Dear Kernel Team,
After installing debian wheezy (using rc2 media), I'm experiencing
the same problem described in this bug. The shutdown sequence runs up
to 'Will now halt.' Then the machine seems to turn off, but it comes
back on a few seconds later.
I tried with the suggested images from snapshots and I got the same
results described above:
=========================== =========== ============
kernel version shutdown
--------------------------- ----------- ------------
linux-image-3.2.0-4-amd64 3.2.41-2 problematic
linux-image-3.2.0-2-amd64 3.2.14-1 problematic
linux-image-3.2.0-2-amd64 3.2.13-1 OK
=========================== =========== ============
I am attaching the reportbug output.
With appreciation,
Aryeh Leib Taurog
-- Package-specific info:
** Version:
Linux version 3.2.0-4-amd64 (debian-ker...@lists.debian.org) (gcc version 4.6.3
(Debian 4.6.3-15) ) #1 SMP Debian 3.2.41-2
** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64
root=UUID=55c86996-4846-402b-a202-58a7af52fb82 ro quiet
** Not tainted
** Kernel log:
[ 1.802774] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.804963] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.805014] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.853568] usb 5-1: New USB device found, idVendor=17ef, idProduct=6019
[ 1.853573] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.853577] usb 5-1: Product: Lenovo USB Optical Mouse
[ 1.853580] usb 5-1: Manufacturer: Logitech
[ 1.869828] input: Logitech Lenovo USB Optical Mouse as
/devices/pci0000:00/0000:00:1d.1/usb5/5-1/5-1:1.0/input/input2
[ 1.869946] generic-usb 0003:17EF:6019.0003: input,hidraw2: USB HID v1.11
Mouse [Logitech Lenovo USB Optical Mouse] on usb-0000:00:1d.1-1/input0
[ 2.831003] PM: Starting manual resume from disk
[ 2.831007] PM: Hibernation image partition 8:2 present
[ 2.831009] PM: Looking for hibernation image.
[ 2.831218] PM: Image not found (code -22)
[ 2.831221] PM: Hibernation image not present or could not be loaded.
[ 2.853991] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts:
(null)
[ 4.117225] udevd[339]: starting version 175
[ 4.677431] input: Power Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/PNP0C0C:00/input/input3
[ 4.677439] ACPI: Power Button [PWRB]
[ 4.677500] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 4.677504] ACPI: Power Button [PWRF]
[ 4.714053] tpm_tis 00:0a: 1.2 TPM (device-id 0x1002, rev-id 2)
[ 4.856917] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 4.865544] coretemp coretemp.0: Using relative temperature scale!
[ 4.865561] coretemp coretemp.0: Using relative temperature scale!
[ 4.896113] ACPI: Requesting acpi_cpufreq
[ 4.941680] i801_smbus 0000:00:1f.3: enabling device (0001 -> 0003)
[ 5.075284] iTCO_vendor_support: vendor-support=0
[ 5.076117] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[ 5.076217] iTCO_wdt: Found a ICH8 or ICH8R TCO device (Version=2,
TCOBASE=0x1060)
[ 5.076280] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 5.206380] [drm] Initialized drm 1.1.0 20060810
[ 5.276130] tpm_tis 00:0a: Adjusting TPM timeout parameters.
[ 5.300086] parport_pc 00:09: reported by Plug and Play ACPI
[ 5.300160] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
[ 5.312973] snd_hda_intel 0000:00:1b.0: irq 42 for MSI/MSI-X
[ 5.313000] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 5.389476] input: HDA Digital PCBeep as
/devices/pci0000:00/0000:00:1b.0/input/input6
[ 5.393738] i915 0000:00:02.0: setting latency timer to 64
[ 5.463583] i915 0000:00:02.0: irq 43 for MSI/MSI-X
[ 5.463590] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 5.463592] [drm] Driver supports precise vblank timestamp query.
[ 5.463633] vgaarb: device changed decodes:
PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 5.480220] [drm] initialized overlay support
[ 5.514980] composite sync not supported
[ 5.523561] fbcon: inteldrmfb (fb0) is primary device
[ 5.573763] Console: switching to colour frame buffer device 240x67
[ 5.582853] fb0: inteldrmfb frame buffer device
[ 5.582855] drm: registered panic notifier
[ 5.582909] ACPI Exception: AE_NOT_FOUND, Evaluating _DOD
(20110623/video-1161)
[ 5.582993] input: Video Bus as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:00/input/input7
[ 5.583056] ACPI: Video Device [IGD0] (multi-head: yes rom: no post: no)
[ 5.583093] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 8.477560] Adding 3906556k swap on /dev/sda2. Priority:-1 extents:1
across:3906556k
[ 8.491163] EXT4-fs (sda1): re-mounted. Opts: (null)
[ 8.659631] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 8.743477] loop: module loaded
[ 10.022743] RPC: Registered named UNIX socket transport module.
