Niels Terp wrote: > wlan0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 metric 1 > inet 192.168.0.13 netmask 255.255.255.0 broadcast > 192.168.0.255
Seeing this, I would conclude that wpa_supplicant and dhclient wlan0 work fine. What is your problem ? Pierre The problem is, that when I start the wpa_supplicant program (and an icon was automatically installed in the notification area), the program opens OK, but only displays Status: Could not get status from wpa_supplicant. Apart from that, the program seems "dead", I cannot select adapter or network (the dropdown menus does not open), I cannot scan for AP's ( the scanning window opens, but nothing happens when I clik "Scan", and the "Manage Networks" tab is empty. It SEEMS that the connection to my AP is made on boot, and I can start a remote SSH session on that IP. But as soon I remove my network cable, the connection stops working. Hope this clarifies. Niels -- http://linuxfromscratch.org/mailman/listinfo/blfs-support FAQ: http://www.linuxfromscratch.org/blfs/faq.html Unsubscribe: See the above information page
