE interface ide1... > usb 1-1: new low speed USB device using uhci_hcd and address 2 > ACPI: PCI Interrupt 0000:03:03.0[A] -> GSI 19 (level, low) -> IRQ 225 > ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[225] MMIO=[90000000-900007ff] > Max Packet=[2048] IR/IT contexts=[8/8] > SCSI subsystem initialized > libata version 2.00 loaded. > ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 225 > PCI: Setting latency timer of device 0000:00:1d.1 to 64 > uhci_hcd 0000:00:1d.1: UHCI Host Controller > uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 > uhci_hcd 0000:00:1d.1: irq 225, io base 0x00002080 > usb usb3: configuration #1 chosen from 1 choice > hub 3-0:1.0: USB hub found > hub 3-0:1.0: 2 ports detected > hda: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(66) > Uniform CD-ROM driver Revision: 3.20 > usb 1-1: configuration #1 chosen from 1 choice > ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 217 > PCI: Setting latency timer of device 0000:00:1d.2 to 64 > uhci_hcd 0000:00:1d.2: UHCI Host Controller > uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 > uhci_hcd 0000:00:1d.2: irq 217, io base 0x00002060 > usb usb4: configuration #1 chosen from 1 choice > hub 4-0:1.0: USB hub found > hub 4-0:1.0: 2 ports detected > ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 177 > PCI: Setting latency timer of device 0000:00:1d.3 to 64 > uhci_hcd 0000:00:1d.3: UHCI Host Controller > uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 > uhci_hcd 0000:00:1d.3: irq 177, io base 0x00002040 > usb usb5: configuration #1 chosen from 1 choice > hub 5-0:1.0: USB hub found > hub 5-0:1.0: 2 ports detected > ata_piix 0000:00:1f.2: version 2.00 > ata_piix 0000:00:1f.2: MAP [ P0 P2 XX XX ] > ata_piix 0000:00:1f.2: invalid MAP value 0 > usb 1-2: new full speed USB device using uhci_hcd and address 3 > PCI: Enabling device 0000:00:1f.2 (0005 -> 0007) > ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 225 > PCI: Setting latency timer of device 0000:00:1f.2 to 64 > ata1: SATA max UDMA/133 cmd 0x20D8 ctl 0x20FE bmdma 0x2020 irq 225 > ata2: SATA max UDMA/133 cmd 0x20D0 ctl 0x20FA bmdma 0x2028 irq 225 > scsi0 : ata_piix > usb 1-2: configuration #1 chosen from 1 choice > ATA: abnormal status 0x7F on port 0x20DF > ATA: abnormal status 0x7F on port 0x20DF > ata1.01: ATA-6, max UDMA/100, 156301488 sectors: LBA48 NCQ (depth 0/32) > ata1.01: ata1: dev 1 multi count 16 > ata1.01: configured for UDMA/100 > scsi1 : ata_piix > ATA: abnormal status 0x7F on port 0x20D7 > Vendor: ATA Model: TOSHIBA MK8032GS Rev: AS11 > Type: Direct-Access ANSI SCSI revision: 05 > SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB) > sda: Write Protect is off > sda: Mode Sense: 00 3a 00 00 > SCSI device sda: drive cache: write back > SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB) > sda: Write Protect is off > sda: Mode Sense: 00 3a 00 00 > SCSI device sda: drive cache: write back > sda:<6>usb 4-2: new full speed USB device using uhci_hcd and address 2 > sda1 sda2 sda3 > sd 0:0:1:0: Attached scsi disk sda > usb 4-2: configuration #1 chosen from 1 choice > ieee1394: Host added: ID:BUS[0-00:1023] GUID[0017f2fffe59f52a] > usb 5-1: new full speed USB device using uhci_hcd and address 2 > usb 5-1: configuration #1 chosen from 1 choice > usbcore: registered new driver hiddev > input: Logitech USB-PS/2 Optical Mouse as /class/input/input0 > input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on > usb-0000:00:1d.0-1 > input: Apple Computer Apple Internal Keyboard / Trackpad > as /class/input/input1 > input: USB HID v1.11 Keyboard [Apple Computer Apple Internal Keyboard / > Trackpad] on usb-0000:00:1d.0-2 > input: Apple Computer Apple Internal Keyboard / Trackpad > as /class/input/input2 > input: USB HID v1.11 