I just started trying to use xorg-server 1.18.0, but everytime I start
it, the keyboard and mouse are unresponsive, and Xorg.0.log says it
could not find any input drivers. I have xf86-input-evdev, version
2.10.0, built against xorg-server 1.18.0, and located at
/usr/lib/xorg/modules/input/evdev_drv.so. I have X with xorg-server
1.17.4 running fine at the moment - I used the same build commands for
the server and drivers, and the same driver versions, the only thing I
changed was the version of xorg-server. I did also try installing
libinput and xcb-util-cursor, in case those might be somehow needed by
the new xorg-server, but that didn't help.
I am running a current CLFS dev systemd system, though without PAM so X
should not be trying to use systemd-logind, and the log files for both
xorg-server versions do say it's not being used.
I've attached the Xorg log file from my attempt at running xorg-server
1.18.0, and, for comparison, my log for my currently-working 1.17.4 X
session.
[ 423.047]
X.Org X Server 1.18.0
Release Date: 2015-11-09
[ 423.050] X Protocol Version 11, Revision 0
[ 423.051] Build Operating System: Linux 4.1.13 x86_64
[ 423.052] Current Operating System: Linux Dell_Inspiron 4.1.13 #1 SMP Mon
Nov 23 02:17:46 EST 2015 x86_64
[ 423.052] Kernel command line: BOOT_IMAGE=/linux-4.1.13-112315
root=/dev/sda2 ro
[ 423.055] Build Date: 23 November 2015 11:22:54AM
[ 423.056]
[ 423.057] Current version of pixman: 0.32.8
[ 423.059] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 423.059] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 423.063] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Nov 23 11:24:30
2015
[ 423.065] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 423.066] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 423.066] (==) No Layout section. Using the first Screen section.
[ 423.066] (==) No screen section available. Using defaults.
[ 423.066] (**) |-->Screen "Default Screen Section" (0)
[ 423.066] (**) | |-->Monitor "<default monitor>"
[ 423.066] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 423.066] (**) | |-->Device "Device0"
[ 423.066] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 423.066] (==) Automatically adding devices
[ 423.066] (==) Automatically enabling devices
[ 423.066] (==) Automatically adding GPU devices
[ 423.066] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 423.066] (WW) `fonts.dir' not found (or not valid) in
"/usr/share/fonts/X11/100dpi/".
[ 423.066] Entry deleted from font path.
[ 423.066] (Run 'mkfontdir' on "/usr/share/fonts/X11/100dpi/").
[ 423.066] (WW) `fonts.dir' not found (or not valid) in
"/usr/share/fonts/X11/75dpi/".
[ 423.066] Entry deleted from font path.
[ 423.066] (Run 'mkfontdir' on "/usr/share/fonts/X11/75dpi/").
[ 423.066] (==) FontPath set to:
/usr/share/fonts/X11/misc/,
/usr/share/fonts/X11/TTF/,
/usr/share/fonts/X11/OTF/,
/usr/share/fonts/X11/Type1/
[ 423.066] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 423.066] (II) The server relies on udev to provide the list of input
devices.
If no devices become available, reconfigure udev or disable
AutoAddDevices.