[ 10.022747] RPC: Registered udp transport module.
[ 10.022749] RPC: Registered tcp transport module.
[ 10.022751] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 10.060759] FS-Cache: Loaded
[ 10.105837] FS-Cache: Netfs 'nfs' registered for caching
[ 10.114749] Installing knfsd (copyright (C) 1996 o...@monad.swb.de).
[ 10.429719] tg3 0000:03:00.0: irq 44 for MSI/MSI-X
[ 10.463049] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 12.152094] tg3 0000:03:00.0: eth0: Link is up at 100 Mbps, full duplex
[ 12.152098] tg3 0000:03:00.0: eth0: Flow control is on for TX and on for RX
[ 12.152692] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 13.597407] Bluetooth: Core ver 2.16
[ 13.597428] NET: Registered protocol family 31
[ 13.597431] Bluetooth: HCI device and connection manager initialized
[ 13.597434] Bluetooth: HCI socket layer initialized
[ 13.597436] Bluetooth: L2CAP socket layer initialized
[ 13.597442] Bluetooth: SCO socket layer initialized
[ 13.761972] Bluetooth: RFCOMM TTY layer initialized
[ 13.761978] Bluetooth: RFCOMM socket layer initialized
[ 13.761980] Bluetooth: RFCOMM ver 1.11
[ 13.870431] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 13.870434] Bluetooth: BNEP filters: protocol multicast
[ 15.632602] lp0: using parport0 (interrupt-driven).
[ 15.660567] ppdev: user-space parallel port driver
[ 17.655237] composite sync not supported
[ 17.695111] composite sync not supported
[ 19.255131] composite sync not supported
[ 20.404451] postgres (2679): /proc/2679/oom_adj is deprecated, please use
/proc/2679/oom_score_adj instead.
[ 22.864071] eth0: no IPv6 routers present
[ 24.035086] composite sync not supported
[ 37.211252] composite sync not supported
[ 37.975765] composite sync not supported
[ 39.255247] composite sync not supported
[ 97.060231] device-mapper: uevent: version 1.0.3
[ 97.060319] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised:
dm-de...@redhat.com
[ 101.661732] EFI Variables Facility v0.08 2004-May-17
[ 101.883378] SGI XFS with ACLs, security attributes, realtime, large
block/inode numbers, no debug enabled
[ 101.883724] SGI XFS Quota Management subsystem
[ 101.895618] JFS: nTxBlock = 8192, nTxLock = 65536
[ 101.938722] NTFS driver 2.1.30 [Flags: R/W MODULE].
[ 101.989024] QNX4 filesystem 0.2.3 registered.
[ 102.057234] Btrfs loaded
[ 102.088205] fuse init (API version 7.17)
** Model information
sys_vendor: LENOVO
product_name: 8807DE1
product_version: ThinkCentre M55
chassis_vendor: LENOVO
chassis_version: NONE
bios_vendor: LENOVO
bios_version: 2JKT36AUS
board_vendor: LENOVO
board_name: LENOVO
board_version: NONE
** Loaded modules:
fuse
btrfs
crc32c
libcrc32c
zlib_deflate
ufs
qnx4
hfsplus
hfs
minix
ntfs
vfat
msdos
fat
jfs
xfs
reiserfs
ext3
jbd
ext2
efivars
dm_mod
ppdev
lp
bnep
rfcomm
bluetooth
rfkill
binfmt_misc
nfsd
nfs
nfs_acl
auth_rpcgss
fscache
lockd
sunrpc
loop
joydev
snd_hda_codec_analog
i915
snd_hda_intel
snd_hda_codec
snd_hwdep
drm_kms_helper
snd_pcm
drm
snd_page_alloc
parport_pc
iTCO_wdt
iTCO_vendor_support
snd_seq
snd_seq_device
snd_timer
i2c_algo_bit
parport
snd
i2c_i801
acpi_cpufreq
evdev
i2c_core
mperf
video
processor
psmouse
coretemp
pcspkr
serio_raw
container
thermal_sys
soundcore
tpm_tis
tpm
tpm_bios
button
ext4
crc16
jbd2
mbcache
sg
sd_mod
crc_t10dif
sr_mod
cdrom
usbhid
hid
ata_generic
floppy
ata_piix
uhci_hcd
libata
tg3
libphy
ehci_hcd
scsi_mod
usbcore
usb_common
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 82Q963/Q965 Memory Controller Hub
[8086:2990] (rev 02)
Subsystem: Lenovo Device [17aa:100c]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation 82Q963/Q965
Integrated Graphics Controller [8086:2992] (rev 02) (prog-if 00 [VGA
controller])
Subsystem: Lenovo Device [17aa:100c]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 43
Region 0: Memory at d0000000 (32-bit, non-prefetchable) [size=1M]
Region 2: Memory at c0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at 30e0 [size=8]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:1a.0 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI
Controller #4 [8086:2834] (rev 02) (prog-if 00 [UHCI])
Subsystem: Lenovo Device [17aa:100c]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at 3000 [size=32]
Kernel driver in use: uhci_hcd
00:1a.7 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI
Controller #2 [8086:283a] (rev 02) (prog-if 20 [EHCI])
Subsystem: Lenovo Device [17aa:100c]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at d0404000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD Audio
Controller [8086:284b] (rev 02)
