Who does the output of 'ip a' show on your host Ubuntu computer with the BB plugged in? Also, when you plug the BB into the host, check the output of 'dmesg' to see if there are any errors reported for the USB device or the usb ethernet interface.
Cheers, Jon On Thu, Aug 6, 2020 at 8:30 AM Michael <[email protected]> wrote: > Dennis > > yes sir, I'm aware of the changes for windows to .7.x. I verified the > communication is still an issue with the difference. > > with the non-wifi board yes I can communicate with the board via the > ethernet cable. That works just fine, the issue really ends up being > related to the usb communication. In the end I'll be using the USB as > primary communications with the board. Using the wifi is not an option. > > I agree the behavior does sound like faulty drivers. However, what makes > it strange is the fact I've used both windows and linux to attempt to > connect to the board, which kinda makes me feel its hardware related. > > I attempted to connect on a co-workers computer as well. and nothing. We > see the BBB in file exployer, but I wasn't really expecting to being able > to communicate with the BBB on my co-workers computer as I didn't think he > had the drivers. > > with that said, I tried looking for driver information for linux, but > nothing was listed on bbb.org, as it appears that it should need specific > drivers. is there something i should look for, or I can updated related to > drivers on the linux side? > > I'm going to go back to my windows boot and delete and resinstall the > windows drivers in a bit. to see if that does anything. > > On Thursday, August 6, 2020 at 10:11:32 AM UTC-4, Dennis Bieber wrote: >> >> On Thu, 6 Aug 2020 05:51:47 -0700 (PDT), in >> gmane.comp.hardware.beagleboard.user Michael >> >> >> >I want to add that I just tried it on windows 10 and I'm having the same >> >issue. >> >> FYI: on Windows, the USB network uses 192.168.7.x >> >> The behavior you describe sounds more like faulty drivers on the >> host >> side. Have you tried connecting an Ethernet (CAT-5/6) cable between the >> board and your router, and then attempting to connect to the board using >> the IP the router assigned to it? (Or, if the router is modern enough, >> use >> hostname beaglebone or beaglebone.local [some systems will append the >> .local automatically]). >> >> >> -- >> Dennis L Bieber >> >> -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/beagleboard/1c435bd2-d49c-4db7-b934-c401be9e176do%40googlegroups.com > <https://groups.google.com/d/msgid/beagleboard/1c435bd2-d49c-4db7-b934-c401be9e176do%40googlegroups.com?utm_medium=email&utm_source=footer> > . > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAG99bkom_8pD_NF-5Q_gasZMzuY8RFV%3Dn3R5KT_NoYaaZYFhEQ%40mail.gmail.com.
