I am also experiencing this problem.  I'm using ipw2100.

Below is wpa_supplicant's debugging output as it tries to associate with a 
WEP-enabled AP ('izanagi' in this case):

Script started on Thu 24 Feb 2005 01:28:35 PM MST
[EMAIL PROTECTED]:~# wpa_supplicant -D ipw -i eth1 -dd 
-c /etc/wpa_supplicant.conf

Initializing interface 'eth1' conf '/etc/wpa_supplicant.conf' driver 'ipw'
Configuration file '/etc/wpa_supplicant.conf' -> '/etc/wpa_supplicant.conf'
Reading configuration file '/etc/wpa_supplicant.conf'
ctrl_interface='/var/run/wpa_supplicant'
ctrl_interface_group=0
eapol_version=1
ap_scan=1
fast_reauth=1
Line: 35 - start of a new network block
ssid - hexdump_ascii(len=8):
     76 61 6c 68 61 6c 6c 61                           valhalla        
priority=9 (0x9)
proto: 0x1
key_mgmt: 0x2
mode=0 (0x0)
group: 0xc
PSK - hexdump(len=32): [REMOVED]
Line: 56 - start of a new network block
ssid - hexdump_ascii(len=7):
     69 7a 61 6e 61 67 69                              izanagi         
key_mgmt: 0x4
wep_key0 - hexdump(len=13): [REMOVED]
wep_tx_keyidx=0 (0x0)
priority=8 (0x8)
auth_alg: 0x1
Line: 66 - start of a new network block
ssid - hexdump_ascii(len=6):
     6d 61 6e 63 61 70                                 mancap          
key_mgmt: 0x4
wep_key0 - hexdump(len=13): [REMOVED]
wep_tx_keyidx=0 (0x0)
priority=8 (0x8)
auth_alg: 0x2
Line: 76 - start of a new network block
ssid - hexdump_ascii(len=7):
     6d 61 6e 63 61 70 32                              mancap2         
key_mgmt: 0x4
wep_key0 - hexdump(len=13): [REMOVED]
wep_tx_keyidx=0 (0x0)
priority=8 (0x8)
Line: 86 - start of a new network block
ssid - hexdump_ascii(len=7):
     64 65 66 61 75 6c 74                              default         
key_mgmt: 0x4
priority=1 (0x1)
Priority group 9
   id=0 ssid='valhalla'
Priority group 8
   id=1 ssid='izanagi'
   id=2 ssid='mancap'
   id=3 ssid='mancap2'
Priority group 1
   id=4 ssid='default'
Initializing interface (2) 'eth1'
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: KEY_RX entering state NO_KEY_RECEIVE
EAPOL: SUPP_BE entering state INITIALIZE
EAP: EAP entering state DISABLED
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
wpa_driver_ipw_init is called
Own MAC address: 00:0c:f1:3c:73:3c
wpa_driver_ipw_set_wpa: enabled=1
wpa_driver_ipw_set_key: alg=none key_idx=0 set_tx=0 seq_len=0 key_len=0
wpa_driver_ipw_set_key: alg=none key_idx=1 set_tx=0 seq_len=0 key_len=0
wpa_driver_ipw_set_key: alg=none key_idx=2 set_tx=0 seq_len=0 key_len=0
wpa_driver_ipw_set_key: alg=none key_idx=3 set_tx=0 seq_len=0 key_len=0
wpa_driver_ipw_set_countermeasures: enabled=0
wpa_driver_ipw_set_drop_unencrypted: enabled=1
Setting scan request: 0 sec 100000 usec
Wireless event: cmd=0x8b06 len=8
RTM_NEWLINK, IFLA_IFNAME: Interface 'eth1' added
RTM_NEWLINK, IFLA_IFNAME: Interface 'eth1' added
Starting AP scan (broadcast SSID)
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=0 idleWhile=0
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=0 idleWhile=0
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=0 idleWhile=0
Scan timeout - try to get results
Received 409 bytes of scan results (2 BSSes)
Scan results: 2
Selecting BSS from priority group 9
0: 00:0c:41:12:35:88 ssid='izanagi' wpa_ie_len=0 rsn_ie_len=0
   skip - no WPA/RSN IE
1: 00:0c:41:b3:45:51 ssid='perry' wpa_ie_len=0 rsn_ie_len=0
   skip - no WPA/RSN IE
Selecting BSS from priority group 8
0: 00:0c:41:12:35:88 ssid='izanagi' wpa_ie_len=0 rsn_ie_len=0
   skip - no WPA/RSN IE
1: 00:0c:41:b3:45:51 ssid='perry' wpa_ie_len=0 rsn_ie_len=0
   skip - no WPA/RSN IE
   selected non-WPA AP 00:0c:41:12:35:88 ssid='izanagi'
Trying to associate with 00:0c:41:12:35:88 (SSID='izanagi' freq=0 MHz)
Cancelling scan request
Automatic auth_alg selection: 0x1
Overriding auth_alg selection: 0x1
wpa_driver_ipw_set_auth_alg: auth_alg=0x1
No keys have been configured - skip key clearing
wpa_driver_ipw_set_key: alg=WEP key_idx=0 set_tx=1 seq_len=0 key_len=13
wpa_driver_ipw_set_drop_unencrypted: enabled=1
wpa_driver_ipw_set_wpa: enabled=0
ioctl[IPW_IOCTL_WPA_SUPPLICANT]: Operation not supported
Setting authentication timeout: 5 sec 0 usec
EAPOL: External notification - portControl=ForceAuthorized
Wireless event: cmd=0x8b1a len=20
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=0 idleWhile=0
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=0 idleWhile=0
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=0 idleWhile=0
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=0 idleWhile=0
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=0 idleWhile=0
Authentication with 00:00:00:00:00:00 timed out.
Added BSSID 00:00:00:00:00:00 into blacklist
wpa_driver_ipw_set_key: alg=none key_idx=0 set_tx=0 seq_len=0 key_len=0
wpa_driver_ipw_set_key: alg=none key_idx=1 set_tx=0 seq_len=0 key_len=0
wpa_driver_ipw_set_key: alg=none key_idx=2 set_tx=0 seq_len=0 key_len=0
wpa_driver_ipw_set_key: alg=none key_idx=3 set_tx=0 seq_len=0 key_len=0
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
Setting scan request: 0 sec 0 usec
Script done on Thu 24 Feb 2005 01:29:03 PM MST


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Reply via email to