Package: src:linux
Version: 3.13.7-1~bpo70+1
Severity: critical
Justification: breaks the whole system
Dear Maintainer,
*** Please consider answering these questions, where appropriate ***
* What led up to the situation?
* What exactly did you do (or not do) that was effective (or
ineffective)?
* What was the outcome of this action?
* What outcome did you expect instead?
*** End of the template - remove these lines ***
-- Package-specific info:
** Version:
Linux version 3.13-0.bpo.1-amd64 (debian-ker...@lists.debian.org) (gcc version
4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.13.7-1~bpo70+1 (2014-03-29)
** Command line:
BOOT_IMAGE=/vmlinuz-3.13-0.bpo.1-amd64 root=/dev/mapper/basecamp-root_crypt ro
ipv6.disable=1 quiet
** Not tainted
** Kernel log:
[ 1.991515] md/raid1:md0: active with 2 out of 2 mirrors
[ 1.991528] md0: detected capacity change from 0 to 254607360
[ 1.991542] RAID1 conf printout:
[ 1.991545] --- wd:2 rd:2
[ 1.991547] disk 0, wo:0, o:1, dev:sdb1
[ 1.991548] disk 1, wo:0, o:1, dev:sda1
[ 1.995610] md0: unknown partition table
[ 1.998285] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 2.130697] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[ 2.130700] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.131076] hub 2-1:1.0: USB hub found
[ 2.131160] hub 2-1:1.0: 6 ports detected
[ 2.194098] md: md1 stopped.
[ 2.194747] md: bind<sda2>
[ 2.194871] md: bind<sdb2>
[ 2.196229] md/raid1:md1: active with 1 out of 2 mirrors
[ 2.196265] md1: detected capacity change from 0 to 999813873664
[ 2.196283] RAID1 conf printout:
[ 2.196286] --- wd:1 rd:2
[ 2.196288] disk 0, wo:1, o:1, dev:sdb2
[ 2.196304] disk 1, wo:0, o:1, dev:sda2
[ 2.196305] RAID1 conf printout:
[ 2.196305] --- wd:1 rd:2
[ 2.196306] disk 0, wo:1, o:1, dev:sdb2
[ 2.196307] disk 1, wo:0, o:1, dev:sda2
[ 2.196307] RAID1 conf printout:
[ 2.196308] --- wd:1 rd:2
[ 2.196308] disk 0, wo:1, o:1, dev:sdb2
[ 2.196309] disk 1, wo:0, o:1, dev:sda2
[ 2.202390] usb 1-1.1: new full-speed USB device number 3 using ehci-pci
[ 2.221311] md1: unknown partition table
[ 2.296037] usb 1-1.1: New USB device found, idVendor=046b, idProduct=ff10
[ 2.296041] usb 1-1.1: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 2.296043] usb 1-1.1: Product: Virtual Keyboard and Mouse
[ 2.296045] usb 1-1.1: Manufacturer: American Megatrends Inc.
[ 2.296046] usb 1-1.1: SerialNumber: serial
[ 2.298915] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.300802] usbcore: registered new interface driver usbhid
[ 2.300804] usbhid: USB HID core driver
[ 2.302120] input: American Megatrends Inc. Virtual Keyboard and Mouse as
/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input0
[ 2.302171] hid-generic 0003:046B:FF10.0001: input,hidraw0: USB HID v1.10
Keyboard [American Megatrends Inc. Virtual Keyboard and Mouse] on
usb-0000:00:1a.0-1.1/input0
[ 2.302288] input: American Megatrends Inc. Virtual Keyboard and Mouse as
/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.1/input/input1
[ 2.302363] hid-generic 0003:046B:FF10.0002: input,hidraw1: USB HID v1.10
Mouse [American Megatrends Inc. Virtual Keyboard and Mouse] on
usb-0000:00:1a.0-1.1/input1
[ 2.400396] device-mapper: uevent: version 1.0.3
[ 2.400469] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised:
dm-de...@redhat.com
[ 2.402903] random: lvm urandom read with 61 bits of entropy available
[ 2.434862] bio: create slab <bio-1> at 1
[ 2.534379] Switched to clocksource tsc
[ 5.812288] random: nonblocking pool is initialized
[ 13.692537] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts:
(null)
[ 14.931642] udevd[539]: starting version 175
[ 15.096587] input: Sleep Button as
