Hello Mala. How do you connect a Radio Receiver to the BBblue? I am interested in using it as a Quadcopter flight controller.
On Sunday, 13 October 2019 04:31:21 UTC+3, Mala Dies wrote: > > Hello Again, > > One last thing... > > ... > > You need to set up your kernel to rt. Real Time kernels are for real time > workings, right. So, those guys or guy/lady, whomever, set up the github > repo. in my last post, imfatant/test, and it should show a quick image to > grab for use. > > Seth > > P.S. Um, if I hear from you, nice. If not, that is okay too. I will > rummage around some more w/ ideas and quirks until I get this BBB land more > familiarized. Yea boy! > > On Wednesday, September 4, 2019 at 6:02:33 PM UTC-5, [email protected] > wrote: >> >> So I have had nothing but trouble with my two BBBls. I attempted every >> walk through I could find on both of them, every time I would get stuck at >> a different point before I could ever get to installing ardupilot software. >> I finally got fed up with them, bought a Pixhack, combined it with a I.MX6 >> scavenged from a 3DR Solo, and went on about my business. Due to a recent >> operator >> error induced gravitational field incident, the pixhack seems to have >> developed dementia as it no longer oriented as to place time or self. >> Therefore, I have recently found it necessary to bring the BBBls out of >> storage and give them a second chance. >> >> >> *Here is the problem*: both of these little beauties seem to have called >> it quits. When I connect them to a computer, any computer (I've tried Win7, >> Win10, and Ubuntu 18.something) with any usb cable sometimes the computer >> will acknowledge that a device was connected, sometimes it won't. On >> windows, when it realizes that a device is there, it tells me that I need >> to format the SD card, as if that was the only thing I connected, Linux >> machines will let me view the files but that's it. I no longer have the >> "Out the box" files that came on the BBBls that used to be there, the ones >> with the little picture of the dog and the "getting started" stuff. Where'd >> they go? *Can I re-download the factory software somewhere? or is there >> a Factory reset option? * >> >> >> The pictures below are included to show the lights that stay on on each >> one. >> >> #1 G,R,75, and the one by the 12v input light up immediately when power >> is applied, with or without an SD card, and 0-3 light up sequentially after >> about 5 seconds without a card, a little slower with one. >> >> #2 goes through the same process, but eventually all lights cut off >> except the one by the 12v plug and led zero goes into a double blink, pause >> pattern; with or without a card. >> >> [image: BBBLues1.jpg] >> >> >> [image: BBBLues2.jpg] >> >> When I say "card", I mean one flashed with >> "bone-debian-9.5-iot-armhf-2018-10-07-4gb.img.xz" >> >> I have installed BONE_64 on my PCs >> > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/4f2e69b5-0916-4139-aea4-ff5f2dd73752%40googlegroups.com.