Mouse [Apple Computer Apple Internal Keyboard / > Trackpad] > on usb-0000:00:1d.0-2 > input: Apple Computer Apple Internal Keyboard / Trackpad > as /class/input/input3 > input: USB HID v1.11 Device [Apple Computer Apple Internal Keyboard / > Trackpad] on usb-0000:00:1d.0-2 > hiddev96: USB HID v1.11 Device [Apple Computer, Inc. IR Receiver] on > usb-0000:00:1d.2-2 > input: HID 05ac:1000 as /class/input/input4 > input: USB HID v1.11 Keyboard [HID 05ac:1000] on usb-0000:00:1d.3-1 > input: HID 05ac:1000 as /class/input/input5 > input: USB HID v1.11 Mouse [HID 05ac:1000] on usb-0000:00:1d.3-1 > usbcore: registered new driver usbhid > drivers/usb/input/hid-core.c: v2.6:USB HID core driver > Probing IDE interface ide1... > EXT3-fs: INFO: recovery required on readonly filesystem. > EXT3-fs: write access will be enabled during recovery. > kjournald starting. Commit interval 5 seconds > EXT3-fs: sda3: orphan cleanup on readonly fs > ext3_orphan_cleanup: deleting unreferenced inode 3719207 > ext3_orphan_cleanup: deleting unreferenced inode 3719202 > ext3_orphan_cleanup: deleting unreferenced inode 3719200 > ext3_orphan_cleanup: deleting unreferenced inode 3719189 > ext3_orphan_cleanup: deleting unreferenced inode 3719188 > EXT3-fs: sda3: 5 orphan inodes deleted > EXT3-fs: recovery complete. > EXT3-fs: mounted filesystem with ordered data mode. > eth1394: eth0: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0) > ts: Compaq touchscreen protocol output > Linux agpgart interface v0.101 (c) Dave Jones > Linux video capture interface: v2.00 > ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 177 > PCI: Setting latency timer of device 0000:01:00.0 to 64 > sky2 v1.5 addr 0x90200000 irq 177 Yukon-EC (0xb6) rev 2 > sky2 eth0: addr 00:17:f2:2a:1d:eb > input: PC Speaker as /class/input/input6 > Real Time Clock Driver v1.12ac > agpgart: Detected an Intel 945GM Chipset. > agpgart: Detected 16124K stolen memory. > agpgart: AGP aperture is 256M @ 0x80000000 > ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 225 > intel_rng: FWH not detected > ath_hal: module license 'Proprietary' taints kernel. > ath_hal: 0.9.18.0 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) > uvcvideo: Found UVC 0.00 device <unnamed> (05ac:8300) > uvcvideo: No valid video chain found. > uvcvideo: Possible an Apple iSight without firmware loaded; please read the > documentation, load the firmware and re-load the driver.<6>usbcore: > registered new driver uvcvideo > USB Video Class driver (v0.1.0-c) > wlan: 0.8.4.2 (0.9.3) > ath_pci: 0.9.4.5 (0.9.3) > ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 169 > PCI: Setting latency timer of device 0000:02:00.0 to 64 > ath_rate_sample: 1.2 (0.9.3) > wifi0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps > wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps > wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps > 36Mbps 48Mbps 54Mbps > wifi0: turboG rates: 6Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps > wifi0: H/W encryption support: WEP AES AES_CCM TKIP > wifi0: mac 10.3 phy 6.1 radio 10.2 > wifi0: Use hw queue 1 for WME_AC_BE traffic > wifi0: Use hw queue 0 for WME_AC_BK traffic > wifi0: Use hw queue 2 for WME_AC_VI traffic > wifi0: Use hw queue 3 for WME_AC_VO traffic > wifi0: Use hw queue 8 for CAB traffic > wifi0: Use hw queue 9 for beacons > wifi0: Atheros 5424/2424: mem=0x90100000, irq=169 > ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 50 > PCI: Setting latency timer of device 0000:00:1b.0 to 64 > hda_intel: azx_get_response timeout, switching to single_cmd mode... > EXT3 FS on sda3, internal journal > loop: loaded (max 8 devices) > ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1) > ieee1394: sbp2: Try serialize_io=0 for better performance > fuse