/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[ 15.096593] ACPI: Sleep Button [SLPB]
[ 15.096625] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 15.096626] ACPI: Power Button [PWRF]
[ 15.188977] ACPI Warning: 0x0000000000004000-0x000000000000401f SystemIO
conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20131115/utaddress-251)
[ 15.188982] ACPI: If an ACPI driver is available for this device, you should
use it instead of the native driver
[ 15.351019] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO
conflicts with Region \PMIO 1 (20131115/utaddress-251)
[ 15.351024] ACPI: If an ACPI driver is available for this device, you should
use it instead of the native driver
[ 15.351027] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO
conflicts with Region \GPIO 1 (20131115/utaddress-251)
[ 15.351038] ACPI: If an ACPI driver is available for this device, you should
use it instead of the native driver
[ 15.351039] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO
conflicts with Region \GPIO 1 (20131115/utaddress-251)
[ 15.351040] ACPI: If an ACPI driver is available for this device, you should
use it instead of the native driver
[ 15.351041] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO
conflicts with Region \GPIO 1 (20131115/utaddress-251)
[ 15.351042] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO
conflicts with Region \_SI_.SIOR 2 (20131115/utaddress-251)
[ 15.351044] ACPI: If an ACPI driver is available for this device, you should
use it instead of the native driver
[ 15.351045] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 15.396015] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 15.426440] iTCO_vendor_support: vendor-support=0
[ 15.426808] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[ 15.426829] iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by
hardware/BIOS
[ 15.666911] intel_rapl: domain uncore energy ctr 0:0 not working, skip
[ 16.255607] EXT4-fs (dm-2): re-mounted. Opts: (null)
[ 16.526714] RAID1 conf printout:
[ 16.526718] --- wd:1 rd:2
[ 16.526720] disk 0, wo:1, o:1, dev:sdb2
[ 16.526722] disk 1, wo:0, o:1, dev:sda2
[ 16.526723] RAID1 conf printout:
[ 16.526724] --- wd:1 rd:2
[ 16.526725] disk 0, wo:1, o:1, dev:sdb2
[ 16.526727] disk 1, wo:0, o:1, dev:sda2
[ 16.526892] md: recovery of RAID array md1
[ 16.526905] md: minimum _guaranteed_ speed: 1000 KB/sec/disk.
[ 16.526907] md: using maximum available idle IO bandwidth (but not more than
200000 KB/sec) for recovery.
[ 16.526919] md: using 128k window, over a total of 976380736k.
[ 16.526920] md: resuming recovery of md1 from checkpoint.
[ 16.710281] EXT4-fs (dm-2): re-mounted. Opts: errors=remount-ro
[ 17.486707] loop: module loaded
[ 17.853414] Adding 1949692k swap on /dev/mapper/basecamp-swap_crypt.
Priority:-1 extents:1 across:1949692k
[ 18.098313] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts:
(null)
[ 18.519101] e1000e: eth1 NIC Link is Up 100 Mbps Full Duplex, Flow Control:
Rx/Tx
[ 18.519222] e1000e 0000:02:00.0 eth1: 10/100 speed: disabling TSO
[ 19.524215] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 19.596075] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 2391.771648] perf samples too long (2505 > 2500), lowering
kernel.perf_event_max_sample_rate to 50000
[ 5472.965928] md: md1: recovery done.
[ 5473.052687] RAID1 conf printout:
[ 5473.052689] --- wd:2 rd:2
[ 5473.052691] disk 0, wo:0, o:1, dev:sdb2
[ 5473.052693] disk 1, wo:0, o:1, dev:sda2
** Model information
sys_vendor: Intel Corporation
product_name: S1200BTL
product_version: ....................
chassis_vendor: ..............................
chassis_version: ..................
bios_vendor: Intel Corp.
