I have only noticed the oops when running an openvz patched kernel. It does not happen always, it is more frequent during boot and when operating on battery. Some months ago, it would happen everyboot.
Sorry for not reporting it then, but I was just curious of the patch and thougt that it was me missmatching debian testing kernels with the patch. JS On Wednesday 25 April 2007 11:56, Ola Lundqvist wrote: > Hi > > Just want to check. This problem do not happen with an unmodified > version of the kernel? > > Regards, > > // Ola > > On Wed, Apr 25, 2007 at 11:31:57AM +0100, João Sousa wrote: > > On Tuesday 24 April 2007 13:39, Alexey Dobriyan wrote: > > > Please, rebuild kernel with CONFIG_CPU_FREQ_DEBUG=y option > > > (right after "CPU Frequency scaling"), boot kernel with cpufreq.debug=7 > > > option and post full "dmesg" output when oops occurs. > > > > Here it is. I took a couple of tries to get the bug. It seems to be most > > probable during boot while using the battery of the laptop. > > > > The laptop is a 32bit black macbook. > > > > Linux version 2.6.18+openvz (Version: custom01) ([EMAIL PROTECTED]) (gcc > > version > > 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #3 SMP Tue Apr 24 15:24:32 > > WEST 2007 > > BIOS-provided physical RAM map: > > BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) > > BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) > > BIOS-e820: 00000000000ede00 - 0000000000100000 (reserved) > > BIOS-e820: 0000000000100000 - 000000007e0d0000 (usable) > > BIOS-e820: 000000007e0d0000 - 000000007e2d1000 (ACPI NVS) > > BIOS-e820: 000000007e2d1000 - 000000007eebf000 (ACPI data) > > BIOS-e820: 000000007eebf000 - 000000007eeef000 (ACPI NVS) > > BIOS-e820: 000000007eeef000 - 000000007ef00000 (ACPI data) > > BIOS-e820: 000000007ef00000 - 0000000080000000 (reserved) > > BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) > > BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) > > BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) > > BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved) > > BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) > > BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved) > > 1120MB HIGHMEM available. > > 896MB LOWMEM available. > > On node 0 totalpages: 516304 > > DMA zone: 4096 pages, LIFO batch:0 > > Normal zone: 225280 pages, LIFO batch:31 > > HighMem zone: 286928 pages, LIFO batch:31 > > DMI 2.4 present. > > ACPI: RSDP (v002 APPLE ) @ 0x000fe020 > > ACPI: XSDT (v001 APPLE Apple00 0x00000061 0x01000013) @ 0x7eefd120 > > ACPI: FADT (v003 APPLE Apple00 0x00000061 Loki 0x0000005f) @ 0x7eefb000 > > ACPI: HPET (v001 APPLE Apple00 0x00000001 Loki 0x0000005f) @ 0x7eefa000 > > ACPI: MADT (v001 APPLE Apple00 0x00000001 Loki 0x0000005f) @ 0x7eef9000 > > ACPI: MCFG (v001 APPLE Apple00 0x00000001 Loki 0x0000005f) @ 0x7eef8000 > > ACPI: ASF! (v032 APPLE Apple00 0x00000001 Loki 0x0000005f) @ 0x7eef7000 > > ACPI: SBST (v001 APPLE Apple00 0x00000001 Loki 0x0000005f) @ 0x7eef6000 > > ACPI: ECDT (v001 APPLE Apple00 0x00000001 Loki 0x0000005f) @ 0x7eef5000 > > ACPI: SSDT (v001 APPLE SataPri 0x00001000 INTL 0x20050309) @ 0x7eebc000 > > ACPI: SSDT (v001 APPLE SataSec 0x00001000 INTL 0x20050309) @ 0x7eebb000 > > ACPI: SSDT (v001 APPLE CpuPm 0x00003000 INTL 0x20050309) @ 0x7eeef000 > > ACPI: DSDT (v001 APPLE MacBook 0x00010001 INTL 0x20050309) @ 0x00000000 > > ACPI: PM-Timer IO Port: 0x408 > > ACPI: Local APIC address 0xfee00000 > > ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) > > Processor #0 6:14 APIC version 20 > > ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) > > Processor #1 6:14 APIC version 20 > > ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) > > ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) > > ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) > > IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 > > ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > > ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) > > ACPI: IRQ0 used by override. > > ACPI: IRQ2 used by override. > > ACPI: IRQ9 used by override. > > Enabling APIC mode: Flat. Using 1 I/O APICs > > ACPI: HPET id: 0x8086a201 base: 0xfed00000 > > Using ACPI (MADT) for SMP configuration information > > Allocating PCI resources starting at 88000000 (gap: 80000000:60000000) > > Detected 2129.943 MHz processor. > > Built 1 zonelists. Total pages: 516304 > > Kernel command line: BOOT_IMAGE=LinuxCPUDB=7 ro root=803 lpj=8000000 > > cpufreq.debug=7 > > mapped APIC to ffffd000 (fee00000) > > mapped IOAPIC to ffffc000 (fec00000) > > Enabling fast FPU save and restore... done. > > Enabling unmasked SIMD FPU exception support... done. > > Initializing CPU#0 > > PID hash table entries: 4096 (order: 12, 16384 bytes) > > Console: colour VGA+ 80x25 > > Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) > > Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) > > Memory: 2037852k/2065216k available (1540k kernel code, 26160k reserved, > > 611k data, 204k init, 1147712k highmem) > > Checking if this processor honours the WP bit even in supervisor mode... > > Ok. hpet0: at MMIO 0xfed00000 (virtual 0xf8800000), IRQs 2, 8, 0 > > hpet0: 3 64-bit timers, 14318180 Hz > > Using HPET for base-timer > > Calibrating delay loop (skipped)... 4000.00 BogoMIPS preset > > Mount-cache hash table entries: 512 > > CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 > > 0000c1a9 00000000 00000000 > > CPU: After vendor identify, caps: bfe9fbff 00100000 00000000 00000000 > > 0000c1a9 00000000 00000000 > > monitor/mwait feature present. > > using mwait in idle threads. > > CPU: L1 I cache: 32K, L1 D cache: 32K > > CPU: L2 cache: 2048K > > CPU: Physical Processor ID: 0 > > CPU: Processor Core ID: 0 > > CPU: After all inits, caps: bfe9fbff 00100000 00000000 00000140 0000c1a9 > > 00000000 00000000 > > Intel machine check architecture supported. > > Intel machine check reporting enabled on CPU#0. > > Compat vDSO mapped to ffffe000. > > Checking 'hlt' instruction... OK. > > Freeing SMP alternatives: 16k freed > > ACPI: Core revision 20060707 > > Page beancounter hash is 131072 entries. > > CPU0: Intel Genuine Intel(R) CPU 1500 @ 2.00GHz stepping 08 > > Booting processor 1/1 eip 2000 > > Initializing CPU#1 > > Calibrating delay loop (skipped)... 4000.00 BogoMIPS preset > > CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 > > 0000c1a9 00000000 00000000 > > CPU: After vendor identify, caps: bfe9fbff 00100000 00000000 00000000 > > 0000c1a9 00000000 00000000 > > monitor/mwait feature present. > > CPU: L1 I cache: 32K, L1 D cache: 32K > > CPU: L2 cache: 2048K > > CPU: Physical Processor ID: 0 > > CPU: Processor Core ID: 1 > > CPU: After all inits, caps: bfe9fbff 00100000 00000000 00000140 0000c1a9 > > 00000000 00000000 > > Intel machine check architecture supported. > > Intel machine check reporting enabled on CPU#1. > > CPU1: Intel Genuine Intel(R) CPU 1500 @ 2.00GHz stepping 08 > > Total of 2 processors activated (8000.00 BogoMIPS). > > ENABLING IO-APIC IRQs > > ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 > > checking TSC synchronization across 2 CPUs: passed. > > Brought up 2 CPUs > > migration_cost=64 > > checking if image is initramfs... it is > > Freeing initrd memory: 4375k freed > > NET: Registered protocol family 16 > > ACPI: bus type pci registered > > PCI: Using MMCONFIG > > Setting up standard PCI resources > > ACPI: Found ECDT > > ACPI: Interpreter enabled > > ACPI: Using IOAPIC for interrupt routing > > ACPI: PCI Root Bridge [PCI0] (0000:00) > > PCI: Probing PCI hardware (bus 00) > > Boot video device is 0000:00:02.0 > > PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 > > PCI: Transparent bridge - 0000:00:1e.0 > > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] > > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] > > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] > > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] > > ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15) > > ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15) > > ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 > > ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15) > > ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, > > disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) > > *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 > > 15) *11 ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12 14 15) > > ACPI: Embedded Controller [EC] (gpe 23) interrupt mode. > > Linux Plug and Play Support v0.97 (c) Adam Belay > > pnp: PnP ACPI init > > pnp: PnP ACPI: found 10 devices > > PnPBIOS: Disabled by ACPI PNP > > PCI: Using ACPI for IRQ routing > > PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a > > report PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0 > > PCI: Bridge: 0000:00:1c.0 > > IO window: 1000-1fff > > MEM window: 90200000-902fffff > > PREFETCH window: 90500000-905fffff > > PCI: Bridge: 0000:00:1c.1 > > IO window: disabled. > > MEM window: 90100000-901fffff > > PREFETCH window: disabled. > > PCI: Bridge: 0000:00:1e.0 > > IO window: disabled. > > MEM window: 90000000-900fffff > > PREFETCH window: disabled. > > ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 169 > > PCI: Setting latency timer of device 0000:00:1c.0 to 64 > > ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 177 > > PCI: Setting latency timer of device 0000:00:1c.1 to 64 > > PCI: Setting latency timer of device 0000:00:1e.0 to 64 > > NET: Registered protocol family 2 > > IP route cache hash table entries: 32768 (order: 5, 131072 bytes) > > TCP established hash table entries: 131072 (order: 8, 1048576 bytes) > > TCP bind hash table entries: 65536 (order: 7, 524288 bytes) > > TCP: Hash tables configured (established 131072 bind 65536) > > TCP reno registered > > audit: initializing netlink socket (disabled) > > audit(1177466198.896:1): initialized > > highmem bounce pool size: 64 pages > > VFS: Disk quotas dquot_6.5.1 > > Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) > > Initializing Cryptographic API > > io scheduler noop registered > > io scheduler anticipatory registered > > io scheduler deadline registered > > io scheduler cfq registered (default) > > PCI: Setting latency timer of device 0000:00:1c.0 to 64 > > assign_interrupt_mode Found MSI capability > > Allocate Port Service[0000:00:1c.0:pcie00] > > Allocate Port Service[0000:00:1c.0:pcie02] > > Allocate Port Service[0000:00:1c.0:pcie03] > > PCI: Setting latency timer of device 0000:00:1c.1 to 64 > > assign_interrupt_mode Found MSI capability > > Allocate Port Service[0000:00:1c.1:pcie00] > > Allocate Port Service[0000:00:1c.1:pcie02] > > Allocate Port Service[0000:00:1c.1:pcie03] > > isapnp: Scanning for PnP cards... > > isapnp: No Plug & Play device found > > Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled > > RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize > > PNP: No PS/2 controller found. Probing ports directly. > > i8042.c: No controller found. > > mice: PS/2 mouse device common for all mice > > TCP bic registered > > NET: Registered protocol family 1 > > NET: Registered protocol family 17 > > NET: Registered protocol family 8 > > NET: Registered protocol family 20 > > Testing NMI watchdog ... OK. > > Starting balanced_irq > > Using IPI Shortcut mode > > Freeing unused kernel memory: 204k freed > > Time: tsc clocksource has been installed. > > ACPI (exconfig-0455): Dynamic SSDT Load - OemId [APPLE ] OemTableId [ > > Cpu0Ist] [20060707] > > ACPI (exconfig-0455): Dynamic SSDT Load - OemId [APPLE ] OemTableId [ > > Cpu0Cst] [20060707] > > ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) > > ACPI: Processor [CPU0] (supports 8 throttling states) > > ACPI (exconfig-0455): Dynamic SSDT Load - OemId [APPLE ] OemTableId [ > > Cpu1Ist] [20060707] > > ACPI (exconfig-0455): Dynamic SSDT Load - OemId [APPLE ] OemTableId [ > > Cpu1Cst] [20060707] > > ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) > > ACPI: Processor [CPU1] (supports 8 throttling states) > > Time: hpet clocksource has been installed. > > usbcore: registered new driver usbfs > > usbcore: registered new driver hub > > USB Universal Host Controller Interface driver v3.0 > > ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 21 (level, low) -> IRQ 209 > > PCI: Setting latency timer of device 0000:00:1d.0 to 64 > > uhci_hcd 0000:00:1d.0: UHCI Host Controller > > uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 > > uhci_hcd 0000:00:1d.0: irq 209, io base 0x000020a0 > > usb usb1: configuration #1 chosen from 1 choice > > hub 1-0:1.0: USB hub found > > hub 1-0:1.0: 2 ports detected > > Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 > > ide: Assuming 33MHz system bus speed for PIO modes; override with > > idebus=xx ieee1394: Initialized config rom entry `ip1394' > > ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 21 (level, low) -> IRQ 209 > > PCI: Setting latency timer of device 0000:00:1d.7 to 64 > > ehci_hcd 0000:00:1d.7: EHCI Host Controller > > ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 > > ehci_hcd 0000:00:1d.7: debug port 1 > > PCI: cache line size of 32 is not supported by device 0000:00:1d.7 > > ehci_hcd 0000:00:1d.7: irq 209, io mem 0x90445400 > > ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 > > usb usb2: configuration #1 chosen from 1 choice > > hub 2-0:1.0: USB hub found > > hub 2-0:1.0: 8 ports detected > > ICH7: IDE controller at PCI slot 0000:00:1f.1 > > ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 217 > > ICH7: chipset revision 2 > > ICH7: not 100% native mode: will probe irqs later > > ide0: BM-DMA at 0x20c0-0x20c7, BIOS settings: hda:DMA, hdb:pio > > ide1: BM-DMA at 0x20c8-0x20cf, BIOS settings: hdc:pio, hdd:pio > > Probing IDE interface ide0... > > hda: MATSHITADVD-R UJ-857, ATAPI CD/DVD-ROM drive > > usb 2-4: new high speed USB device using ehci_hcd and address 4 > > usb 2-4: configuration #1 chosen from 1 choice > > ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 > > Probing IDE interface ide1... > > usb 1-1: new low speed USB device using uhci_hcd and address 2 > > ACPI: PCI Interrupt 0000:03:03.0[A] -> GSI 19 (level, low) -> IRQ 225 > > ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[225] > > MMIO=[90000000-900007ff] Max Packet=[2048] IR/IT contexts=[8/8] > > SCSI subsystem initialized > > libata version 2.00 loaded. > > ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 225 > > PCI: Setting latency timer of device 0000:00:1d.1 to 64 > > uhci_hcd 0000:00:1d.1: UHCI Host Controller > > uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 > > uhci_hcd 0000:00:1d.1: irq 225, io base 0x00002080 > > usb usb3: configuration #1 chosen from 1 choice > > hub 3-0:1.0: USB hub found > > hub 3-0:1.0: 2 ports detected > > hda: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(66) > > Uniform CD-ROM driver Revision: 3.20 > > usb 1-1: configuration #1 chosen from 1 choice > > ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 217 > > PCI: Setting latency timer of device 0000:00:1d.2 to 64 > > uhci_hcd 0000:00:1d.2: UHCI Host Controller > > uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 > > uhci_hcd 0000:00:1d.2: irq 217, io base 0x00002060 > > usb usb4: configuration #1 chosen from 1 choice > > hub 4-0:1.0: USB hub found > > hub 4-0:1.0: 2 ports detected > > ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 177 > > PCI: Setting latency timer of device 0000:00:1d.3 to 64 > > uhci_hcd 0000:00:1d.3: UHCI Host Controller > > uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 > > uhci_hcd 0000:00:1d.3: irq 177, io base 0x00002040 > > usb usb5: configuration #1 chosen from 1 choice > > hub 5-0:1.0: USB hub found > > hub 5-0:1.0: 2 ports detected > > ata_piix 0000:00:1f.2: version 2.00 > > ata_piix 0000:00:1f.2: MAP [ P0 P2 XX XX ] > > ata_piix 0000:00:1f.2: invalid MAP value 0 > > usb 1-2: new full speed USB device using uhci_hcd and address 3 > > PCI: Enabling device 0000:00:1f.2 (0005 -> 0007) > > ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 225 > > PCI: Setting latency timer of device 0000:00:1f.2 to 64 > > ata1: SATA max UDMA/133 cmd 0x20D8 ctl 0x20FE bmdma 0x2020 irq 225 > > ata2: SATA max UDMA/133 cmd 0x20D0 ctl 0x20FA bmdma 0x2028 irq 225 > > scsi0 : ata_piix > > usb 1-2: configuration #1 chosen from 1 choice > > ATA: abnormal status 0x7F on port 0x20DF > > ATA: abnormal status 0x7F on port 0x20DF > > ata1.01: ATA-6, max UDMA/100, 156301488 sectors: LBA48 NCQ (depth 0/32) > > ata1.01: ata1: dev 1 multi count 16 > > ata1.01: configured for UDMA/100 > > scsi1 : ata_piix > > ATA: abnormal status 0x7F on port 0x20D7 > > Vendor: ATA Model: TOSHIBA MK8032GS Rev: AS11 > > Type: Direct-Access ANSI SCSI revision: 05 > > SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB) > > sda: Write Protect is off > > sda: Mode Sense: 00 3a 00 00 > > SCSI device sda: drive cache: write back > > SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB) > > sda: Write Protect is off > > sda: Mode Sense: 00 3a 00 00 > > SCSI device sda: drive cache: write back > > sda:<6>usb 4-2: new full speed USB device using uhci_hcd and address 2 > > sda1 sda2 sda3 > > sd 0:0:1:0: Attached scsi disk sda > > usb 4-2: configuration #1 chosen from 1 choice > > ieee1394: Host added: ID:BUS[0-00:1023] GUID[0017f2fffe59f52a] > > usb 5-1: new full speed USB device using uhci_hcd and address 2 > > usb 5-1: configuration #1 chosen from 1 choice > > usbcore: registered new driver hiddev > > input: Logitech USB-PS/2 Optical Mouse as /class/input/input0 > > input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on > > usb-0000:00:1d.0-1 > > input: Apple Computer Apple Internal Keyboard / Trackpad > > as /class/input/input1 > > input: USB HID v1.11 Keyboard [Apple Computer Apple Internal Keyboard / > > Trackpad] on usb-0000:00:1d.0-2 > > input: Apple Computer Apple Internal Keyboard / Trackpad > > as /class/input/input2 > > input: USB HID v1.11 Mouse [Apple Computer Apple Internal Keyboard / > > Trackpad] on usb-0000:00:1d.0-2 > > input: Apple Computer Apple Internal Keyboard / Trackpad > > as /class/input/input3 > > input: USB HID v1.11 Device [Apple Computer Apple Internal Keyboard / > > Trackpad] on usb-0000:00:1d.0-2 > > hiddev96: USB HID v1.11 Device [Apple Computer, Inc. IR Receiver] on > > usb-0000:00:1d.2-2 > > input: HID 05ac:1000 as /class/input/input4 > > input: USB HID v1.11 Keyboard [HID 05ac:1000] on usb-0000:00:1d.3-1 > > input: HID 05ac:1000 as /class/input/input5 > > input: USB HID v1.11 Mouse [HID 05ac:1000] on usb-0000:00:1d.3-1 > > usbcore: registered new driver usbhid > > drivers/usb/input/hid-core.c: v2.6:USB HID core driver > > Probing IDE interface ide1... > > EXT3-fs: INFO: recovery required on readonly filesystem. > > EXT3-fs: write access will be enabled during recovery. > > kjournald starting. Commit interval 5 seconds > > EXT3-fs: sda3: orphan cleanup on readonly fs > > ext3_orphan_cleanup: deleting unreferenced inode 3719207 > > ext3_orphan_cleanup: deleting unreferenced inode 3719202 > > ext3_orphan_cleanup: deleting unreferenced inode 3719200 > > ext3_orphan_cleanup: deleting unreferenced inode 3719189 > > ext3_orphan_cleanup: deleting unreferenced inode 3719188 > > EXT3-fs: sda3: 5 orphan inodes deleted > > EXT3-fs: recovery complete. > > EXT3-fs: mounted filesystem with ordered data mode. > > eth1394: eth0: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0) > > ts: Compaq touchscreen protocol output > > Linux agpgart interface v0.101 (c) Dave Jones > > Linux video capture interface: v2.00 > > ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 177 > > PCI: Setting latency timer of device 0000:01:00.0 to 64 > > sky2 v1.5 addr 0x90200000 irq 177 Yukon-EC (0xb6) rev 2 > > sky2 eth0: addr 00:17:f2:2a:1d:eb > > input: PC Speaker as /class/input/input6 > > Real Time Clock Driver v1.12ac > > agpgart: Detected an Intel 945GM Chipset. > > agpgart: Detected 16124K stolen memory. > > agpgart: AGP aperture is 256M @ 0x80000000 > > ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 225 > > intel_rng: FWH not detected > > ath_hal: module license 'Proprietary' taints kernel. > > ath_hal: 0.9.18.0 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, > > RF5413) uvcvideo: Found UVC 0.00 device <unnamed> (05ac:8300) > > uvcvideo: No valid video chain found. > > uvcvideo: Possible an Apple iSight without firmware loaded; please read > > the documentation, load the firmware and re-load the driver.