Package: linux-image-3.2.0-4-amd64
Version: 3.2.41-2
Dear Kernel Team,
I've been asked to resubmit this as a new bug report:
After installing debian wheezy (using rc2 media), I'm experiencing
problems shutting down, similar to what's reported in bug #691902:
When shutting down, the shutdown sequence runs up to 'Will now halt.'
Then the machine seems to turn off, but it comes back on a few seconds
later.
(It may not be relevant, but I encountered similar behavior
hibernating this machine under ubuntu 10.04, but in that case shutdown
worked okay, and IIRC the problem only occurred with a particular USB
drive attached.)
In any case, I tried linux images from snapshots and I got the results
listed below:
=========================== =========== ============
kernel version shutdown
--------------------------- ----------- ------------
linux-image-3.2.0-4-amd64 3.2.41-2 problematic
linux-image-3.2.0-2-amd64 3.2.14-1 problematic
linux-image-3.2.0-2-amd64 3.2.13-1 OK
=========================== =========== ============
The reportbug output is attached.
With much appreciation,
Aryeh Leib Taurog
On Tue, May 07, 2013 at 02:10:47PM -0700, Jonathan Nieder wrote:
> Interesting. Your hardware is quite different from the reporters
> of this bug and the corresponding upstream bug, so please file a
> new report. Then we can try to take this upstream.
>
> Thanks,
> Jonathan
-- Package-specific info:
** Version:
Linux version 3.2.0-4-amd64 (debian-ker...@lists.debian.org) (gcc version 4.6.3
(Debian 4.6.3-15) ) #1 SMP Debian 3.2.41-2
** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64
root=UUID=55c86996-4846-402b-a202-58a7af52fb82 ro quiet
** Not tainted
** Kernel log:
[ 1.802774] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.804963] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.805014] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.853568] usb 5-1: New USB device found, idVendor=17ef, idProduct=6019
[ 1.853573] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.853577] usb 5-1: Product: Lenovo USB Optical Mouse
[ 1.853580] usb 5-1: Manufacturer: Logitech
[ 1.869828] input: Logitech Lenovo USB Optical Mouse as
/devices/pci0000:00/0000:00:1d.1/usb5/5-1/5-1:1.0/input/input2
[ 1.869946] generic-usb 0003:17EF:6019.0003: input,hidraw2: USB HID v1.11
Mouse [Logitech Lenovo USB Optical Mouse] on usb-0000:00:1d.1-1/input0
[ 2.831003] PM: Starting manual resume from disk
[ 2.831007] PM: Hibernation image partition 8:2 present
[ 2.831009] PM: Looking for hibernation image.
[ 2.831218] PM: Image not found (code -22)
[ 2.831221] PM: Hibernation image not present or could not be loaded.
[ 2.853991] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts:
(null)
[ 4.117225] udevd[339]: starting version 175
[ 4.677431] input: Power Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/PNP0C0C:00/input/input3
[ 4.677439] ACPI: Power Button [PWRB]
[ 4.677500] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 4.677504] ACPI: Power Button [PWRF]
[ 4.714053] tpm_tis 00:0a: 1.2 TPM (device-id 0x1002, rev-id 2)
[ 4.856917] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 4.865544] coretemp coretemp.0: Using relative temperature scale!
[ 4.865561] coretemp coretemp.0: Using relative temperature scale!
[ 4.896113] ACPI: Requesting acpi_cpufreq
[ 4.941680] i801_smbus 0000:00:1f.3: enabling device (0001 -> 0003)
[ 5.075284] iTCO_vendor_support: vendor-support=0
[ 5.076117] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[ 5.076217] iTCO_wdt: Found a ICH8 or ICH8R TCO device (Version=2,
TCOBASE=0x1060)
[ 5.076280] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 5.206380] [drm] Initialized drm 1.1.0 20060810
[ 5.276130] tpm_tis 00:0a: Adjusting TPM timeout parameters.
[ 5.300086] parport_pc 00:09: reported by Plug and Play ACPI
[ 5.300160] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
[ 5.312973] snd_hda_intel 0000:00:1b.0: irq 42 for MSI/MSI-X
[ 5.313000] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 5.389476] input: HDA Digital PCBeep as
/devices/pci0000:00/0000:00:1b.0/input/input6
[ 5.393738] i915 0000:00:02.0: setting latency timer to 64
[ 5.463583] i915 0000:00:02.0: irq 43 for MSI/MSI-X
[ 5.463590] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 5.463592] [drm] Driver supports precise vblank timestamp query.