[ 423.066] (II) Loader magic: 0x80af60
[ 423.066] (II) Module ABI versions:
[ 423.066] X.Org ANSI C Emulation: 0.4
[ 423.066] X.Org Video Driver: 20.0
[ 423.066] X.Org XInput driver : 22.1
[ 423.066] X.Org Server Extension : 9.0
[ 423.066] (--) using VT number 3
[ 423.067] (II) systemd-logind: logind integration requires -keeptty and
-keeptty was not provided, disabling logind integration
[ 423.067] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 423.068] (--) PCI:*(0:0:2:0) 8086:0152:1028:0581 rev 9, Mem @
0xf7800000/4194304, 0xe0000000/268435456, I/O @ 0x0000f000/64
[ 423.068] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or
directory)
[ 423.068] (II) LoadModule: "glx"
[ 423.068] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 423.069] (II) Module glx: vendor="X.Org Foundation"
[ 423.069] compiled for 1.18.0, module version = 1.0.0
[ 423.069] ABI class: X.Org Server Extension, version 9.0
[ 423.069] (==) AIGLX enabled
[ 423.069] (II) LoadModule: "intel"
[ 423.070] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 423.070] (II) Module intel: vendor="X.Org Foundation"
[ 423.070] compiled for 1.18.0, module version = 2.99.917
[ 423.070] Module class: X.Org Video Driver
[ 423.070] ABI class: X.Org Video Driver, version 20.0
[ 423.070] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 423.070] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
[ 423.070] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
[ 423.070] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200,
P6300
[ 423.073] (II) intel(0): Creating default Display subsection in Screen
section
"Default Screen Section" for depth/fbbpp 24/32
[ 423.073] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 423.073] (==) intel(0): RGB weight 888
[ 423.073] (==) intel(0): Default visual is TrueColor
[ 423.073] (**) intel(0): Option "AccelMethod" "uxa"
[ 423.073] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics
2500
[ 423.073] (**) intel(0): Relaxed fencing enabled
[ 423.073] (**) intel(0): Wait on SwapBuffers? enabled
[ 423.073] (**) intel(0): Triple buffering? enabled
[ 423.073] (**) intel(0): Framebuffer tiled
[ 423.073] (**) intel(0): Pixmaps tiled
[ 423.073] (**) intel(0): 3D buffers tiled
[ 423.073] (**) intel(0): SwapBuffers wait enabled
[ 423.073] (==) intel(0): video overlay key set to 0x101fe
[ 423.086] (II) intel(0): Output VGA1 has no monitor section
[ 423.086] (II) intel(0): Output HDMI1 has no monitor section
[ 423.086] (II) intel(0): Output DP1 has no monitor section
[ 423.099] (II) intel(0): EDID for output VGA1
[ 423.099] (II) intel(0): Manufacturer: DEL Model: f03c Serial#: 810955341
[ 423.099] (II) intel(0): Year: 2013 Week: 3
[ 423.099] (II) intel(0): EDID Version: 1.3
[ 423.099] (II) intel(0): Analog Display Input, Input Voltage Level:
0.700/0.300 V
[ 423.099] (II) intel(0): Sync: Separate Composite SyncOnGreen
[ 423.099] (II) intel(0): Max Image Size [cm]: horiz.: 44 vert.: 25
[ 423.099] (II) intel(0): Gamma: 2.20
[ 423.099] (II) intel(0): DPMS capabilities: StandBy Suspend Off; RGB/Color
Display
[ 423.099] (II) intel(0): First detailed timing is preferred mode
[ 423.099] (II) intel(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY:
0.600
[ 423.099] (II) intel(0): blueX: 0.150 blueY: 0.060 whiteX: 0.313 whiteY:
0.329
[ 423.099] (II) intel(0): Supported established timings:
[ 423.099] (II) intel(0): 720x400@70Hz
[ 423.099] (II) intel(0): 640x480@60Hz
[ 423.099] (II) intel(0): 640x480@75Hz
[ 423.099] (II) intel(0): 800x600@60Hz
[ 423.099] (II) intel(0): 800x600@75Hz
[ 423.099] (II) intel(0): 1024x768@60Hz
[ 423.099] (II) intel(0): 1024x768@75Hz
[ 423.099] (II) intel(0): 1280x1024@75Hz
[ 423.099] (II) intel(0): Manufacturer's mask: 0
[ 423.099] (II) intel(0): Supported standard timings:
[ 423.099] (II) intel(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 423.099] (II) intel(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 423.099] (II) intel(0): #2: hsize: 1600 vsize 900 refresh: 60 vid: 49321
[ 423.099] (II) intel(0): Supported detailed timing:
[ 423.099] (II) intel(0): clock: 97.8 MHz Image Size: 443 x 249 mm
[ 423.099] (II) intel(0): h_active: 1600 h_sync: 1648 h_sync_end 1680
h_blank_end 1760 h_border: 0
[ 423.099] (II) intel(0): v_active: 900 v_sync: 903 v_sync_end 908
v_blanking: 926 v_border: 0
[ 423.099] (II) intel(0): Serial No: MK7Y431J0V2M
[ 423.099] (II) intel(0): Monitor name: DELL IN2030M
[ 423.099] (II) intel(0): Ranges: V min: 56 V max: 76 Hz, H min: 30 H max: 83
kHz, PixClock max 175 MHz
[ 423.099] (II) intel(0): EDID (in hex):
[ 423.099] (II) intel(0): 00ffffffffffff0010ac3cf04d325630
[ 423.099] (II) intel(0): 031701030e2c1978eaee95a3544c9926
[ 423.099] (II) intel(0): 0f5054a54b00714f8180a9c001010101
[ 423.099] (II) intel(0): 0101010101012f2640a060841a303020
