Package: cups Version: 1.5.2-5 Severity: normal Please see #662025 for more information / history.
Previously I had two printer queues which worked just fine (previously
until around mid february). After the queues stopped working I report
#662025 and in this process a new queue was installed which - together
with a new version of foomatic-filters - enabled printing again; however
the previous queues do not print, and the message
"/usr/lib/cups/backend/usb failed" is shown instead.
Not working "old" queues:
FS-1020D and Kyocera_FS-1020D
Working "new" queue:
Kyocera-FS-1020D-Postscript-Kyocera
helge@sneo:~$ lpstat -a
FS-1020D accepting requests since So 18 Mär 2012 11:30:36 CET
FS-1020D-file accepting requests since So 11 Mär 2012 19:04:25 CET
Kyocera-FS-1020D-Postscript-Kyocera accepting requests since So 11 Mär 2012
19:16:22 CET
Kyocera-FS-1020D-Postscript-Kyocera-file accepting requests since So 11 Mär
2012 19:04:31 CET
Kyocera_FS-1020D accepting requests since So 11 Mär 2012 19:16:22 CET
Kyocera_FS-1020D-file accepting requests since So 11 Mär 2012 19:04:37 CET
helge@sneo:~$ lpstat -t
scheduler is running
system default destination: FS-1020D
device for FS-1020D: usb://Kyocera/FS-1020D?serial=XAX5560374
device for FS-1020D-file: /tmp/printout-FS-1020D
device for Kyocera-FS-1020D-Postscript-Kyocera:
usb://Kyocera/FS-1020D?serial=XAX5560374
device for Kyocera-FS-1020D-Postscript-Kyocera-file:
/tmp/printout-Kyocera-FS-1020D-Postscript-Kyocera
device for Kyocera_FS-1020D: usb://Kyocera/FS-1020D?serial=XAX5560374
device for Kyocera_FS-1020D-file: /tmp/printout-Kyocera_FS-1020D
FS-1020D accepting requests since So 18 Mär 2012 11:30:36 CET
FS-1020D-file accepting requests since So 11 Mär 2012 19:04:25 CET
Kyocera-FS-1020D-Postscript-Kyocera accepting requests since So 11 Mär 2012
19:16:22 CET
Kyocera-FS-1020D-Postscript-Kyocera-file accepting requests since So 11 Mär
2012 19:04:31 CET
Kyocera_FS-1020D accepting requests since So 11 Mär 2012 19:16:22 CET
Kyocera_FS-1020D-file accepting requests since So 11 Mär 2012 19:04:37 CET
printer FS-1020D disabled since So 18 Mär 2012 11:30:36 CET -
/usr/lib/cups/backend/usb failed
printer FS-1020D-file is idle. enabled since So 11 Mär 2012 19:04:25 CET
printer Kyocera-FS-1020D-Postscript-Kyocera is idle. enabled since So 11 Mär
2012 19:16:22 CET
printer Kyocera-FS-1020D-Postscript-Kyocera-file is idle. enabled since So 11
Mär 2012 19:04:31 CET
printer Kyocera_FS-1020D disabled since So 11 Mär 2012 19:16:22 CET -
/usr/lib/cups/backend/usb failed
printer Kyocera_FS-1020D-file is idle. enabled since So 11 Mär 2012 19:04:37
CET
Kyocera_FS-1020D-282 helge 103424 So 25 Mär 2012 15:07:08 CEST
FS-1020D-284 helge 20480 So 25 Mär 2012 15:45:04 CEST
Error log from today is attached.
helge@sneo:~$ lpstat -v
device for FS-1020D: usb://Kyocera/FS-1020D?serial=XAX5560374
device for FS-1020D-file: /tmp/printout-FS-1020D
device for Kyocera-FS-1020D-Postscript-Kyocera:
usb://Kyocera/FS-1020D?serial=XAX5560374
device for Kyocera-FS-1020D-Postscript-Kyocera-file:
/tmp/printout-Kyocera-FS-1020D-Postscript-Kyocera
device for Kyocera_FS-1020D: usb://Kyocera/FS-1020D?serial=XAX5560374
device for Kyocera_FS-1020D-file: /tmp/printout-Kyocera_FS-1020D
https://wiki.ubuntu.com/DebuggingPrintingProblems Section "USB printer"
root@sneo:~# lsmod | grep usb
usblp 12593 0
usbhid 30418 0
Apr 14 20:43:35 sneo kernel: usb 4-5.2: new full-speed USB device number 4
using ohci_hcd
Apr 14 20:43:35 sneo kernel: usb 4-5.2: New USB device found, idVendor=0482,
idProduct=000e
Apr 14 20:43:35 sneo kernel: usb 4-5.2: New USB device strings: Mfr=1,
Product=2, SerialNumber=3
Apr 14 20:43:35 sneo kernel: usb 4-5.2: Product: Kyocera Mita FS-1020D
Apr 14 20:43:35 sneo kernel: usb 4-5.2: Manufacturer: Kyocera Mita
Apr 14 20:43:35 sneo kernel: usb 4-5.2: SerialNumber: XAX5560374
Apr 14 20:43:35 sneo kernel: usblp0: USB Bidirectional printer dev 4 if 0 alt 0
proto 2 vid 0x0482 pid 0x000E
Apr 14 20:43:35 sneo mtp-probe: checking bus 4, device 4:
"/sys/devices/pci0000:00/0000:00:12.0/usb4/4-5/4-5.2"
Apr 14 20:43:35 sneo mtp-probe: bus: 4, device: 4 was not an MTP device
Apr 14 20:43:35 sneo udev-configure-printer: add
/devices/pci0000:00/0000:00:12.0/usb4/4-5/4-5.2/4-5.2:1.0
Apr 14 20:43:35 sneo udev-configure-printer: device devpath is
/devices/pci0000:00/0000:00:12.0/usb4/4-5/4-5.2
Apr 14 20:43:35 sneo udev-configure-printer: Device already handled
Apr 14 20:43:35 sneo udev-configure-printer: add
/devices/pci0000:00/0000:00:12.0/usb4/4-5/4-5.2/4-5.2:1.0/usb/lp0
Apr 14 20:43:35 sneo udev-configure-printer: device devpath is
/devices/pci0000:00/0000:00:12.0/usb4/4-5/4-5.2
Apr 14 20:43:35 sneo udev-configure-printer: Device already handled
root@sneo:~# lsusb
...
