On Thu, Aug 20, 2020 at 9:06 AM Pavel Yermolenko <[email protected]> wrote: > > That ip address is typically the default for both USB and eth0. > > Not in my case: > > debian@beaglebone:~$ ifconfig > eth0: flags=-28605<UP,BROADCAST,RUNNING,MULTICAST,DYNAMIC> mtu 1500 > inet 10.42.0.39 netmask 255.255.255.0 broadcast 10.42.0.255 > inet6 fe80::96e3:6dff:fed4:ae86 prefixlen 64 scopeid 0x20<link> > ether 94:e3:6d:d4:ae:86 txqueuelen 1000 (Ethernet) > RX packets 43 bytes 5224 (5.1 KiB) > RX errors 0 dropped 0 overruns 0 frame 0 > TX packets 75 bytes 11801 (11.5 KiB) > TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 > device interrupt 55 > > lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536 > inet 127.0.0.1 netmask 255.0.0.0 > inet6 ::1 prefixlen 128 scopeid 0x10<host> > loop txqueuelen 1000 (Local Loopback) > RX packets 160 bytes 12960 (12.6 KiB) > RX errors 0 dropped 0 overruns 0 frame 0 > TX packets 160 bytes 12960 (12.6 KiB) > TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 > > usb0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500 > inet 192.168.7.2 netmask 255.255.255.252 broadcast 192.168.7.3 > ether 8a:7c:4a:06:36:ec txqueuelen 1000 (Ethernet) > RX packets 0 bytes 0 (0.0 B) > RX errors 0 dropped 0 overruns 0 frame 0 > TX packets 0 bytes 0 (0.0 B) > TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 > > usb1: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500 > inet 192.168.6.2 netmask 255.255.255.252 broadcast 192.168.6.3 > ether 7e:13:e8:37:42:05 txqueuelen 1000 (Ethernet) > RX packets 0 bytes 0 (0.0 B) > RX errors 0 dropped 0 overruns 0 frame 0 > TX packets 0 bytes 0 (0.0 B) > TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 > > > BTW why 2 USBs ?
Because, Microsoft (RNDIS) and Apple (USB-NCM) can't agree on what technology to give access to "without" a signed driver.. With Windows, USB-CDM/NCM needs a 'signed driver' With Mac, RNDIS needs a 3rd party driver.. So due to that crap.. usb0, is the RNDIS driver for Windows users usb1, is the CDC-NCM driver for Mac Users.. and on linux we get two 'working' drivers.. Regards, -- Robert Nelson https://rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAOCHtYimr2z%2B6dq2S4bcwsUNR2P5P2V4do_zs8NWPmHVUrc1Zw%40mail.gmail.com.
