On 2012/12/14 14:49, Eugen Leitl wrote: > On Fri, Dec 14, 2012 at 12:10:43AM +0000, Lux, Jim (337C) wrote: >> What's interesting about this is system is that it is a good illustration >> that there's a lot more expense and hassle than selecting the motherboard. >> >> While the RPI might only be $35, you also have to buy a SD card ($10-12) >> power supplies, cables, boxes or mounting hardware, not to mention a network >> switch, etc. When you are looking at rock bottom price points, small things >> like the cost of the plug strip you plug it all into can be a significant >> fraction of the total. If you're making a cluster out of $1000-2000 nodes >> in a rack, you can ignore things like the network cable or power cord cost, >> because they're in the $1-2 range, but if your computer costs $30, then a $1 >> network cable is a 3% increase in price. >> >> All of that might actually equal or exceed the cost of the processor. >> >> You might be better off getting a stack of inexpensive netbooks or low end >> PCs.. A bit of casual googling shows that there are quite a few netbooks out >> there in the under $100 category (odd brands, it is true) (heck, I found one >> place offering refurbished netbooks for $45 each.. ) Move up to the >> $150-200 price range and there's literally hundreds of major brand units >> available. > For a "toy" Beowulf it might be worthwhile to wait for the Parallella > Epiphany. > > P.S. SDK is already out, to a select audiience > _______________________________________________ > Beowulf mailing list, Beowulf@beowulf.org sponsored by Penguin Computing > To change your subscription (digest mode or unsubscribe) visit > http://www.beowulf.org/mailman/listinfo/beowulf Hi all,
Thanks for the information. I would like to set up RPi cluster for some bioinformatics jobs like sequences alignment and sequences operations. And I would use OGS(Open Grid Scheduler) as DRM to manage those nodes. I do know that ARM processors cannot provide powerful FP computing so I'm guessing that would be feasible to do some sequences operations. Pls. point me out if I was wrong. One more thing, I would like to know what field is proper for ARM processors. Thanks. _______________________________________________ Beowulf mailing list, Beowulf@beowulf.org sponsored by Penguin Computing To change your subscription (digest mode or unsubscribe) visit http://www.beowulf.org/mailman/listinfo/beowulf