Bus 004 Device 004: ID 0482:000e Kyocera Corp. FS-1020D Printer
root@sneo:~# ls -l /dev/usb/lp* /dev/bus/usb/*/*
crw-rw-r-T 1 root root 189, 0 Apr 14 14:31 /dev/bus/usb/001/001
crw-rw-r-T 1 root root 189, 128 Apr 14 14:31 /dev/bus/usb/002/001
crw-rw-r-T 1 root root 189, 256 Apr 14 14:31 /dev/bus/usb/003/001
crw-rw-r-T 1 root root 189, 384 Apr 14 14:31 /dev/bus/usb/004/001
crw-rw-r-T 1 root root 189, 385 Apr 14 14:31 /dev/bus/usb/004/002
crw-rw-r-T 1 root lp 189, 386 Apr 14 20:42 /dev/bus/usb/004/003
crw-rw-r-T 1 root lp 189, 387 Apr 14 20:43 /dev/bus/usb/004/004
crw-rw-r-T 1 root root 189, 512 Apr 14 14:31 /dev/bus/usb/005/001
crw-rw-r-T 1 root root 189, 513 Apr 14 14:31 /dev/bus/usb/005/002
crw-rw-r-T 1 root root 189, 640 Apr 14 14:31 /dev/bus/usb/006/001
crw-rw-r-T 1 root root 189, 768 Apr 14 14:31 /dev/bus/usb/007/001
crw-rw---T 1 root lp 180, 0 Apr 14 20:43 /dev/usb/lp0
Installing printer-driver-foo2zjs
root@sneo:~# usb_printerid /dev/usb/lp0
GET_DEVICE_ID string:
ID:FS-1020D;MFG:Kyocera;CMD:PCLXL,PostScript
Emulation,PCL5E,PJL;MDL:FS-1020D;CLS:PRINTER;DES:Kyocera Mita FS-1020D;CID:HP
Laserjet 1300 Series;
root@sneo:~# usb_printerid /dev/usb/lp1
Error: No such file or directory: can't open '/dev/usb/lp1'
root@sneo:~# lpinfo -v
network http
network ipps
network lpd
network ipp
network https
network socket
direct usb://Kyocera/FS-1020D?serial=XAX5560374
network beh
direct scsi
network smb
-- System Information:
Debian Release: wheezy/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: amd64 (x86_64)
Kernel: Linux 3.2.14sneo.02-grsec (SMP w/6 CPU cores)
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8) (ignored: LC_ALL
set to de_DE.UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages cups depends on:
ii adduser 3.113+nmu1
ii bc 1.06.95-2+b1
ii cups-client 1.5.2-5
ii cups-common 1.5.2-5
ii cups-filters 1.0.7-1
ii cups-ppdc 1.5.2-5
ii debconf [debconf-2.0] 1.5.42
ii dpkg 1.16.2
ii ghostscript 9.05~dfsg-4
ii libavahi-client3 0.6.31-1
ii libavahi-common3 0.6.31-1
ii libc6 2.13-27
ii libcups2 1.5.2-8
ii libcupscgi1 1.5.2-5
ii libcupsimage2 1.5.2-8
ii libcupsmime1 1.5.2-5
ii libcupsppdc1 1.5.2-5
ii libdbus-1-3 1.5.12-1
ii libgcc1 1:4.7.0-1
ii libgnutls26 2.12.18-1
ii libgssapi-krb5-2 1.10+dfsg~beta1-2
ii libkrb5-3 1.10+dfsg~beta1-2
ii libldap-2.4-2 2.4.28-1.1
ii libpam0g 1.1.3-7
ii libpaper1 1.1.24+nmu1
ii libslp1 1.2.1-9
ii libstdc++6 4.7.0-1
ii libusb-1.0-0 2:1.0.9~rc3-4
ii lsb-base 4.1+Debian0
ii poppler-utils 0.16.7-3
ii procps 1:3.3.2-3
ii ssl-cert 1.0.28
Versions of packages cups recommends:
ii avahi-daemon <none>
ii colord <none>
ii foomatic-filters 4.0.15-1
ii ghostscript-cups 9.05~dfsg-4
ii printer-driver-gutenprint [cups-driver-gutenprint] 5.2.7-5
Versions of packages cups suggests:
ii cups-bsd 1.5.2-5
ii cups-pdf <none>
ii foomatic-db-compressed-ppds | foomatic-db <none>
ii hplip <none>
ii smbclient 2:3.6.3-2
ii udev 175-3.1
-- Configuration Files:
/etc/cups/cupsd.conf [Errno 13] Keine Berechtigung: u'/etc/cups/cupsd.conf'
-- debconf information:
* cupsys/raw-print: false
* cupsys/backend: ipp, lpd, socket, usb, snmp, dnssd
--
Dr. Helge Kreutzmann deb...@helgefjell.de
Dipl.-Phys. http://www.helgefjell.de/debian.php
64bit GNU powered gpg signed mail preferred
Help keep free software "libre": http://www.ffii.de/
error_log.bz2
Description: Binary data
signature.asc
Description: Digital signature