Subsystem: Lenovo Device [17aa:100c]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 42
Region 0: Memory at d0200000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express
Port 1 [8086:283f] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00004000-00004fff
Memory behind bridge: d0700000-d08fffff
Prefetchable memory behind bridge: 00000000d0900000-00000000d0afffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset+ FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.4 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express
Port 5 [8086:2847] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: d0100000-d01fffff
Prefetchable memory behind bridge: 00000000d0500000-00000000d06fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI
Controller #1 [8086:2830] (rev 02) (prog-if 00 [UHCI])
Subsystem: Lenovo Device [17aa:100c]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at 3020 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI
Controller #2 [8086:2831] (rev 02) (prog-if 00 [UHCI])
Subsystem: Lenovo Device [17aa:100c]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at 3040 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI
Controller #3 [8086:2832] (rev 02) (prog-if 00 [UHCI])
Subsystem: Lenovo Device [17aa:100c]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at 3060 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI
Controller #1 [8086:2836] (rev 02) (prog-if 20 [EHCI])
Subsystem: Lenovo Device [17aa:100c]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at d0404400 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev
f2) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=0a, subordinate=0a, sec-latency=32
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801HB/HR (ICH8/R) LPC Interface
Controller [8086:2810] (rev 02)
Subsystem: Lenovo Device [17aa:100c]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.2 IDE interface [0101]: Intel Corporation 82801H (ICH8 Family) 4 port
SATA Controller [IDE mode] [8086:2820] (rev 02) (prog-if 8a [Master SecP PriP])
Subsystem: Lenovo Device [17aa:100c]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at 30b0 [size=16]
Region 5: I/O ports at 30a0 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation 82801H (ICH8 Family) SMBus Controller
[8086:283e] (rev 02)
Subsystem: Lenovo Device [17aa:100c]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 17
Region 0: Memory at d0404800 (32-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 3080 [size=32]
Kernel driver in use: i801_smbus
00:1f.5 IDE interface [0101]: Intel Corporation 82801HR/HO/HH (ICH8R/DO/DH) 2
port SATA Controller [IDE mode] [8086:2825] (rev 02) (prog-if 85 [Master SecO
PriO])
Subsystem: Lenovo Device [17aa:100c]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: I/O ports at 3410 [size=8]
Region 1: I/O ports at 3404 [size=4]
Region 2: I/O ports at 3408 [size=8]
Region 3: I/O ports at 3400 [size=4]
Region 4: I/O ports at 30d0 [size=16]
Region 5: I/O ports at 30c0 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
03:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5755
Gigabit Ethernet PCI Express [14e4:167b] (rev 02)
Subsystem: Lenovo Device [17aa:100c]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 44
Region 0: Memory at d0100000 (64-bit, non-prefetchable) [size=64K]
Expansion ROM at <ignored> [disabled]
Capabilities: <access denied>
Kernel driver in use: tg3
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 002: ID 1c4f:0002 SiGma Micro Keyboard TRACER Gamma Ivory
Bus 005 Device 002: ID 17ef:6019 Lenovo
-- System Information:
Debian Release: 7.0
APT prefers testing
APT policy: (500, 'testing'), (500, 'stable')
Architecture: amd64 (x86_64)
Kernel: Linux 3.2.0-4-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.2.0-4-amd64 depends on:
ii debconf [debconf-2.0] 1.5.49
ii initramfs-tools [linux-initramfs-tool] 0.109.1
ii kmod 9-3
ii linux-base 3.5
ii module-init-tools 9-3
Versions of packages linux-image-3.2.0-4-amd64 recommends:
pn firmware-linux-free <none>
Versions of packages linux-image-3.2.0-4-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 1.99-27+deb7u1
pn linux-doc-3.2 <none>
Versions of packages linux-image-3.2.0-4-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
pn firmware-linux-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.2.0-4-amd64/postinst/depmod-error-initrd-3.2.0-4-amd64: false
linux-image-3.2.0-4-amd64/prerm/removing-running-kernel-3.2.0-4-amd64: true
linux-image-3.2.0-4-amd64/postinst/ignoring-ramdisk:
linux-image-3.2.0-4-amd64/postinst/missing-firmware-3.2.0-4-amd64:
