Hi Michael, Am Dienstag, 29. Januar 2013 schrieb Michael Biebl: > On 29.01.2013 23:24, Andreas Stempfhuber wrote: > > I have newly installed Wheezy and the network manager is not able to > > connect to the network using the following Cardbus PCMCIA ethernet card: > > > > 06:00.0 Ethernet controller: Xircom Cardbus Ethernet 10/100 (rev 03) > > > > Subsystem: Xircom RealPort2 CardBus Ethernet 10/100 (R2BE-100) > > Flags: bus master, medium devsel, latency 64, IRQ 9 > > I/O ports at 2000 [size=128] > > Memory at 18000000 (32-bit, non-prefetchable) [size=2K] > > Memory at 18000800 (32-bit, non-prefetchable) [size=2K] > > [virtual] Expansion ROM at 1c000000 [disabled] [size=16K] > > Capabilities: [dc] Power Management version 2 > > Kernel driver in use: xircom_cb > > > > The interface worked during the installation and bringing the interface > > up manually using > > What's the content of /etc/network/interfaces? > Devices listed in there will not be managed by NM (to avoid stomping > over a ifupdown configure interface).
it's a brand new Wheezy installation (I actually tried two brand new installations to exclude issues with the Notebook hardware) and /etc/network/interfaces is at default, only localhost is there. What looks a bit strange to me is "GENERAL.STATE: 20 (unavailable)" as this is not shown up with working cards. Thanks, Andi -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
