> Date: Tue, 04 Sep 2007 07:20:01 +0200 > From: Johann Steinwendtner <[EMAIL PROTECTED]> > Subject: Re: [Callweaver-dev] dsp.c, silence and dialtone detection > To: Developers Mailing List <[email protected]> > Message-ID: <[EMAIL PROTECTED]> > Content-Type: text/plain; charset=ISO-8859-1; format=flowed > > Oliver Wilcock wrote: >>>> A dialtone signal is the best the Meridian can do with the hardware I >>>> have. I discovered the dialtone workaround in Cisco documentation. >>>> >>> Actually, a Merdian can be configured to do a wide range of things. >>> Figuring out just how can be the problem. :-) >> >> I'll agree that figuring out how can be a problem. The phone service >> company told me there was nothing. I turned to the Internet and found >> the >> dialtone method. There are analog station modules for the Meridian that >> do better, I just don't have one. >> > Disconnect tone for Meridian 1: > Load overlay 56 and change TLP (Tone to last party) to the same > behaviour as you have for BUSY. Also cange TLPT to a value non zero > (It is the time how long this tone is played) > > Regards > > Hans
Thanks for the suggestion Hans. Perhaps I don't have the necessary software revision. I don't see TLP under ld 56. As you can probably tell I don't know much about it. ld 22 says: PT2000 REQ iss CALL SERVER/MAIN CAB VERSION 2121 RELEASE 3 ISSUE 00 + IDLE_SET_DISPLAY NORTEL _______________________________________________ Callweaver-dev mailing list [email protected] http://lists.callweaver.org/mailman/listinfo/callweaver-dev
