http://qa.mandrakesoft.com/show_bug.cgi?id=2181
------- Additional Comments From [EMAIL PROTECTED] 2003-03-09 00:29 ------- Problem still exists installing with RC2 The install hangs indefinately during install the following is displayed on the screen. Installing driver for Bus/Firewire Card Texas Instruments|TSB43AB21 IEEE-1394 Controller (PHY/Link) 1394a-2000 ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is. ------- Reminder: ------- assigned_to: [EMAIL PROTECTED] status: UNCONFIRMED creation_date: description: Beta 3 probed and found all hardware without incident here is the lspci from Beta 3 on the firewire. A full output can be supplied if needed. 02:02.0 FireWire (IEEE 1394): Texas Instruments TSB43AB21 IEEE-1394a-2000 Contro ller (PHY/Link) (prog-if 10 [OHCI]) Subsystem: CLEVO/KAPOK Computer: Unknown device 8880 Flags: bus master, medium devsel, latency 128, IRQ 11 Memory at d0000800 (32-bit, non-prefetchable) [size=2K] Memory at d0004000 (32-bit, non-prefetchable) [size=16K] Capabilities: [44] Power Management version 2 Using RC1 the machine locks up when probing the firewire port. It see the firewire as the TI version but hangs. The machine is a Sager 8886 laptop, P4 Intel processor. Sager is manufactured by Clevo/Kapok the Clevo model number is 888E