bios_version: S1200BT.86B.02.00.0041.120520121743
board_vendor: Intel Corporation
board_name: S1200BTL
board_version: E98681-352
** Loaded modules:
xt_tcpudp
nf_conntrack_ipv4
nf_defrag_ipv4
xt_conntrack
nf_conntrack
iptable_filter
ip_tables
x_tables
loop
x86_pkg_temp_thermal
intel_powerclamp
intel_rapl
iTCO_wdt
iTCO_vendor_support
pcspkr
coretemp
lpc_ich
mfd_core
video
processor
kvm_intel
kvm
evdev
joydev
i2c_i801
i2c_core
button
ext4
crc16
mbcache
jbd2
dm_crypt
dm_mod
hid_generic
usbhid
hid
raid1
md_mod
sg
sd_mod
crc_t10dif
crct10dif_pclmul
crct10dif_common
crc32_pclmul
crc32c_intel
ghash_clmulni_intel
aesni_intel
aes_x86_64
lrw
gf128mul
glue_helper
ablk_helper
cryptd
ahci
libahci
ehci_pci
libata
ehci_hcd
scsi_mod
e1000e
usbcore
ptp
usb_common
pps_core
fan
thermal
thermal_sys
** Network interface configuration:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
# The primary network interface
allow-hotplug eth1
iface eth1 inet static
address 197.189.213.50
netmask 255.255.255.248
network 197.189.213.48
broadcast 197.189.213.55
gateway 197.189.213.49
# dns-* options are implemented by the resolvconf package, if installed
dns-nameservers 196.4.160.7
dns-search telic.co.za
auto eth1:0
iface eth1:0 inet static
address 197.189.213.51
netmask 255.255.255.248
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000
link/ether 00:1e:67:aa:37:95 brd ff:ff:ff:ff:ff:ff
3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP
qlen 1000
link/ether 00:1e:67:aa:37:94 brd ff:ff:ff:ff:ff:ff
inet 197.189.213.51/29 brd 197.189.213.55 scope global eth1:0
valid_lft forever preferred_lft forever
inet 197.189.213.50/29 brd 197.189.213.55 scope global secondary eth1
valid_lft forever preferred_lft forever
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes
packets errs drop fifo colls carrier compressed
eth0: 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0
eth1: 11483007 64511 0 0 0 0 0 0 8444990
61611 0 0 0 0 0 0
lo: 174526703 759793 0 0 0 0 0 0 174526703
759793 0 0 0 0 0 0
*** Protocol statistics:
Ip:
768011 total packets received
0 forwarded
0 incoming packets discarded
767781 incoming packets delivered
766941 requests sent out
Icmp:
0 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
0 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
Tcp:
5757 active connections openings
5687 passive connection openings
14 failed connection attempts
3503 connection resets received
83 connections established
708459 segments received
707349 segments send out
366 segments retransmited
0 bad segments received.
1870 resets sent
Udp:
59322 packets received
0 packets to unknown port received.
0 packet receive errors
59323 packets sent
UdpLite:
TcpExt:
88 invalid SYN cookies received
13 resets received for embryonic SYN_RECV sockets
3894 TCP sockets finished time wait in fast timer
56146 delayed acks sent
Quick ack mode was activated 10 times
446011 packets directly queued to recvmsg prequeue.
1411936 bytes directly in process context from backlog
48630252 bytes directly received in process context from prequeue
27833 packet headers predicted
434557 packets header predicted and directly queued to user
33524 acknowledgments not containing data payload received
428724 predicted acknowledgments
5 times recovered from packet loss by selective acknowledgements
Detected reordering 1 times using time stamp
1 congestion windows partially recovered using Hoe heuristic
3 congestion windows recovered without slow start by DSACK
5 congestion windows recovered without slow start after partial ack
5 timeouts after SACK recovery
7 fast retransmits
3 forward retransmits
79 other TCP timeouts
TCPLossProbes: 17
TCPLossProbeRecovery: 12
11 DSACKs sent for old packets
14 DSACKs received
2 connections reset due to unexpected data
1751 connections reset due to early user close
46 connections aborted due to timeout
TCPDSACKIgnoredNoUndo: 2
TCPSpuriousRTOs: 5
TCPSackMerged: 1
TCPSackShiftFallback: 31
TCPDeferAcceptDrop: 3
TCPRcvCoalesce: 8940
TCPOFOQueue: 97
TCPSpuriousRtxHostQueues: 6
IpExt:
InOctets: 180282184
OutOctets: 176858796
InNoECTPkts: 769539
InECT0Pkts: 1
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Xeon E3-1200 v2/Ivy Bridge DRAM
Controller [8086:0158] (rev 09)
Subsystem: Intel Corporation Device [8086:2010]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:19.0 Ethernet controller [0200]: Intel Corporation 82579LM Gigabit Network
Connection [8086:1502] (rev 05)
Subsystem: Intel Corporation Device [8086:3578]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 44
Region 0: Memory at c2400000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at c2470000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at 4040 [size=32]
Capabilities: <access denied>
Kernel driver in use: e1000e
