Thanks for your reply, I have been able to get internet connectivity from the modem using MBIM and also I have created a WiFi gateway + DHCP server using COMMANCTL but where I have problem is the bridging the gateway with the network port offered by the 4g modem. Thanks again
On Mon, 16 Dec 2019 at 11:58 Gwen Stouthuysen <[email protected]> wrote: > Let me try to explain what you will have to do: > > - Connect the module to the BBBW. > - It has USB drivers so it should be straight forward to enable it > as a network node. > - A small cape could be designed to do this, RPi hats do exist > - > > https://www.elementzonline.com/blog/Accessing-internet-with-SIM7600-4G-Modem-using-MBIM-interface-in-Pocketbeagle-Beaglebone > > - Set up a WiFi gateway (Wifi access point credentials + DHCP > server for this port) > - Bridge the gateway with the network port offered by the SIM7600e > driver > - Set up a firewall to avoid malicious access from both WiFi and > Cellular > > It is a bit more complex than forwarding the IP address, but it is a well > documented setup. > > But you are lucky: the standard Debian OS prepares the WiFi as an access > point, you just have to arrange the SIM7600e integration and the bridge & > Firewall > > > Regards, > > Gwen > > Op zo 15 dec. 2019 om 07:42 schreef Josiah Akinloye < > [email protected]>: > >> please how can i forward ip address of a sim 7600e to a beaglebone wifi. >> so as to use it has hotspot? >> >> -- >> For more options, visit http://beagleboard.org/discuss >> --- >> You received this message because you are subscribed to the Google Groups >> "BeagleBoard" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/beagleboard/98926bc9-0d9b-493c-8b49-d06f76b73d62%40googlegroups.com >> <https://groups.google.com/d/msgid/beagleboard/98926bc9-0d9b-493c-8b49-d06f76b73d62%40googlegroups.com?utm_medium=email&utm_source=footer> >> . >> > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/beagleboard/CAFfeaG9D9n2VtWqqvmehZDct1r9BU8kV9cv-u046Lk8H9YvKVA%40mail.gmail.com > <https://groups.google.com/d/msgid/beagleboard/CAFfeaG9D9n2VtWqqvmehZDct1r9BU8kV9cv-u046Lk8H9YvKVA%40mail.gmail.com?utm_medium=email&utm_source=footer> > . > -- *Josiah Akinloye+2348135010778ceo at Hubtecs Technological InstituteRobotic and AutomationEgalitarian TranshumanistFuturist"Mindset powered by hard work equals unbeatable Achievement"--OLUWEST* -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CABXof%3DU%3DXOfeHEToNk%2BbR%3Dr29XhEpCUdqYxVAKafb9YtoWGpjA%40mail.gmail.com.