[ 423.099] (II) intel(0): 3500bbf91000001a000000ff004d4b37
[ 423.099] (II) intel(0): 593433314a3056324d0a000000fc0044
[ 423.099] (II) intel(0): 454c4c20494e323033304d0a000000fd
[ 423.099] (II) intel(0): 00384c1e5311000a202020202020004f
[ 423.099] (II) intel(0): Printing probed modes for output VGA1
[ 423.099] (II) intel(0): Modeline "1600x900"x60.0 97.75 1600 1648 1680
1760 900 903 908 926 +hsync -vsync (55.5 kHz eP)
[ 423.099] (II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440
1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 423.099] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440
1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 423.099] (II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344
1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 423.099] (II) intel(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136
1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
[ 423.099] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184
1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 423.099] (II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056
600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 423.099] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056
600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 423.099] (II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840
480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 423.099] (II) intel(0): Modeline "640x480"x60.0 25.20 640 656 752 800
480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 423.099] (II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900
400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 423.100] (II) intel(0): EDID for output HDMI1
[ 423.100] (II) intel(0): EDID for output DP1
[ 423.100] (II) intel(0): Output VGA1 connected
[ 423.100] (II) intel(0): Output HDMI1 disconnected
[ 423.100] (II) intel(0): Output DP1 disconnected
[ 423.100] (II) intel(0): Using exact sizes for initial modes
[ 423.100] (II) intel(0): Output VGA1 using initial mode 1600x900 +0+0
[ 423.100] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless
otherwise stated.
[ 423.100] (II) intel(0): Kernel page flipping support detected, enabling
[ 423.100] (==) intel(0): DPI set to (96, 96)
[ 423.100] (II) Loading sub module "fb"
[ 423.100] (II) LoadModule: "fb"
[ 423.100] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 423.100] (II) Module fb: vendor="X.Org Foundation"
[ 423.100] compiled for 1.18.0, module version = 1.0.0
[ 423.100] ABI class: X.Org ANSI C Emulation, version 0.4
[ 423.100] (II) Loading sub module "dri2"
[ 423.100] (II) LoadModule: "dri2"
[ 423.100] (II) Module "dri2" already built-in
[ 423.100] (==) Depth 24 pixmap format is 32 bpp
[ 423.100] (II) intel(0): Allocated new frame buffer 1600x900 stride 6656,
tiled
[ 423.101] (II) UXA(0): Driver registered support for the following
operations:
[ 423.101] (II) solid
[ 423.101] (II) copy
[ 423.101] (II) composite (RENDER acceleration)
[ 423.101] (II) put_image
[ 423.101] (II) get_image
[ 423.101] (II) intel(0): [DRI2] Setup complete
[ 423.101] (II) intel(0): [DRI2] DRI driver: i965
[ 423.101] (II) intel(0): [DRI2] VDPAU driver: va_gl
[ 423.101] (==) intel(0): Backing store enabled
[ 423.101] (==) intel(0): Silken mouse enabled
[ 423.101] (II) intel(0): Initializing HW Cursor
[ 423.101] (II) intel(0): RandR 1.2 enabled, ignore the following RandR
disabled message.
[ 423.101] (==) intel(0): DPMS enabled
[ 423.101] (==) intel(0): Intel XvMC decoder enabled
[ 423.101] (II) intel(0): Set up textured video
[ 423.101] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[ 423.101] (II) intel(0): DRI2: Enabled
[ 423.101] (II) intel(0): DRI3: Disabled
[ 423.101] (==) intel(0): hotplug detection: "enabled"
[ 423.115] (--) RandR disabled
[ 423.125] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 423.125] (II) AIGLX: enabled GLX_ARB_create_context
[ 423.125] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 423.125] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 423.125] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 423.125] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 423.125] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 423.125] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 423.125] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 423.125] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[ 423.126] (II) AIGLX: Loaded and initialized i965
[ 423.126] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 423.126] (II) intel(0): Setting screen physical size to 423 x 238
[ 423.227] (II) config/udev: Adding input device Power Button
(/dev/input/event1)
[ 423.227] (II) No input driver specified, ignoring this device.
