Package: installation-reports
Boot method: daily build netinstall cd
Image version: debian-testing-i386-netinst.iso
Date: 8 February 2006 around 1600 EST
Machine: Dell Inspiron 6000
Processor: Centrino (unsure of speed)
Memory: 512MB
Partitions:
Filesystem Type 1K-blocks Used Available Use% Mounted on
/dev/hda2 ext3 19228308 1972532 16279024 11% /
tmpfs tmpfs 258124 0 258124 0% /dev/shm
Output of lspci and lspci -n:
beauty:~# lspci
0000:00:00.0 Host bridge: Intel Corp. Mobile Memory Controller Hub (rev 03)
0000:00:01.0 PCI bridge: Intel Corp. Mobile Memory Controller Hub PCI
Express Port (rev 03)
0000:00:1d.0 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6
Family) USB UHCI #1 (rev 03)
0000:00:1d.1 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6
Family) USB UHCI #2 (rev 03)
0000:00:1d.2 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6
Family) USB UHCI #3 (rev 03)
0000:00:1d.3 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6
Family) USB UHCI #4 (rev 03)
0000:00:1d.7 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6
Family) USB2 EHCI Controller (rev 03)
0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev d3)
0000:00:1e.2 Multimedia audio controller: Intel Corp.
82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller (rev 03)
0000:00:1e.3 Modem: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family)
AC'97 Modem Controller (rev 03)
0000:00:1f.0 ISA bridge: Intel Corp. 82801FBM (ICH6M) LPC Interface
Bridge (rev 03)
0000:00:1f.2 IDE interface: Intel Corp. 82801FBM (ICH6M) SATA
Controller (rev 03)
0000:01:00.0 VGA compatible controller: ATI Technologies Inc: Unknown
device 5460
0000:03:00.0 Ethernet controller: Broadcom Corporation BCM4401-B0
100Base-TX (rev 02)
0000:03:01.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev b3)
0000:03:01.1 FireWire (IEEE 1394): Ricoh Co Ltd R5C552 IEEE 1394
Controller (rev 08)
0000:03:01.2 0805: Ricoh Co Ltd: Unknown device 0822 (rev 17)
0000:03:03.0 Network controller: Intel Corp. PRO/Wireless 2200BG (rev 05)
beauty:~# lspci -n
0000:00:00.0 0600: 8086:2590 (rev 03)
0000:00:01.0 0604: 8086:2591 (rev 03)
0000:00:1d.0 0c03: 8086:2658 (rev 03)
0000:00:1d.1 0c03: 8086:2659 (rev 03)
0000:00:1d.2 0c03: 8086:265a (rev 03)
0000:00:1d.3 0c03: 8086:265b (rev 03)
0000:00:1d.7 0c03: 8086:265c (rev 03)
0000:00:1e.0 0604: 8086:2448 (rev d3)
0000:00:1e.2 0401: 8086:266e (rev 03)
0000:00:1e.3 0703: 8086:266d (rev 03)
0000:00:1f.0 0601: 8086:2641 (rev 03)
0000:00:1f.2 0101: 8086:2653 (rev 03)
0000:01:00.0 0300: 1002:5460
0000:03:00.0 0200: 14e4:170c (rev 02)
0000:03:01.0 0607: 1180:0476 (rev b3)
0000:03:01.1 0c00: 1180:0552 (rev 08)
0000:03:01.2 0805: 1180:0822 (rev 17)
0000:03:03.0 0280: 8086:4220 (rev 05)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [o ]
Configure network HW: [ o]
Config network: [o ]
Detect CD: [o ]
Load installer modules: [ o]
Detect hard drives: [E ]
Partition hard drives: [ ]
Create file systems: [ ]
Mount partitions: [ ]
Install base system: [ ]
Install boot loader: [ ]
Reboot: [ ]
Comments/Problems:
Tried to install using the netinstall disk from the testing page, per recomendation from the response to bug#35194. Only got as far as mounting the cd-rom. The disk said there were no drivers for the cd rom. I tried every driver on the list and got the same error. The cd rom is a Philips cdrw/dvd scb5265.
Stephanie