init (API version 7.7) > device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: > [EMAIL PROTECTED] > hfs: write access to a jounaled filesystem is not supported, use the force > option at your own risk, mounting read-only. > Adding 3145720k swap on /swapfile. Priority:-1 extents:1143 across:56673548k > NET: Registered protocol family 10 > lo: Disabled Privacy Extensions > IPv6 over IPv4 tunneling driver > sky2 eth0: enabling interface > ADDRCONF(NETDEV_UP): eth0: link is not ready > dummy0: no IPv6 routers present > ip_tables: (C) 2000-2006 Netfilter Core Team > Netfilter messages via NETLINK v0.30. > ip_conntrack version 2.4 (8192 buckets, 65536 max) - 228 bytes per conntrack > ClusterIP Version 0.8 loaded successfully > Bridge firewalling registered > ip6_tables: (C) 2000-2006 Netfilter Core Team > ACPI: Battery Slot [BAT0] (battery present) > ACPI: AC Adapter [ADP1] (off-line) > ACPI: Power Button (FF) [PWRF] > ACPI: Lid Switch [LID0] > ACPI: Power Button (CM) [PWRB] > ACPI: Sleep Button (CM) [SLPB] > lp: driver loaded but no devices found > ppdev: user-space parallel port driver > Bluetooth: Core ver 2.10 > NET: Registered protocol family 31 > Bluetooth: HCI device and connection manager initialized > Bluetooth: HCI socket layer initialized > Bluetooth: L2CAP ver 2.8 > Bluetooth: L2CAP socket layer initialized > usb 5-1: usbfs: USBDEVFS_CONTROL failed cmd hid2hci rqt 64 rq 0 len 0 ret -84 > Bluetooth: RFCOMM socket layer initialized > Bluetooth: RFCOMM TTY layer initialized > Bluetooth: RFCOMM ver 1.8 > cpufreq-core: trying to register driver centrino > cpufreq-core: adding CPU 0 > speedstep-centrino: adding state 0 with frequency 2000000 and control value > 0c2c > speedstep-centrino: adding state 1 with frequency 1833000 and control value > 0b28 > speedstep-centrino: adding state 2 with frequency 1667000 and control value > 0a24 > speedstep-centrino: adding state 3 with frequency 1500000 and control value > 0920 > speedstep-centrino: adding state 4 with frequency 1333000 and control value > 081c > speedstep-centrino: adding state 5 with frequency 1000000 and control value > 0613 > speedstep-centrino: centrino_cpu_init: cur=0kHz > freq-table: table entry 0: 2000000 kHz, 3116 index > freq-table: table entry 1: 1833000 kHz, 2856 index > freq-table: table entry 2: 1667000 kHz, 2596 index > freq-table: table entry 3: 1500000 kHz, 2336 index > freq-table: table entry 4: 1333000 kHz, 2076 index > freq-table: table entry 5: 1000000 kHz, 1555 index > freq-table: setting show_table for cpu 0 to f6a0be40 > cpufreq-core: setting new policy for CPU 0: 1000000 - 2000000 kHz > freq-table: request for verification of policy (1000000 - 2000000 kHz) for > cpu > 0 > freq-table: verification lead to (1000000 - 2000000 kHz) for cpu 0 > freq-table: request for verification of policy (1000000 - 2000000 kHz) for > cpu > 0 > freq-table: verification lead to (1000000 - 2000000 kHz) for cpu 0 > cpufreq-core: new min and max freqs are 1000000 - 2000000 kHz > cpufreq-core: governor switch > cpufreq-core: __cpufreq_governor for CPU 0, event 1 > performance: setting to 2000000 kHz because of event 1 > cpufreq-core: target for CPU 0: 2000000 kHz, relation 1 > freq-table: request for target 2000000 kHz (relation: 1) for cpu 0 > freq-table: target is 0 (2000000 kHz, 3116) > speedstep-centrino: couldn't limit to CPUs in this domain > cpufreq-core: governor: change or update limits > cpufreq-core: __cpufreq_governor for CPU 0, event 3 > performance: setting to 2000000 kHz because of event 3 > cpufreq-core: target for CPU 0: 2000000 kHz, relation 1 > freq-table: request for target 2000000 kHz (relation: 1) for cpu 0 > freq-table: target is 0 (2000000 kHz, 3116) > speedstep-centrino: couldn't limit to CPUs in this domain > cpufreq-core: initialization complete > cpufreq-core: adding CPU 1 > speedstep-centrino: adding state 0 with frequency 2000000 and control value > 0c2c > speedstep-centrino: adding state 1 with frequency 1833000 and control value > 0b28 > speedstep-centrino: adding state 2 with frequency 1667000 and control value > 0a24 > speedstep-centrino: adding state 3 with frequency 1500000 and control value > 0920 > speedstep-centrino: adding state 4 with frequency 1333000 and control value > 081c > speedstep-centrino: adding state 5 with frequency 1000000 and control value > 0613 > speedstep-centrino: centrino_cpu_init: cur=0kHz > freq-table: table entry 0: 2000000 kHz, 3116 index > freq-table: table entry 1: 1833000 kHz, 2856 index > freq-table: table entry 2: 1667000 kHz, 2596 index > freq-table: table entry 3: 1500000 kHz, 2336 index > freq-table: table entry 4: 1333000 kHz, 2076 index > freq-table: table entry 5: 1000000 kHz, 1555 index > freq-table: setting show_table for cpu 1 to f6536840 > cpufreq-core: setting new policy for CPU 1: 1000000 - 2000000 kHz > freq-table: request for verification of policy (1000000 - 2000000 kHz) for > cpu > 1 > freq-table: verification lead to (1000000 - 2000000 kHz) for cpu 1 > freq-table: request for verification of policy (1000000 - 2000000 kHz) for > cpu > 1 > freq-table: verification lead to (1000000 - 2000000 kHz) for cpu 1 > cpufreq-core: new min and max freqs are 1000000 - 2000000 kHz > cpufreq-core: governor switch > cpufreq-core: __cpufreq_governor for CPU 1, event 1 > performance: setting to 2000000 kHz because of event 1 > cpufreq-core: target for CPU 1: 2000000 kHz, relation 1 > freq-table: request for target 2000000 kHz (relation: 1) for cpu 1 > freq-table: target is 0 (2000000 kHz, 3116) > speedstep-centrino: couldn't limit to CPUs in this domain > cpufreq-core: governor: change or update limits > cpufreq-core: __cpufreq_governor for CPU 1, event 3 > performance: setting to 2000000 kHz because of event 3 > cpufreq-core: target for CPU 1: 2000000 kHz, relation 1 > freq-table: request for target 2000000 kHz (relation: 1) for cpu 1 > freq-table: target is 0 (2000000 kHz, 3116) > speedstep-centrino: couldn't limit to CPUs in this domain > cpufreq-core: initialization complete > cpufreq-core: driver centrino up and running > usb 5-1: USB disconnect, address 2 > usb 5-1: new full speed USB device using uhci_hcd and address 3 > usb 5-1: configuration #1 chosen from 1 choice > cpufreq-core: setting new policy for CPU 0: 1000000 - 2000000 kHz > freq-table: request for verification of policy (1000000 - 2000000 kHz) for > cpu > 0 > freq-table: verification lead to (1000000 - 2000000 kHz) for cpu 0 > freq-table: request for verification of policy (1000000 - 2000000 kHz) for > cpu > 0 > freq-table: verification lead to (1000000 - 2000000 kHz) for cpu 0 > cpufreq-core: new min and max freqs are 1000000 - 2000000 kHz > cpufreq-core: governor switch > cpufreq-core: __cpufreq_governor for CPU 0, event 2 > cpufreq-core: __cpufreq_governor for CPU 0, event 1 > cpufreq-core: starting governor ondemand failed > cpufreq-core: __cpufreq_governor for CPU 0, event 1 > performance: setting to 2000000 kHz because of event 1 > cpufreq-core: target for CPU 0: 2000000 kHz, relation 1 > freq-table: request for target 2000000 kHz (relation: 1) for cpu 0 > freq-table: target is 0 (2000000 kHz, 3116) > speedstep-centrino: couldn't limit to CPUs in this domain > cpufreq-core: setting new policy for CPU 0: 1000000 - 2000000 kHz > freq-table: request for verification of policy (1000000 - 2000000 kHz) for > cpu > 0 > freq-table: verification lead to (1000000 - 2000000 kHz) for cpu 0 > freq-table: request for verification of policy (1000000 - 2000000 kHz) for > cpu > 0 > freq-table: verification lead to (1000000 - 2000000 kHz) for cpu 0 > cpufreq-core: new min and max freqs are 1000000 - 2000000 kHz > cpufreq-core: governor switch > cpufreq-core: __cpufreq_governor for CPU 0, event 2 > cpufreq-core: __cpufreq_governor for CPU 0, event 1 > ------------[ cut here ]------------ > kernel BUG at drivers/cpufreq/cpufreq_userspace.c:138! > invalid opcode: 0000 [#1] > SMP > Modules linked in: cpufreq_ondemand cpufreq_userspace cpufreq_powersave > speedstep_centrino freq_table rfcomm l2cap bluetooth ppdev parport_pc lp > parport button ac battery xt_mac xt_tcpudp ip6table_filter ip6_tables > xt_state xt_pkttype iptable_raw xt_CLASSIFY xt_CONNMARK xt_MARK xt_length > xt_connmark xt_physdev bridge xt_policy xt_multiport xt_conntrack > iptable_mangle ipt_ULOG ipt_TTL ipt_ttl ipt_TOS ipt_tos ipt_TCPMSS ipt_SAME > ipt_REJECT ipt_REDIRECT ipt_recent ipt_owner ipt_NETMAP ipt_MASQUERADE > ipt_LOG ipt_iprange ipt_hashlimit ipt_ECN ipt_ecn ipt_DSCP ipt_dscp > ipt_CLUSTERIP ipt_ah ipt_addrtype ip_nat_irc ip_nat_tftp ip_nat_ftp > ip_conntrack_irc ip_conntrack_tftp ip_conntrack_ftp iptable_nat ip_nat > ip_conntrack nfnetlink iptable_filter ip_tables x_tables dummy ipv6 nls_utf8 > hfsplus dm_snapshot dm_mirror dm_mod fuse sbp2 loop snd_hda_intel > snd_hda_codec snd_pcm_oss snd_mixer_oss snd_pcm wlan_scan_sta snd_timer > ath_rate_sample snd ath_pci wlan uvcvideo ath_hal i2c_i801 intel_agp rtc > pcspkr sky2 videodev v4l1_compat v4l2_common i2c_core soundcore agpgart > snd_page_alloc tsdev evdev eth1394 ext3 jbd mbcache ide_generic sd_mod usbhid > ide_cd cdrom ata_piix libata scsi_mod ohci1394 ieee1394 generic piix ide_core > ehci_hcd uhci_hcd usbcore thermal processor fan > CPU: 1, VCPU: 0.0 > EIP: 0060:[<f929106a>] Tainted: P VLI > EFLAGS: 00010246 (2.6.18+openvz #3) > EIP is at cpufreq_governor_userspace+0x3e/0x1c2 [cpufreq_userspace] > eax: ffffffff ebx: 00000000 ecx: ffffffea edx: 00000000 > esi: f6458880 edi: ffffffea ebp: f6458880 esp: f610de18 > ds: 007b es: 007b ss: 0068 > Process powersaved (pid: 13108, veid: 0, ti=f610c000 task=f6178700 > task.ti=f610c000) > Stack: f6458880 00000001 c0215c2e 00000001 c02a9b66 c02a9bcd 00000000 > 00000001 > f610de60 00000000 c02e0920 c0215ddf f9291f40 f64588ac f6458880 > f610df2c > c0215fdf 0000000a 00000001 00000002 00000000 001e8480 000f4240 > 00002710 > Call Trace: > [<c0215c2e>] __cpufreq_governor+0x54/0xd1 > [<c0215ddf>] __cpufreq_set_policy+0x134/0x197 > [<c0215fdf>] store_scaling_governor+0x13e/0x17d > [<c02164c3>] handle_update+0x0/0x20 > [<c01b0065>] cfq_kick_queue+0x7c/0x80 > [<c0215ea1>] store_scaling_governor+0x0/0x17d > [<c0215666>] store+0x2e/0x3e > [<c01970c1>] sysfs_write_file+0x91/0xb9 > [<c0197030>] sysfs_write_file+0x0/0xb9 > [<c016107b>] vfs_write+0x83/0x125 > [<c01616c7>] sys_write+0x3c/0x9e > [<c0102987>] syscall_call+0x7/0xb > Code: 0f 84 1e 01 00 00 31 c9 4a 0f 85 9b 01 00 00 0f a3 1d 10 96 31 c0 19 c0 > b9 ea ff ff ff 85 c0 0f 84 85 01 00 00 83 7e 20 00 75 0b <0f> 0b 66 b8 8a 00 > b8 f8 12 29 f9 b8 60 1f 29 f9 e8 e6 e5 fe c6 > EIP: [<f929106a>] cpufreq_governor_userspace+0x3e/0x1c2 [cpufreq_userspace] > SS:ESP 0068:f610de18 > Bluetooth: HCI USB driver ver 2.9 > usbcore: registered new driver hci_usb > [drm] Initialized drm 1.0.1 20051102 > ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 177 > [drm] Initialized i915 1.5.0 20060119 on minor 0 > > > -- > > > > -- --------------------- Ola Lundqvist --------------------------- / [EMAIL PROTECTED] Annebergsslingan 37 \ | [EMAIL PROTECTED] 654 65 KARLSTAD | | +46 (0)54-10 14 30 +46 (0)70-332 1551 | | http://opalsys.net/ UIN/icq: 4912500 | \ gpg/f.p.: 7090 A92B 18FE 7994 0C36 4FE4 18A1 B1CF 0FE5 3DD9 / --------------------------------------------------------------- -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