<6>usbcore: > > registered new driver uvcvideo > > USB Video Class driver (v0.1.0-c) > > wlan: 0.8.4.2 (0.9.3) > > ath_pci: 0.9.4.5 (0.9.3) > > ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 169 > > PCI: Setting latency timer of device 0000:02:00.0 to 64 > > ath_rate_sample: 1.2 (0.9.3) > > wifi0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps > > wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps > > wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps > > 24Mbps 36Mbps 48Mbps 54Mbps > > wifi0: turboG rates: 6Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps > > wifi0: H/W encryption support: WEP AES AES_CCM TKIP > > wifi0: mac 10.3 phy 6.1 radio 10.2 > > wifi0: Use hw queue 1 for WME_AC_BE traffic > > wifi0: Use hw queue 0 for WME_AC_BK traffic > > wifi0: Use hw queue 2 for WME_AC_VI traffic > > wifi0: Use hw queue 3 for WME_AC_VO traffic > > wifi0: Use hw queue 8 for CAB traffic > > wifi0: Use hw queue 9 for beacons > > wifi0: Atheros 5424/2424: mem=0x90100000, irq=169 > > ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 50 > > PCI: Setting latency timer of device 0000:00:1b.0 to 64 > > hda_intel: azx_get_response timeout, switching to single_cmd mode... > > EXT3 FS on sda3, internal journal > > loop: loaded (max 8 devices) > > ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1) > > ieee1394: sbp2: Try serialize_io=0 for better performance > > fuse init (API version 7.7) > > device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: > > [EMAIL PROTECTED] > > hfs: write access to a jounaled filesystem is not supported, use the > > force option at your own risk, mounting read-only. > > Adding 3145720k swap on /swapfile. Priority:-1 extents:1143 > > across:56673548k NET: Registered protocol family 10 > > lo: Disabled Privacy Extensions > > IPv6 over IPv4 tunneling driver > > sky2 eth0: enabling interface > > ADDRCONF(NETDEV_UP): eth0: link is not ready > > dummy0: no IPv6 routers present > > ip_tables: (C) 2000-2006 Netfilter Core Team > > Netfilter messages via NETLINK v0.30. > > ip_conntrack version 2.4 (8192 buckets, 65536 max) - 228 bytes per > > conntrack ClusterIP Version 0.8 loaded successfully > > Bridge firewalling registered > > ip6_tables: (C) 2000-2006 Netfilter Core Team > > ACPI: Battery Slot [BAT0] (battery present) > > ACPI: AC Adapter [ADP1] (off-line) > > ACPI: Power Button (FF) [PWRF] > > ACPI: Lid Switch [LID0] > > ACPI: Power Button (CM) [PWRB] > > ACPI: Sleep Button (CM) [SLPB] > > lp: driver loaded but no devices found > > ppdev: user-space parallel port driver > > Bluetooth: Core ver 2.10 > > NET: Registered protocol family 31 > > Bluetooth: HCI device and connection manager initialized > > Bluetooth: HCI socket layer initialized > > Bluetooth: L2CAP ver 2.8 > > Bluetooth: L2CAP socket layer initialized > > usb 5-1: usbfs: USBDEVFS_CONTROL failed cmd hid2hci rqt 64 rq 0 len 0 ret > > -84 Bluetooth: RFCOMM socket layer initialized > > Bluetooth: RFCOMM TTY layer initialized > > Bluetooth: RFCOMM ver 1.8 > > cpufreq-core: trying to register driver centrino > > cpufreq-core: adding CPU 0 > > speedstep-centrino: adding state 0 with frequency 2000000 and control > > value 0c2c > > speedstep-centrino: adding state 1 with frequency 1833000 and control > > value 0b28 > > speedstep-centrino: adding state 2 with frequency 1667000 and control > > value 0a24 > > speedstep-centrino: adding state 3 with frequency 1500000 and control > > value 0920 > > speedstep-centrino: adding state 4 with frequency 1333000 and control > > value 081c > > speedstep-centrino: adding state 5 with frequency 1000000 and control > > value 0613 > > speedstep-centrino: centrino_cpu_init: cur=0kHz > > freq-table: table entry 0: 2000000 kHz, 3116 index > > freq-table: table entry 1: 1833000 kHz, 2856 index > > freq-table: table entry 2: 1667000 kHz, 2596 index > > freq-table: table entry 3: 1500000 kHz, 2336 index > > freq-table: table entry 4: 1333000 kHz, 2076 index > > freq-table: table entry 5: 1000000 kHz, 1555 index > > freq-table: setting show_table for cpu 0 to f6a0be40 > > cpufreq-core: setting new policy for CPU 0: 1000000 - 2000000 kHz > > freq-table: request for verification of policy (1000000 - 2000000 kHz) > > for cpu 0 > > freq-table: verification lead to (1000000 - 2000000 kHz) for cpu 0 > > freq-table: request for verification of policy (1000000 - 2000000 kHz) > > for cpu 0 > > freq-table: verification