Date: Mon, 15 Apr 2013 10:43:25 +0200 Subject: Re: Debian on thecus N2100 From: [email protected] To: [email protected] CC: [email protected]
2013/4/11 Brian Platt <[email protected]> > Date: Wed, 10 Apr 2013 22:20:18 +0400 > From: [email protected] > To: [email protected] > Subject: Re: Debian on thecus N2100 > > On 10.04.2013 16:41, Brian Platt wrote: > > I'm tring to install debian on the Thecus N2100 using the instructions from > > http://www.cyrius.com/debian/iop/n2100/ however when formatting the > > partitions the bar goes up to > > 33% > Try another hdd model. Tried that maybe your RAM is damaged, try another one or to perform a memtest. ciao federico Finally got serial to work (ish) +RST=No Transfer to factory test Mode : No Reset default set:Normal Thecus: Found PCI device Vendor ID=0x0000FFFF Thecus: Found PCI device Vendor ID=0x000010EC Thecus: Found PCI device Vendor ID=0x0000FFFF Thecus: Found PCI device Vendor ID=0x0000FFFF No network interfaces found RedBoot(tm) bootstrap and debug environment [ROM] Red Hat certified release, version 1.93 - built 17:25:00, Feb 6 2007 Platform: THECUS N2100 (IOP80219) Copyright (C) 2000, 2001, 2002, Red Hat, Inc. RAM: 0x00000000-0x20000000, 0x0004b890-0x1ffd1000 available, total: 512 MB FLASH: 0xf0000000 - 0xf1000000, 128 blocks of 0x00020000 bytes each. == Executing boot script in 3.000 seconds - enter ^C to abort I would like to boot into redboot but when I do control c it' doesn't abort the boot?
