Thank you Mark, your work is really thorough, I took a look on the Debugging and Benchmarking section especially UART, but unfortunately HW_uart doesn't support 9 bit characters transfer but I found out that for Q1 - I need to find an exemple from the RTOS sdk and modify it to my needs.
-- Aouainia On Tuesday, June 23, 2020 at 8:37:49 PM UTC+2, Mark A. Yoder wrote: > > I've just posted v2 of the PRU Cookbook[1]. It should help with some of > your questions. > > I suggest doing all the development in cloud9 on the Beagle. the PRU > compiler is already installed on the current images. > > --Mark > [1] https://github.com/MarkAYoder/PRUCookbook > > > On Friday, June 19, 2020 at 9:37:17 AM UTC-4, [email protected] > <javascript:> wrote: >> >> Hello, >> >> I am still a newbie to PRU development, and I am trying to use the 9 >> bits UART capability of the UART PRU firmware and I have a couple of >> questions >> >> 1- in the code composer studio,do I use the PRU compiler or the ARM >> compiler ? >> 2- do i have to use sys/bios when using the soft implementatio of the >> UART ? if so how to upload the generated file to the card without an >> emulator, ( I used FTP to deploy .out files to the beaglebone black and >> then coppying the firmware to the remoteproc when getting introduced to the >> PRU development) >> >> > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/ac21268c-8866-45c5-845b-4364fbe3a955o%40googlegroups.com.