lead to (1000000 - 2000000 kHz) for cpu 0 > > cpufreq-core: new min and max freqs are 1000000 - 2000000 kHz > > cpufreq-core: governor switch > > cpufreq-core: __cpufreq_governor for CPU 0, event 1 > > performance: setting to 2000000 kHz because of event 1 > > cpufreq-core: target for CPU 0: 2000000 kHz, relation 1 > > freq-table: request for target 2000000 kHz (relation: 1) for cpu 0 > > freq-table: target is 0 (2000000 kHz, 3116) > > speedstep-centrino: couldn't limit to CPUs in this domain > > cpufreq-core: governor: change or update limits > > cpufreq-core: __cpufreq_governor for CPU 0, event 3 > > performance: setting to 2000000 kHz because of event 3 > > cpufreq-core: target for CPU 0: 2000000 kHz, relation 1 > > freq-table: request for target 2000000 kHz (relation: 1) for cpu 0 > > freq-table: target is 0 (2000000 kHz, 3116) > > speedstep-centrino: couldn't limit to CPUs in this domain > > cpufreq-core: initialization complete > > cpufreq-core: adding CPU 1 > > speedstep-centrino: adding state 0 with frequency 2000000 and control > > value 0c2c > > speedstep-centrino: adding state 1 with frequency 1833000 and control > > value 0b28 > > speedstep-centrino: adding state 2 with frequency 1667000 and control > > value 0a24 > > speedstep-centrino: adding state 3 with frequency 1500000 and control > > value 0920 > > speedstep-centrino: adding state 4 with frequency 1333000 and control > > value 081c > > speedstep-centrino: adding state 5 with frequency 1000000 and control > > value 0613 > > speedstep-centrino: centrino_cpu_init: cur=0kHz > > freq-table: table entry 0: 2000000 kHz, 3116 index > > freq-table: table entry 1: 1833000 kHz, 2856 index > > freq-table: table entry 2: 1667000 kHz, 2596 index > > freq-table: table entry 3: 1500000 kHz, 2336 index > > freq-table: table entry 4: 1333000 kHz, 2076 index > > freq-table: table entry 5: 1000000 kHz, 1555 index > > freq-table: setting show_table for cpu 1 to f6536840 > > cpufreq-core: setting new policy for CPU 1: 1000000 - 2000000 kHz > > freq-table: request for verification of policy (1000000 - 2000000 kHz) > > for cpu 1 > > freq-table: verification lead to (1000000 - 2000000 kHz) for cpu 1 > > freq-table: request for verification of policy (1000000 - 2000000 kHz) > > for cpu 1 > > freq-table: verification lead to (1000000 - 2000000 kHz) for cpu 1 > > cpufreq-core: new min and max freqs are 1000000 - 2000000 kHz > > cpufreq-core: governor switch > > cpufreq-core: __cpufreq_governor for CPU 1, event 1 > > performance: setting to 2000000 kHz because of event 1 > > cpufreq-core: target for CPU 1: 2000000 kHz, relation 1 > > freq-table: request for target 2000000 kHz (relation: 1) for cpu 1 > > freq-table: target is 0 (2000000 kHz, 3116) > > speedstep-centrino: couldn't limit to CPUs in this domain > > cpufreq-core: governor: change or update limits > > cpufreq-core: __cpufreq_governor for CPU 1, event 3 > > performance: setting to 2000000 kHz because of event 3 > > cpufreq-core: target for CPU 1: 2000000 kHz, relation 1 > > freq-table: request for target 2000000 kHz (relation: 1) for cpu 1 > > freq-table: target is 0 (2000000 kHz, 3116) > > speedstep-centrino: couldn't limit to CPUs in this domain > > cpufreq-core: initialization complete > > cpufreq-core: driver centrino up and running > > usb 5-1: USB disconnect, address 2 > > usb 5-1: new full speed USB device using uhci_hcd and address 3 > > usb 5-1: configuration #1 chosen from 1 choice > > cpufreq-core: setting new policy for CPU 0: 1000000 - 2000000 kHz > > freq-table: request for verification of policy (1000000 - 2000000 kHz) > > for cpu 0 > > freq-table: verification lead to (1000000 - 2000000 kHz) for cpu 0 > > freq-table: request for verification of policy (1000000 - 2000000 kHz) > > for cpu 0 > > freq-table: verification lead to (1000000 - 2000000 kHz) for cpu 0 > > cpufreq-core: new min and max freqs are 1000000 - 2000000 kHz > > cpufreq-core: governor switch > > cpufreq-core: __cpufreq_governor for CPU 0, event 2 > > cpufreq-core: __cpufreq_governor for CPU 0, event 1 > > cpufreq-core: starting governor ondemand failed > > cpufreq-core: __cpufreq_governor for CPU 