*That ip address is typically the default for both USB and eth0.*

Not in my case:

debian@beaglebone:~$ ifconfig
eth0: flags=-28605<UP,BROADCAST,RUNNING,MULTICAST,DYNAMIC>  mtu 1500
        inet 10.42.0.39  netmask 255.255.255.0  broadcast 10.42.0.255
        inet6 fe80::96e3:6dff:fed4:ae86  prefixlen 64  scopeid 0x20<link>
        ether 94:e3:6d:d4:ae:86  txqueuelen 1000  (Ethernet)
        RX packets 43  bytes 5224 (5.1 KiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 75  bytes 11801 (11.5 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
        device interrupt 55  

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 1000  (Local Loopback)
        RX packets 160  bytes 12960 (12.6 KiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 160  bytes 12960 (12.6 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

usb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500
        inet 192.168.7.2  netmask 255.255.255.252  broadcast 192.168.7.3
        ether 8a:7c:4a:06:36:ec  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

usb1: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500
        inet 192.168.6.2  netmask 255.255.255.252  broadcast 192.168.6.3
        ether 7e:13:e8:37:42:05  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0


BTW why 2 USBs ?

Thanks.

On Thursday, August 20, 2020 at 4:01:15 PM UTC+2, Ray Willis wrote:
>
> Cool. That ip address is typically the default for both USB and eth0.
>
> Glad I could help.
>

-- 
For more options, visit http://beagleboard.org/discuss
--- 
You received this message because you are subscribed to the Google Groups 
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
To view this discussion on the web visit 
https://groups.google.com/d/msgid/beagleboard/b70d4933-989a-49b2-b2c2-769754eefb46o%40googlegroups.com.

Reply via email to