[ 423.227] (II) This device may have been added with another device file.
[ 423.227] (II) config/udev: Adding input device Video Bus (/dev/input/event2)
[ 423.227] (II) No input driver specified, ignoring this device.
[ 423.227] (II) This device may have been added with another device file.
[ 423.227] (II) config/udev: Adding input device Power Button
(/dev/input/event0)
[ 423.227] (II) No input driver specified, ignoring this device.
[ 423.227] (II) This device may have been added with another device file.
[ 423.227] (II) config/udev: Adding input device Logitech USB Receiver
(/dev/input/event3)
[ 423.227] (**) Logitech USB Receiver: Applying InputClass "middle button
emulation class"
[ 423.227] (II) No input driver specified, ignoring this device.
[ 423.227] (II) This device may have been added with another device file.
[ 423.228] (II) config/udev: Adding input device Logitech USB Receiver
(/dev/input/mouse0)
[ 423.228] (**) Logitech USB Receiver: Applying InputClass "middle button
emulation class"
[ 423.228] (II) No input driver specified, ignoring this device.
[ 423.228] (II) This device may have been added with another device file.
[ 423.228] (II) config/udev: Adding input device Logitech USB Receiver
(/dev/input/event4)
[ 423.228] (II) No input driver specified, ignoring this device.
[ 423.228] (II) This device may have been added with another device file.
[ 423.228] (II) config/udev: Adding input device Logitech USB Receiver
(/dev/input/event5)
[ 423.228] (**) Logitech USB Receiver: Applying InputClass "middle button
emulation class"
[ 423.228] (II) No input driver specified, ignoring this device.
[ 423.228] (II) This device may have been added with another device file.
[ 423.229] (II) config/udev: Adding input device Logitech USB Receiver
(/dev/input/mouse1)
[ 423.229] (**) Logitech USB Receiver: Applying InputClass "middle button
emulation class"
[ 423.229] (II) No input driver specified, ignoring this device.
[ 423.229] (II) This device may have been added with another device file.
[ 428.064] (II) Server terminated successfully (0). Closing log file.
[ 11.976]
X.Org X Server 1.17.4
Release Date: 2015-10-28
[ 11.976] X Protocol Version 11, Revision 0
[ 11.976] Build Operating System: Linux 4.1.13 x86_64
[ 11.976] Current Operating System: Linux Dell_Inspiron 4.1.13 #1 SMP Fri
Nov 20 07:04:51 EST 2015 x86_64
[ 11.976] Kernel command line: BOOT_IMAGE=/linux-4.1.13-112115
root=/dev/sda3 ro
[ 11.976] Build Date: 22 November 2015 10:15:25PM
[ 11.976]
[ 11.976] Current version of pixman: 0.32.8
[ 11.976] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 11.976] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 11.976] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Nov 23 11:25:39
2015
[ 11.990] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 11.990] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 12.029] (==) No Layout section. Using the first Screen section.
[ 12.029] (==) No screen section available. Using defaults.
[ 12.029] (**) |-->Screen "Default Screen Section" (0)
[ 12.029] (**) | |-->Monitor "<default monitor>"
[ 12.029] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 12.029] (**) | |-->Device "Device0"
[ 12.029] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 12.029] (==) Automatically adding devices
[ 12.029] (==) Automatically enabling devices
[ 12.029] (==) Automatically adding GPU devices
[ 12.062] (WW) `fonts.dir' not found (or not valid) in
"/usr/share/fonts/X11/100dpi/".
[ 12.062] Entry deleted from font path.
[ 12.062] (Run 'mkfontdir' on "/usr/share/fonts/X11/100dpi/").
[ 12.062] (WW) `fonts.dir' not found (or not valid) in
"/usr/share/fonts/X11/75dpi/".
[ 12.062] Entry deleted from font path.
[ 12.062] (Run 'mkfontdir' on "/usr/share/fonts/X11/75dpi/").
[ 12.062] (==) FontPath set to:
/usr/share/fonts/X11/misc/,
/usr/share/fonts/X11/TTF/,
/usr/share/fonts/X11/OTF/,
/usr/share/fonts/X11/Type1/
[ 12.062] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 12.062] (II) The server relies on udev to provide the list of input
devices.