00:1a.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset
Family USB Enhanced Host Controller #2 [8086:1c2d] (rev 05) (prog-if 20 [EHCI])
Subsystem: Intel Corporation Apple MacBookPro8,2 [Core i7, 15", 2011]
[8086:7270]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 22
Region 0: Memory at c2460000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1c.0 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset
Family PCI Express Root Port 1 [8086:1c10] (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: c1900000-c22fffff
Prefetchable memory behind bridge: 00000000c2500000-00000000c2efffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.4 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset
Family PCI Express Root Port 5 [8086:1c18] (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: c2300000-c23fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.5 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset
Family PCI Express Root Port 6 [8086:1c1a] (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
Memory behind bridge: c0000000-c18fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset
Family USB Enhanced Host Controller #1 [8086:1c26] (rev 05) (prog-if 20 [EHCI])
Subsystem: Intel Corporation Apple MacBookPro8,2 [Core i7, 15", 2011]
[8086:7270]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 0: Memory at c2450000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev
a5) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=04, subordinate=04, sec-latency=32
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn+
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation C204 Chipset Family LPC Controller
[8086:1c54] (rev 05)
Subsystem: Intel Corporation Device [8086:7270]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
00:1f.2 SATA controller [0106]: Intel Corporation 6 Series/C200 Series Chipset
Family SATA AHCI Controller [8086:1c02] (rev 05) (prog-if 01 [AHCI 1.0])
Subsystem: Intel Corporation Device [8086:7270]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 48
Region 0: I/O ports at 4090 [size=8]
Region 1: I/O ports at 4080 [size=4]
Region 2: I/O ports at 4070 [size=8]
Region 3: I/O ports at 4060 [size=4]
Region 4: I/O ports at 4020 [size=32]
Region 5: Memory at c2440000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 6 Series/C200 Series Chipset Family
SMBus Controller [8086:1c22] (rev 05)
Subsystem: Intel Corporation Apple MacBookPro8,2 [Core i7, 15", 2011]
[8086:7270]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin D routed to IRQ 22
Region 0: Memory at c2430000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 4000 [size=32]
02:00.0 Ethernet controller [0200]: Intel Corporation 82574L Gigabit Network
Connection [8086:10d3]
Subsystem: Intel Corporation Device [8086:3578]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at c2300000 (32-bit, non-prefetchable) [size=128K]
Region 2: I/O ports at 2000 [size=32]
Region 3: Memory at c2320000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: e1000e
03:00.0 VGA compatible controller [0300]: Matrox Electronics Systems Ltd. MGA
G200e [Pilot] ServerEngines (SEP1) [102b:0522] (rev 07) (prog-if 00 [VGA
controller])
Subsystem: Intel Corporation Device [8086:0102]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at c0000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at c1810000 (32-bit, non-prefetchable) [size=16K]
Region 2: Memory at c1000000 (32-bit, non-prefetchable) [size=8M]
Expansion ROM at c1800000 [disabled] [size=64K]
Capabilities: <access denied>
** USB devices:
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 046b:ff10 American Megatrends, Inc. Virtual Keyboard and
Mouse
-- System Information:
Debian Release: 7.4
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'stable')
Architecture: amd64 (x86_64)
Kernel: Linux 3.13-0.bpo.1-amd64 (SMP w/8 CPU cores)
Locale: LANG=en_ZA.UTF-8, LC_CTYPE=en_ZA.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.13-0.bpo.1-amd64 depends on:
ii debconf [debconf-2.0] 1.5.49
ii initramfs-tools [linux-initramfs-tool] 0.115~bpo70+1
ii kmod 9-3
ii linux-base 3.5
ii module-init-tools 9-3
Versions of packages linux-image-3.13-0.bpo.1-amd64 recommends:
ii firmware-linux-free 3.2
Versions of packages linux-image-3.13-0.bpo.1-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 1.99-27+deb7u2
pn linux-doc-3.13 <none>
Versions of packages linux-image-3.13-0.bpo.1-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
pn firmware-linux-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.13-0.bpo.1-amd64/prerm/removing-running-kernel-3.13-0.bpo.1-amd64:
true
linux-image-3.13-0.bpo.1-amd64/postinst/depmod-error-initrd-3.13-0.bpo.1-amd64:
false
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
