The gimpprint Epson C62 driver (and also every Stylus Cx driver) print always less than half pages printedIs this just the last page, or all pages in a job? e.g., if you print 4 pages of a document, which pages are affected?
All pages. On the first page is printed only a quarter of the entire document then it stops, eject the paper and start to take one page at a time, printing only one line per page, and then i had to turn off the printer, cancelling the job and turn it on again.
Is the first half of the page printed properly, or are there quality problems?
The quality of the print is fine. The colors are ok.
Which model of Epson Stylus do you own? You must use the exact driver for your model.
I had an Epson Stylus C62 and i use the "EPSON Stylus C62 - CUPS+Gimp-Print v4.2.7 (en)" driver.
Are you connecting via a USB or parallel connection?
I'm connecting via USB.
Please could you attach your /etc/cups/printers.conf? I need to check which CUPS backend you are using (parallel/epson/usb/serial etc.). If you are using the "epson" backend (Device URI epson:/...), please try the usb or parallel backend instead.
This is the file :
# Printer configuration file for CUPS v1.1.23 # Written by cupsd on Thu Mar 10 22:13:24 2005 <DefaultPrinter EPSONC62> Info Epson Stylus C62 Location DeviceURI usb://EPSON/Stylus%20C62 State Idle Accepting Yes JobSheets none none QuotaPeriod 0 PageLimit 0 KLimit 0 </Printer>
Like you see, i use the usb cups backend.
Thats all.
Thanks for your help.
-- RaSca [EMAIL PROTECTED] http://web.tiscali.it/rascasoft
-- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
