Package: installation-reports
INSTALL REPORT
Debian-installer-version: downloaded and burned to CD late April or
early May 2006 (sorry, don't remember dates or which mirror was used)
uname -a: 2.6.8-2-686 #1 Tue Aug 16 13:22:48 UTC 2005 i686 GNU/Linux
Date: May 29 2006 1700 UTC
Method: booted & installed from CD (#'s 1, 2, 3, & 14)
Machine: Dell Dimension 4400
Processor: Pentium(R) 4 CPU 1.6G/256K
Memory: 512 M
Root Device: PATA Seagate "Barracuda ATA" IV 40G
Root Size/partition table: 12G, ext3
Output of lspci:
0000:00:00.0 Host bridge: Intel Corp. 82845 845 (Brookdale) Chipset
Host Bridge (rev 04)
0000:00:01.0 PCI bridge: Intel Corp. 82845 845 (Brookdale) Chipset AGP
Bridge (rev 04)
0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev 05)
0000:00:1f.0 ISA bridge: Intel Corp. 82801BA ISA Bridge (LPC) (rev 05)
0000:00:1f.1 IDE interface: Intel Corp. 82801BA IDE U100 (rev 05)
0000:00:1f.2 USB Controller: Intel Corp. 82801BA/BAM USB (Hub #1) (rev
05)
0000:00:1f.3 SMBus: Intel Corp. 82801BA/BAM SMBus (rev 05)
0000:00:1f.4 USB Controller: Intel Corp. 82801BA/BAM USB (Hub #2) (rev
05)
0000:01:00.0 VGA compatible controller: nVidia Corporation NV11
[GeForce2 MX/MX 400] (rev b2)
0000:02:09.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro
100] (rev 08)
0000:02:0a.0 Communication controller: Conexant HCF 56k Data/Fax Modem
(rev 08)
0000:02:0b.0 Multimedia audio controller: Cirrus Logic CS 4614/22/24
[CrystalClear SoundFusion Audio Accelerator] (rev 01)
and lspci -n:
0000:00:00.0 0600: 8086:1a30 (rev 04)
0000:00:01.0 0604: 8086:1a31 (rev 04)
0000:00:1e.0 0604: 8086:244e (rev 05)
0000:00:1f.0 0601: 8086:2440 (rev 05)
0000:00:1f.1 0101: 8086:244b (rev 05)
0000:00:1f.2 0c03: 8086:2442 (rev 05)
0000:00:1f.3 0c05: 8086:2443 (rev 05)
0000:00:1f.4 0c03: 8086:2444 (rev 05)
0000:01:00.0 0300: 10de:0110 (rev b2)
0000:02:09.0 0200: 8086:1229 (rev 08)
0000:02:0a.0 0780: 14f1:1033 (rev 08)
0000:02:0b.0 0401: 1013:6003 (rev 01)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [O]
Comments/Problems: No problems. Between SANE, HP3900 scanner wrapper,
PWC, kpilot, and ndiswrapper, all my hardware is supported and
functional! Gpilot doesn't get along with my Palm but that's OK
because Kpilot works and I didn't want to use Evolution anyway.
Now that I'm in practice (I'm still a Linux n00b but this is my third
attempted installation in a month), installation & configuration took
less than a day. While this is a dual-boot setup at least while I
figure out if I can use a Windoze emulator to run my MS Flight
Simulator, I have no doubt Linux and Debian now will be my primary OS--
looks like you have a convert to the cause!
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