[ 5.463633] vgaarb: device changed decodes:
PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 5.480220] [drm] initialized overlay support
[ 5.514980] composite sync not supported
[ 5.523561] fbcon: inteldrmfb (fb0) is primary device
[ 5.573763] Console: switching to colour frame buffer device 240x67
[ 5.582853] fb0: inteldrmfb frame buffer device
[ 5.582855] drm: registered panic notifier
[ 5.582909] ACPI Exception: AE_NOT_FOUND, Evaluating _DOD
(20110623/video-1161)
[ 5.582993] input: Video Bus as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:00/input/input7
[ 5.583056] ACPI: Video Device [IGD0] (multi-head: yes rom: no post: no)
[ 5.583093] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 8.477560] Adding 3906556k swap on /dev/sda2. Priority:-1 extents:1
across:3906556k
[ 8.491163] EXT4-fs (sda1): re-mounted. Opts: (null)
[ 8.659631] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 8.743477] loop: module loaded
[ 10.022743] RPC: Registered named UNIX socket transport module.
[ 10.022747] RPC: Registered udp transport module.
[ 10.022749] RPC: Registered tcp transport module.
[ 10.022751] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 10.060759] FS-Cache: Loaded
[ 10.105837] FS-Cache: Netfs 'nfs' registered for caching
[ 10.114749] Installing knfsd (copyright (C) 1996 o...@monad.swb.de).
[ 10.429719] tg3 0000:03:00.0: irq 44 for MSI/MSI-X
[ 10.463049] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 12.152094] tg3 0000:03:00.0: eth0: Link is up at 100 Mbps, full duplex
[ 12.152098] tg3 0000:03:00.0: eth0: Flow control is on for TX and on for RX
[ 12.152692] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 13.597407] Bluetooth: Core ver 2.16
[ 13.597428] NET: Registered protocol family 31
[ 13.597431] Bluetooth: HCI device and connection manager initialized
[ 13.597434] Bluetooth: HCI socket layer initialized
[ 13.597436] Bluetooth: L2CAP socket layer initialized
[ 13.597442] Bluetooth: SCO socket layer initialized
[ 13.761972] Bluetooth: RFCOMM TTY layer initialized
[ 13.761978] Bluetooth: RFCOMM socket layer initialized
[ 13.761980] Bluetooth: RFCOMM ver 1.11
[ 13.870431] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 13.870434] Bluetooth: BNEP filters: protocol multicast
[ 15.632602] lp0: using parport0 (interrupt-driven).
[ 15.660567] ppdev: user-space parallel port driver
[ 17.655237] composite sync not supported
[ 17.695111] composite sync not supported
[ 19.255131] composite sync not supported
[ 20.404451] postgres (2679): /proc/2679/oom_adj is deprecated, please use
/proc/2679/oom_score_adj instead.
[ 22.864071] eth0: no IPv6 routers present
[ 24.035086] composite sync not supported
[ 37.211252] composite sync not supported
[ 37.975765] composite sync not supported
[ 39.255247] composite sync not supported
[ 97.060231] device-mapper: uevent: version 1.0.3
[ 97.060319] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised:
dm-de...@redhat.com
[ 101.661732] EFI Variables Facility v0.08 2004-May-17
[ 101.883378] SGI XFS with ACLs, security attributes, realtime, large
block/inode numbers, no debug enabled
[ 101.883724] SGI XFS Quota Management subsystem
[ 101.895618] JFS: nTxBlock = 8192, nTxLock = 65536
[ 101.938722] NTFS driver 2.1.30 [Flags: R/W MODULE].
[ 101.989024] QNX4 filesystem 0.2.3 registered.
[ 102.057234] Btrfs loaded
[ 102.088205] fuse init (API version 7.17)
** Model information
sys_vendor: LENOVO
product_name: 8807DE1
product_version: ThinkCentre M55
chassis_vendor: LENOVO
chassis_version: NONE
bios_vendor: LENOVO
bios_version: 2JKT36AUS
board_vendor: LENOVO
board_name: LENOVO
board_version: NONE
** Loaded modules:
fuse
btrfs
crc32c
libcrc32c
zlib_deflate
ufs
qnx4
hfsplus
hfs
minix
ntfs
vfat
msdos
fat
jfs
xfs
reiserfs
ext3
jbd
ext2
efivars
dm_mod
ppdev
lp
bnep
rfcomm
bluetooth
rfkill
binfmt_misc
nfsd
nfs
nfs_acl
auth_rpcgss
fscache
lockd
sunrpc
loop
joydev
snd_hda_codec_analog
i915
snd_hda_intel
snd_hda_codec
snd_hwdep
drm_kms_helper
snd_pcm
drm
snd_page_alloc
parport_pc
iTCO_wdt
iTCO_vendor_support
snd_seq
snd_seq_device
snd_timer
i2c_algo_bit
parport
snd
i2c_i801
acpi_cpufreq
evdev
i2c_core
mperf
video
processor
psmouse
coretemp
pcspkr
serio_raw
container
thermal_sys
soundcore
tpm_tis
tpm
tpm_bios
button
ext4
crc16
jbd2
mbcache
sg
sd_mod
crc_t10dif
sr_mod
cdrom
usbhid
hid
ata_generic
floppy
ata_piix
uhci_hcd
libata
tg3
libphy
ehci_hcd
scsi_mod
usbcore
usb_common
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 82Q963/Q965 Memory Controller Hub
[8086:2990] (rev 02)
Subsystem: Lenovo Device [17aa:100c]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation 82Q963/Q965
Integrated Graphics Controller [8086:2992] (rev 02) (prog-if 00 [VGA
controller])
Subsystem: Lenovo Device [17aa:100c]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 43
Region 0: Memory at d0000000 (32-bit, non-prefetchable) [size=1M]
Region 2: Memory at c0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at 30e0 [size=8]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:1a.0 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI
