Hi, On Sun, Jan 03, 2010 at 10:25:36PM +0200, [email protected] wrote:
> So I go through the installation process but the "make system bootable" > section fails. Which Debian version did you install ? IRC, the Lenny d-i can't make this system bootable : the flash-kernel script doesn't recognized the platform to flash the kernel properly. You need at least Squeeze, or at least flash with the Squeeze script version donwloaded apart. > I have tried editing the boot script as follows: > > fis load ramdisk.gz > exec -c "console=ttyS0,115200 rw root=/dev/md0 mem=2...@0xa0000000" -r > 0x01800000 > > But this doesn't work as I assume it can't see the multi-disk > device. Strange, it sounds good. Mine was booted with almost the same : lothar:~# cat /proc/cmdline console=ttyS0,115200 rw root=/dev/md0 mem=2...@0xa0000000 > How do I update the zImage on the flash With the flash-kernel script. His purpose is to write the installed kernel on the flash to do normal boot. > or how do I get the boot loader to boot the zImage from the /dev/md0 > device? I believe that you can't :-/ AFAIK, this machine boots only from flash, with a kernel specialy crafted. The flash-script "wraps" the kernel in the zImage file with some bits needed for booting (the machine id). Hih, -- JFS. -- To UNSUBSCRIBE, email to [email protected] with a subject of "unsubscribe". Trouble? Contact [email protected]