If no devices become available, reconfigure udev or disable
AutoAddDevices.
[ 12.062] (II) Loader magic: 0x808b60
[ 12.062] (II) Module ABI versions:
[ 12.062] X.Org ANSI C Emulation: 0.4
[ 12.062] X.Org Video Driver: 19.0
[ 12.062] X.Org XInput driver : 21.0
[ 12.062] X.Org Server Extension : 9.0
[ 12.063] (EE) systemd-logind: failed to get session: PID 316 does not
belong to any known session
[ 12.063] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 12.064] (--) PCI:*(0:0:2:0) 8086:0152:1028:0581 rev 9, Mem @
0xf7800000/4194304, 0xe0000000/268435456, I/O @ 0x0000f000/64
[ 12.064] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or
directory)
[ 12.065] (II) LoadModule: "glx"
[ 12.092] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 12.162] (II) Module glx: vendor="X.Org Foundation"
[ 12.162] compiled for 1.17.4, module version = 1.0.0
[ 12.162] ABI class: X.Org Server Extension, version 9.0
[ 12.162] (==) AIGLX enabled
[ 12.162] (II) LoadModule: "intel"
[ 12.173] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 12.203] (II) Module intel: vendor="X.Org Foundation"
[ 12.203] compiled for 1.17.4, module version = 2.99.917
[ 12.203] Module class: X.Org Video Driver
[ 12.203] ABI class: X.Org Video Driver, version 19.0
[ 12.203] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 12.203] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
[ 12.203] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
[ 12.203] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200,
P6300
[ 12.203] (--) using VT number 2
[ 12.207] (II) intel(0): Creating default Display subsection in Screen
section
"Default Screen Section" for depth/fbbpp 24/32
[ 12.207] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 12.207] (==) intel(0): RGB weight 888
[ 12.207] (==) intel(0): Default visual is TrueColor
[ 12.207] (**) intel(0): Option "AccelMethod" "uxa"
[ 12.207] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics
2500
[ 12.207] (**) intel(0): Relaxed fencing enabled
[ 12.207] (**) intel(0): Wait on SwapBuffers? enabled
[ 12.207] (**) intel(0): Triple buffering? enabled
[ 12.207] (**) intel(0): Framebuffer tiled
[ 12.207] (**) intel(0): Pixmaps tiled
[ 12.207] (**) intel(0): 3D buffers tiled
[ 12.207] (**) intel(0): SwapBuffers wait enabled
[ 12.207] (==) intel(0): video overlay key set to 0x101fe
[ 12.220] (II) intel(0): Output VGA1 has no monitor section
[ 12.220] (II) intel(0): Output HDMI1 has no monitor section
[ 12.220] (II) intel(0): Output DP1 has no monitor section
[ 12.233] (II) intel(0): EDID for output VGA1
[ 12.233] (II) intel(0): Manufacturer: DEL Model: f03c Serial#: 810955341
[ 12.233] (II) intel(0): Year: 2013 Week: 3
[ 12.233] (II) intel(0): EDID Version: 1.3
[ 12.233] (II) intel(0): Analog Display Input, Input Voltage Level:
0.700/0.300 V
[ 12.233] (II) intel(0): Sync: Separate Composite SyncOnGreen
[ 12.233] (II) intel(0): Max Image Size [cm]: horiz.: 44 vert.: 25
[ 12.233] (II) intel(0): Gamma: 2.20
[ 12.233] (II) intel(0): DPMS capabilities: StandBy Suspend Off; RGB/Color
Display
[ 12.233] (II) intel(0): First detailed timing is preferred mode
[ 12.233] (II) intel(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY:
0.600
[ 12.233] (II) intel(0): blueX: 0.150 blueY: 0.060 whiteX: 0.313 whiteY:
0.329
[ 12.233] (II) intel(0): Supported established timings:
[ 12.233] (II) intel(0): 720x400@70Hz
[ 12.233] (II) intel(0): 640x480@60Hz
[ 12.233] (II) intel(0): 640x480@75Hz
[ 12.233] (II) intel(0): 800x600@60Hz
[ 12.233] (II) intel(0): 800x600@75Hz
[ 12.233] (II) intel(0): 1024x768@60Hz
[ 12.233] (II) intel(0): 1024x768@75Hz
[ 12.233] (II) intel(0): 1280x1024@75Hz
[ 12.233] (II) intel(0): Manufacturer's mask: 0
[ 12.233] (II) intel(0): Supported standard timings:
[ 12.233] (II) intel(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 12.233] (II) intel(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 12.233] (II) intel(0): #2: hsize: 1600 vsize 900 refresh: 60 vid: 49321
[ 12.233] (II) intel(0): Supported detailed timing:
[ 12.233] (II) intel(0): clock: 97.8 MHz Image Size: 443 x 249 mm