0, event 1 > > performance: setting to 2000000 kHz because of event 1 > > cpufreq-core: target for CPU 0: 2000000 kHz, relation 1 > > freq-table: request for target 2000000 kHz (relation: 1) for cpu 0 > > freq-table: target is 0 (2000000 kHz, 3116) > > speedstep-centrino: couldn't limit to CPUs in this domain > > cpufreq-core: setting new policy for CPU 0: 1000000 - 2000000 kHz > > freq-table: request for verification of policy (1000000 - 2000000 kHz) > > for cpu 0 > > freq-table: verification lead to (1000000 - 2000000 kHz) for cpu 0 > > freq-table: request for verification of policy (1000000 - 2000000 kHz) > > for cpu 0 > > freq-table: verification lead to (1000000 - 2000000 kHz) for cpu 0 > > cpufreq-core: new min and max freqs are 1000000 - 2000000 kHz > > cpufreq-core: governor switch > > cpufreq-core: __cpufreq_governor for CPU 0, event 2 > > cpufreq-core: __cpufreq_governor for CPU 0, event 1 > > ------------[ cut here ]------------ > > kernel BUG at drivers/cpufreq/cpufreq_userspace.c:138! > > invalid opcode: 0000 [#1] > > SMP > > Modules linked in: cpufreq_ondemand cpufreq_userspace cpufreq_powersave > > speedstep_centrino freq_table rfcomm l2cap bluetooth ppdev parport_pc lp > > parport button ac battery xt_mac xt_tcpudp ip6table_filter ip6_tables > > xt_state xt_pkttype iptable_raw xt_CLASSIFY xt_CONNMARK xt_MARK xt_length > > xt_connmark xt_physdev bridge xt_policy xt_multiport xt_conntrack > > iptable_mangle ipt_ULOG ipt_TTL ipt_ttl ipt_TOS ipt_tos ipt_TCPMSS > > ipt_SAME ipt_REJECT ipt_REDIRECT ipt_recent ipt_owner ipt_NETMAP > > ipt_MASQUERADE ipt_LOG ipt_iprange ipt_hashlimit ipt_ECN ipt_ecn ipt_DSCP > > ipt_dscp ipt_CLUSTERIP ipt_ah ipt_addrtype ip_nat_irc ip_nat_tftp > > ip_nat_ftp ip_conntrack_irc ip_conntrack_tftp ip_conntrack_ftp > > iptable_nat ip_nat ip_conntrack nfnetlink iptable_filter ip_tables > > x_tables dummy ipv6 nls_utf8 hfsplus dm_snapshot dm_mirror dm_mod fuse > > sbp2 loop snd_hda_intel snd_hda_codec snd_pcm_oss snd_mixer_oss snd_pcm > > wlan_scan_sta snd_timer ath_rate_sample snd ath_pci wlan uvcvideo ath_hal > > i2c_i801 intel_agp rtc pcspkr sky2 videodev v4l1_compat v4l2_common > > i2c_core soundcore agpgart snd_page_alloc tsdev evdev eth1394 ext3 jbd > > mbcache ide_generic sd_mod usbhid ide_cd cdrom ata_piix libata scsi_mod > > ohci1394 ieee1394 generic piix ide_core ehci_hcd uhci_hcd usbcore thermal > > processor fan > > CPU: 1, VCPU: 0.0 > > EIP: 0060:[<f929106a>] Tainted: P VLI > > EFLAGS: 00010246 (2.6.18+openvz #3) > > EIP is at cpufreq_governor_userspace+0x3e/0x1c2 [cpufreq_userspace] > > eax: ffffffff ebx: 00000000 ecx: ffffffea edx: 00000000 > > esi: f6458880 edi: ffffffea ebp: f6458880 esp: f610de18 > > ds: 007b es: 007b ss: 0068 > > Process powersaved (pid: 13108, veid: 0, ti=f610c000 task=f6178700 > > task.ti=f610c000) > > Stack: f6458880 00000001 c0215c2e 00000001 c02a9b66 c02a9bcd 00000000 > > 00000001 f610de60 00000000 c02e0920 c0215ddf f9291f40 f64588ac f6458880 > > f610df2c c0215fdf 0000000a 00000001 00000002 00000000 001e8480 000f4240 > > 00002710 Call Trace: > > [<c0215c2e>] __cpufreq_governor+0x54/0xd1 > > [<c0215ddf>] __cpufreq_set_policy+0x134/0x197 > > [<c0215fdf>] store_scaling_governor+0x13e/0x17d > > [<c02164c3>] handle_update+0x0/0x20 > > [<c01b0065>] cfq_kick_queue+0x7c/0x80 > > [<c0215ea1>] store_scaling_governor+0x0/0x17d > > [<c0215666>] store+0x2e/0x3e > > [<c01970c1>] sysfs_write_file+0x91/0xb9 > > [<c0197030>] sysfs_write_file+0x0/0xb9 > > [<c016107b>] vfs_write+0x83/0x125 > > [<c01616c7>] sys_write+0x3c/0x9e > > [<c0102987>] syscall_call+0x7/0xb > > Code: 0f 84 1e 01 00 00 31 c9 4a 0f 85 9b 01 00 00 0f a3 1d 10 96 31 c0 > > 19 c0 b9 ea ff ff ff 85 c0 0f 84 85 01 00 00 83 7e 20 00 75 0b <0f> 0b 66 > > b8 8a 00 b8 f8 12 29 f9 b8 60 1f 29 f9 e8 e6 e5 fe c6 > > EIP: [<f929106a>] cpufreq_governor_userspace+0x3e/0x1c2 > > [cpufreq_userspace] SS:ESP 0068:f610de18 > > Bluetooth: HCI USB driver ver 2.9 > > usbcore: registered new driver hci_usb > > [drm] Initialized drm 1.0.1 20051102 > > ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 177 > > [drm] Initialized i915 1.5.0 20060119 on minor 0 > > > > > > -- --
