Package: installation-reports INSTALL REPORT
Debian-installer-version: http://cdimage.debian.org/pub/cdimage-testing/daily/sparc/rc3/ dated 23-MAR-2005 uname -a: did not get that far Date: 2005-03-27 16:00 CEST Method: businesscard iso, normal console, typing 'linux debconf/priority=medium' at the SILO prompt Machine: Sun Ultra5 Processor: 270 MHz Memory: 64 MByyte Root Device: /dev/hda Root Size/partition table: Disk /dev/hda (Sun disk label): 16 heads, 63 sectors, 12009 cylinders Units = cylinders of 1008 * 512 bytes Device Flag Start End Blocks Id System /dev/hda1 0 194 97776 1 Boot /dev/hda2 194 13757 6835752 83 Linux native (old Woody) /dev/hda3 0 77545 39082680 5 Whole disk /dev/hda4 13757 14261 254016 82 Linux swap /dev/hda5 14261 16199 976752 83 Linux native (unused) /dev/hda6 16199 35575 9765504 1 Boot (Sarge) Output of lspci (from last time's install): 0000:00:00.0 Host bridge: Sun Microsystems Computer Corp. Ultra IIi 0000:00:01.0 PCI bridge: Sun Microsystems Computer Corp. Simba Advanced PCI Bridge (rev 11) 0000:00:01.1 PCI bridge: Sun Microsystems Computer Corp. Simba Advanced PCI Bridge (rev 11) 0000:01:01.0 Bridge: Sun Microsystems Computer Corp. EBUS (rev 01) 0000:01:01.1 Ethernet controller: Sun Microsystems Computer Corp. Happy Meal (rev 01) 0000:01:02.0 VGA compatible controller: ATI Technologies Inc 3D Rage I/II 215GT [Mach64 GT] (rev 9a) 0000:01:03.0 IDE interface: Silicon Image, Inc. (formerly CMD Technology Inc) PCI0646 (rev 03) Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot worked: [O] Configure network HW: [O] Config network: [O] Detect CD: [O] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Create file systems: [O] Mount partitions: [O] Install base system: [O] Install boot loader: [O] Reboot: [O] Comments/Problems: while the first stage went very smooth, after reboot the keyboard mapping was so wrong that I was unable to continue. I have a SUN 5c keyboard, german layout. regards Herbert -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