[ 12.233] (II) intel(0): h_active: 1600 h_sync: 1648 h_sync_end 1680
h_blank_end 1760 h_border: 0
[ 12.233] (II) intel(0): v_active: 900 v_sync: 903 v_sync_end 908
v_blanking: 926 v_border: 0
[ 12.233] (II) intel(0): Serial No: MK7Y431J0V2M
[ 12.233] (II) intel(0): Monitor name: DELL IN2030M
[ 12.233] (II) intel(0): Ranges: V min: 56 V max: 76 Hz, H min: 30 H max: 83
kHz, PixClock max 175 MHz
[ 12.233] (II) intel(0): EDID (in hex):
[ 12.233] (II) intel(0): 00ffffffffffff0010ac3cf04d325630
[ 12.233] (II) intel(0): 031701030e2c1978eaee95a3544c9926
[ 12.234] (II) intel(0): 0f5054a54b00714f8180a9c001010101
[ 12.234] (II) intel(0): 0101010101012f2640a060841a303020
[ 12.234] (II) intel(0): 3500bbf91000001a000000ff004d4b37
[ 12.234] (II) intel(0): 593433314a3056324d0a000000fc0044
[ 12.234] (II) intel(0): 454c4c20494e323033304d0a000000fd
[ 12.234] (II) intel(0): 00384c1e5311000a202020202020004f
[ 12.234] (II) intel(0): Printing probed modes for output VGA1
[ 12.234] (II) intel(0): Modeline "1600x900"x60.0 97.75 1600 1648 1680
1760 900 903 908 926 +hsync -vsync (55.5 kHz eP)
[ 12.234] (II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440
1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 12.234] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440
1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 12.234] (II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344
1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 12.234] (II) intel(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136
1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
[ 12.234] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184
1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 12.234] (II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056
600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 12.234] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056
600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 12.234] (II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840
480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 12.234] (II) intel(0): Modeline "640x480"x60.0 25.20 640 656 752 800
480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 12.234] (II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900
400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 12.234] (II) intel(0): EDID for output HDMI1
[ 12.234] (II) intel(0): EDID for output DP1
[ 12.234] (II) intel(0): Output VGA1 connected
[ 12.234] (II) intel(0): Output HDMI1 disconnected
[ 12.234] (II) intel(0): Output DP1 disconnected
[ 12.234] (II) intel(0): Using exact sizes for initial modes
[ 12.234] (II) intel(0): Output VGA1 using initial mode 1600x900
[ 12.234] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless
otherwise stated.
[ 12.234] (II) intel(0): Kernel page flipping support detected, enabling
[ 12.234] (==) intel(0): DPI set to (96, 96)
[ 12.234] (II) Loading sub module "fb"
[ 12.234] (II) LoadModule: "fb"
[ 12.234] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 12.242] (II) Module fb: vendor="X.Org Foundation"
[ 12.242] compiled for 1.17.4, module version = 1.0.0
[ 12.242] ABI class: X.Org ANSI C Emulation, version 0.4
[ 12.242] (II) Loading sub module "dri2"
[ 12.242] (II) LoadModule: "dri2"
[ 12.242] (II) Module "dri2" already built-in
[ 12.242] (==) Depth 24 pixmap format is 32 bpp
[ 12.242] (II) intel(0): Allocated new frame buffer 1600x900 stride 6656,
tiled
[ 12.244] (II) UXA(0): Driver registered support for the following
operations:
[ 12.244] (II) solid
[ 12.244] (II) copy
[ 12.244] (II) composite (RENDER acceleration)
[ 12.244] (II) put_image
[ 12.244] (II) get_image
[ 12.244] (II) intel(0): [DRI2] Setup complete
[ 12.244] (II) intel(0): [DRI2] DRI driver: i965
[ 12.244] (II) intel(0): [DRI2] VDPAU driver: va_gl
[ 12.244] (==) intel(0): Backing store enabled
[ 12.244] (==) intel(0): Silken mouse enabled
[ 12.255] (II) intel(0): Initializing HW Cursor
[ 12.255] (II) intel(0): RandR 1.2 enabled, ignore the following RandR
disabled message.