Controller #4 [8086:2834] (rev 02) (prog-if 00 [UHCI])
Subsystem: Lenovo Device [17aa:100c]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at 3000 [size=32]
Kernel driver in use: uhci_hcd
00:1a.7 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI
Controller #2 [8086:283a] (rev 02) (prog-if 20 [EHCI])
Subsystem: Lenovo Device [17aa:100c]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at d0404000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD Audio
Controller [8086:284b] (rev 02)
Subsystem: Lenovo Device [17aa:100c]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 42
Region 0: Memory at d0200000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express
Port 1 [8086:283f] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00004000-00004fff
Memory behind bridge: d0700000-d08fffff
Prefetchable memory behind bridge: 00000000d0900000-00000000d0afffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset+ FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.4 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express
Port 5 [8086:2847] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: d0100000-d01fffff
Prefetchable memory behind bridge: 00000000d0500000-00000000d06fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI
Controller #1 [8086:2830] (rev 02) (prog-if 00 [UHCI])
Subsystem: Lenovo Device [17aa:100c]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at 3020 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI
Controller #2 [8086:2831] (rev 02) (prog-if 00 [UHCI])
Subsystem: Lenovo Device [17aa:100c]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at 3040 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI
Controller #3 [8086:2832] (rev 02) (prog-if 00 [UHCI])
Subsystem: Lenovo Device [17aa:100c]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at 3060 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI
Controller #1 [8086:2836] (rev 02) (prog-if 20 [EHCI])
Subsystem: Lenovo Device [17aa:100c]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at d0404400 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev
f2) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=0a, subordinate=0a, sec-latency=32
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801HB/HR (ICH8/R) LPC Interface
Controller [8086:2810] (rev 02)
Subsystem: Lenovo Device [17aa:100c]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.2 IDE interface [0101]: Intel Corporation 82801H (ICH8 Family) 4 port
SATA Controller [IDE mode] [8086:2820] (rev 02) (prog-if 8a [Master SecP PriP])
Subsystem: Lenovo Device [17aa:100c]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at 30b0 [size=16]
Region 5: I/O ports at 30a0 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation 82801H (ICH8 Family) SMBus Controller
[8086:283e] (rev 02)
Subsystem: Lenovo Device [17aa:100c]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 17
Region 0: Memory at d0404800 (32-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 3080 [size=32]
Kernel driver in use: i801_smbus
00:1f.5 IDE interface [0101]: Intel Corporation 82801HR/HO/HH (ICH8R/DO/DH) 2
port SATA Controller [IDE mode] [8086:2825] (rev 02) (prog-if 85 [Master SecO
PriO])
Subsystem: Lenovo Device [17aa:100c]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: I/O ports at 3410 [size=8]
Region 1: I/O ports at 3404 [size=4]
Region 2: I/O ports at 3408 [size=8]
Region 3: I/O ports at 3400 [size=4]
Region 4: I/O ports at 30d0 [size=16]
Region 5: I/O ports at 30c0 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
03:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5755
Gigabit Ethernet PCI Express [14e4:167b] (rev 02)
Subsystem: Lenovo Device [17aa:100c]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 44
Region 0: Memory at d0100000 (64-bit, non-prefetchable) [size=64K]
Expansion ROM at <ignored> [disabled]
Capabilities: <access denied>
Kernel driver in use: tg3
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 002: ID 1c4f:0002 SiGma Micro Keyboard TRACER Gamma Ivory
Bus 005 Device 002: ID 17ef:6019 Lenovo
-- System Information:
Debian Release: 7.0
APT prefers testing
APT policy: (500, 'testing'), (500, 'stable')
Architecture: amd64 (x86_64)
Kernel: Linux 3.2.0-4-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.2.0-4-amd64 depends on:
ii debconf [debconf-2.0] 1.5.49
ii initramfs-tools [linux-initramfs-tool] 0.109.1
ii kmod 9-3
ii linux-base 3.5
ii module-init-tools 9-3
Versions of packages linux-image-3.2.0-4-amd64 recommends:
pn firmware-linux-free <none>
Versions of packages linux-image-3.2.0-4-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 1.99-27+deb7u1
pn linux-doc-3.2 <none>
Versions of packages linux-image-3.2.0-4-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
pn firmware-linux-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.2.0-4-amd64/postinst/depmod-error-initrd-3.2.0-4-amd64: false
linux-image-3.2.0-4-amd64/prerm/removing-running-kernel-3.2.0-4-amd64: true
linux-image-3.2.0-4-amd64/postinst/ignoring-ramdisk:
linux-image-3.2.0-4-amd64/postinst/missing-firmware-3.2.0-4-amd64:
