Hi Gwen I was able to use WhatsApp after I did IP forwarding but I can’t get my browser or other application to connect to the internet, do you have any idea why?
Regards, Josiah On Thu, 19 Dec 2019 at 11:20 Josiah Akinloye <[email protected]> wrote: > Hi Tarmo, > I have tried to use ConnMan to tether the modem dialup connection but it > requires ofono which is not well documented, I have also tried to tweak > connman settings and I am not getting results. I guess connman tether is > restricted to wlan and eth0 network not cellular connection. > > On Tue, 17 Dec 2019 at 15:23 Josiah Akinloye <[email protected]> > wrote: > >> Hello Tarmo >> >> On Tue, 17 Dec 2019 at 15:22 Tarmo Kuuse <[email protected]> wrote: >> >>> Hi Josiah! >>> >>> On Monday, 16 December 2019 16:00:20 UTC+2, Josiah Akinloye wrote: >>>> >>>> Thanks Gwen. >>>> I really appreciate your effort. >>>> I will get back to you >>>> Again... a big thanks >>>> >>>> On Mon, 16 Dec 2019 at 14:56 Gwen Stouthuysen <[email protected]> >>>> wrote: >>>> >>>>> No, I haven't tried to remove connmanctl >>>>> >>>>> I have no problem with the application, as it does exactly what I want >>>>> it to do. >>>>> >>>>> There is quite some configuration behind the curtains, dive deeper >>>>> into the configuration files and you might find the settings you want to >>>>> alter. >>>>> >>>>> Gwen >>>>> >>>>> Op ma 16 dec. 2019 om 14:17 schreef Josiah Akinloye < >>>>> [email protected]>: >>>>> >>>>>> Thanks Gwen, Do you have any idea how I can manage the WiFi network >>>>>> on beagle bone wireless without using CONNMANCTL >>>>>> >>>>>> Kind regards, >>>>>> Josiah >>>>>> >>>>>> On Mon, 16 Dec 2019 at 13:55 Gwen Stouthuysen <[email protected]> >>>>>> wrote: >>>>>> >>>>>>> Here is some explication/tutorial on bridging the two networks in >>>>>>> your BBW >>>>>>> >>>>>>> https://wiki.debian.org/BridgeNetworkConnections >>>>>>> >>>>>>> Regards, >>>>>>> >>>>>>> Gwen >>>>>>> >>>>>>> Op ma 16 dec. 2019 om 13:49 schreef Josiah Akinloye < >>>>>>> [email protected]>: >>>>>>> >>>>>>>> Thanks for your reply, I have been able to get internet >>>>>>>> connectivity from the modem using MBIM and also I have created a WiFi >>>>>>>> gateway + DHCP server using COMMANCTL but where I have problem is the >>>>>>>> bridging the gateway with the network port offered by the 4g modem. >>>>>>>> Thanks >>>>>>>> again >>>>>>>> >>>>>>>> On Mon, 16 Dec 2019 at 11:58 Gwen Stouthuysen <[email protected]> >>>>>>>> wrote: >>>>>>>> >>>>>>>>> Let me try to explain what you will have to do: >>>>>>>>> >>>>>>>>> - Connect the module to the BBBW. >>>>>>>>> - It has USB drivers so it should be straight forward to >>>>>>>>> enable it as a network node. >>>>>>>>> - A small cape could be designed to do this, RPi hats do >>>>>>>>> exist >>>>>>>>> - >>>>>>>>> >>>>>>>>> https://www.elementzonline.com/blog/Accessing-internet-with-SIM7600-4G-Modem-using-MBIM-interface-in-Pocketbeagle-Beaglebone >>>>>>>>> >>>>>>>>> - Set up a WiFi gateway (Wifi access point credentials + >>>>>>>>> DHCP server for this port) >>>>>>>>> - Bridge the gateway with the network port offered by the >>>>>>>>> SIM7600e driver >>>>>>>>> - Set up a firewall to avoid malicious access from both WiFi >>>>>>>>> and Cellular >>>>>>>>> >>>>>>>>> It is a bit more complex than forwarding the IP address, but it is >>>>>>>>> a well documented setup. >>>>>>>>> >>>>>>>>> But you are lucky: the standard Debian OS prepares the WiFi as an >>>>>>>>> access point, you just have to arrange the SIM7600e integration and >>>>>>>>> the >>>>>>>>> bridge & Firewall >>>>>>>>> >>>>>>>> >>> When both your dialup connection and Wifi are managed by connman, you >>> can use its built-in tethering functionality to share Internet from first >>> to the other. >>> >>> If I'm interpreting connmanctl v1.36 documentation correctly (connmanctl >>> --help), the command would look something like this: >>> >>> $ sudo connmanctl tether wifi on MY_SSID MY_PASS >>> >>> There might be some requirements, i.e. connman might assume it has >>> established the dialup connection (as opposed to MBIM). I haven't >>> experimented this much. >>> >>> -- >>> Kind regards, >>> Tarmo >>> >>> -- >>> For more options, visit http://beagleboard.org/discuss >>> --- >>> You received this message because you are subscribed to the Google >>> Groups "BeagleBoard" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to [email protected]. >>> To view this discussion on the web visit >>> https://groups.google.com/d/msgid/beagleboard/0c404225-528a-4242-b887-a3cf795a7c0d%40googlegroups.com >>> <https://groups.google.com/d/msgid/beagleboard/0c404225-528a-4242-b887-a3cf795a7c0d%40googlegroups.com?utm_medium=email&utm_source=footer> >>> . >>> >> -- >> >> >> >> >> *Josiah Akinloye+2348135010778ceo at Hubtecs Technological >> InstituteRobotic and AutomationEgalitarian TranshumanistFuturist"Mindset >> powered by hard work equals unbeatable Achievement"--OLUWEST* >> > -- > > > > > > > > *Josiah Akinloye+2348062081641profile > <https://josiahakinloye.com>-https:josiahakinloye.com > <http://josiahakinloye.com>President at Main-Logix LimitedCeo of Savycon > TechnologyRobotic and AutomationEgalitarian TranshumanistFuturist"Mindset > powered by hard work equals unbeatable Achievement"--Josiah Akinloye* > -- *Josiah Akinloye+2348062081641profile <https://josiahakinloye.com>-https:josiahakinloye.com <http://josiahakinloye.com>President at Main-Logix LimitedCeo of Savycon TechnologyRobotic and AutomationEgalitarian TranshumanistFuturist"Mindset powered by hard work equals unbeatable Achievement"--Josiah Akinloye* -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CABXof%3DWSY%2BUj_Tn8AKivkew6BeZF4hGs8Rk-GR1cyB2wOX5sNQ%40mail.gmail.com.