[ 12.262] (==) intel(0): DPMS enabled
[ 12.262] (==) intel(0): Intel XvMC decoder enabled
[ 12.262] (II) intel(0): Set up textured video
[ 12.262] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[ 12.262] (II) intel(0): DRI2: Enabled
[ 12.262] (II) intel(0): DRI3: Disabled
[ 12.262] (==) intel(0): hotplug detection: "enabled"
[ 12.272] (--) RandR disabled
[ 12.395] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 12.395] (II) AIGLX: enabled GLX_ARB_create_context
[ 12.395] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 12.395] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 12.395] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 12.395] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 12.395] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 12.395] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 12.395] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 12.395] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[ 12.395] (II) AIGLX: Loaded and initialized i965
[ 12.395] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 12.395] (II) intel(0): Setting screen physical size to 423 x 238
[ 12.636] (II) config/udev: Adding input device Power Button
(/dev/input/event1)
[ 12.636] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 12.636] (II) LoadModule: "evdev"
[ 12.636] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 12.651] (II) Module evdev: vendor="X.Org Foundation"
[ 12.651] compiled for 1.17.4, module version = 2.10.0
[ 12.651] Module class: X.Org XInput Driver
[ 12.651] ABI class: X.Org XInput driver, version 21.0
[ 12.651] (II) Using input driver 'evdev' for 'Power Button'
[ 12.651] (**) Power Button: always reports core events
[ 12.651] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 12.651] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 12.651] (--) evdev: Power Button: Found keys
[ 12.651] (II) evdev: Power Button: Configuring as keyboard
[ 12.651] (**) Option "config_info"
"udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[ 12.651] (II) XINPUT: Adding extended input device "Power Button" (type:
KEYBOARD, id 6)
[ 12.651] (**) Option "xkb_rules" "evdev"
[ 12.652] (II) config/udev: Adding input device Video Bus (/dev/input/event2)
[ 12.652] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 12.652] (II) Using input driver 'evdev' for 'Video Bus'
[ 12.652] (**) Video Bus: always reports core events
[ 12.652] (**) evdev: Video Bus: Device: "/dev/input/event2"
[ 12.652] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 12.652] (--) evdev: Video Bus: Found keys
[ 12.652] (II) evdev: Video Bus: Configuring as keyboard
[ 12.652] (**) Option "config_info"
"udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input2/event2"
[ 12.652] (II) XINPUT: Adding extended input device "Video Bus" (type:
KEYBOARD, id 7)
[ 12.652] (**) Option "xkb_rules" "evdev"
[ 12.652] (II) config/udev: Adding input device Power Button
(/dev/input/event0)
[ 12.652] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 12.652] (II) Using input driver 'evdev' for 'Power Button'
[ 12.652] (**) Power Button: always reports core events
[ 12.652] (**) evdev: Power Button: Device: "/dev/input/event0"
[ 12.652] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 12.652] (--) evdev: Power Button: Found keys
[ 12.652] (II) evdev: Power Button: Configuring as keyboard
[ 12.652] (**) Option "config_info"
"udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[ 12.652] (II) XINPUT: Adding extended input device "Power Button" (type:
KEYBOARD, id 8)
[ 12.652] (**) Option "xkb_rules" "evdev"
[ 12.653] (II) config/udev: Adding input device Logitech USB Receiver
(/dev/input/event3)
[ 12.653] (**) Logitech USB Receiver: Applying InputClass "evdev pointer
catchall"
[ 12.653] (**) Logitech USB Receiver: Applying InputClass "middle button
emulation class"
[ 12.653] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 12.653] (**) Logitech USB Receiver: always reports core events
[ 12.653] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event3"
[ 12.653] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc510
[ 12.653] (--) evdev: Logitech USB Receiver: Found 20 mouse buttons
[ 12.653] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[ 12.653] (--) evdev: Logitech USB Receiver: Found relative axes
[ 12.653] (--) evdev: Logitech USB Receiver: Found x and y relative axes
[ 12.653] (II) evdev: Logitech USB Receiver: Configuring as mouse
[ 12.653] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[ 12.653] (**) Option "Emulate3Buttons" "on"
[ 12.653] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[ 12.653] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4,
EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 12.653] (**) Option "config_info"
"udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:046D:C510.0001/input/input6/event3"
[ 12.653] (II) XINPUT: Adding extended input device "Logitech USB Receiver"
(type: MOUSE, id 9)
[ 12.653] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[ 12.653] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[ 12.653] (**) Logitech USB Receiver: (accel) acceleration profile 0
[ 12.653] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[ 12.653] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[ 12.653] (II) config/udev: Adding input device Logitech USB Receiver
(/dev/input/mouse0)
[ 12.653] (**) Logitech USB Receiver: Applying InputClass "middle button
emulation class"
[ 12.654] (II) No input driver specified, ignoring this device.
[ 12.654] (II) This device may have been added with another device file.
[ 12.654] (II) config/udev: Adding input device Logitech USB Receiver
(/dev/input/event4)
[ 12.654] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard
catchall"
[ 12.654] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 12.654] (**) Logitech USB Receiver: always reports core events
[ 12.654] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event4"
[ 12.654] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc52b
[ 12.654] (--) evdev: Logitech USB Receiver: Found keys
[ 12.654] (II) evdev: Logitech USB Receiver: Configuring as keyboard
[ 12.654] (**) Option "config_info"
"udev:/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.6/4-1.6:1.0/0003:046D:C52B.0002/input/input7/event4"
[ 12.654] (II) XINPUT: Adding extended input device "Logitech USB Receiver"
(type: KEYBOARD, id 10)
[ 12.654] (**) Option "xkb_rules" "evdev"
[ 12.654] (II) config/udev: Adding input device Logitech USB Receiver
(/dev/input/event5)
[ 12.654] (**) Logitech USB Receiver: Applying InputClass "evdev pointer
catchall"
[ 12.654] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard
catchall"
[ 12.654] (**) Logitech USB Receiver: Applying InputClass "middle button
emulation class"
[ 12.654] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 12.654] (**) Logitech USB Receiver: always reports core events
[ 12.654] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event5"
[ 12.654] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc52b
[ 12.654] (--) evdev: Logitech USB Receiver: Found 20 mouse buttons
[ 12.654] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[ 12.654] (--) evdev: Logitech USB Receiver: Found relative axes
[ 12.654] (--) evdev: Logitech USB Receiver: Found x and y relative axes
[ 12.654] (--) evdev: Logitech USB Receiver: Found absolute axes
[ 12.654] (II) evdev: Logitech USB Receiver: Forcing absolute x/y axes to
exist.
[ 12.655] (--) evdev: Logitech USB Receiver: Found keys
[ 12.655] (II) evdev: Logitech USB Receiver: Configuring as mouse
[ 12.655] (II) evdev: Logitech USB Receiver: Configuring as keyboard
[ 12.655] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[ 12.655] (**) Option "Emulate3Buttons" "on"
[ 12.655] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[ 12.655] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4,
EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 12.655] (**) Option "config_info"
"udev:/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.6/4-1.6:1.1/0003:046D:C52B.0003/input/input8/event5"
[ 12.655] (II) XINPUT: Adding extended input device "Logitech USB Receiver"
(type: KEYBOARD, id 11)
[ 12.655] (**) Option "xkb_rules" "evdev"
[ 12.655] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[ 12.655] (WW) evdev: Logitech USB Receiver: ignoring absolute axes.
[ 12.655] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[ 12.655] (**) Logitech USB Receiver: (accel) acceleration profile 0
[ 12.655] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[ 12.655] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[ 12.655] (II) config/udev: Adding input device Logitech USB Receiver
(/dev/input/mouse1)
[ 12.655] (**) Logitech USB Receiver: Applying InputClass "middle button
emulation class"
[ 12.655] (II) No input driver specified, ignoring this device.
[ 12.655] (II) This device may have been added with another device file.
--
http://lists.linuxfromscratch.org/listinfo/blfs-dev
FAQ: http://www.linuxfromscratch.org/blfs/faq.html
Unsubscribe: See the above information page
