You could view the implementation of overlays as an optimization pass. Greg
On Wednesday, April 26, 2017 at 11:50:02 AM UTC-4, ThomasL wrote: > > Edit: This was wrong. Using the config-pin scripts we got everything > working even at higher frequencies (30MHz). We are going to have a look at > the overlays later. > Op woensdag 26 april 2017 11:25:21 UTC+2 schreef ThomasL: >> >> >> Also, we presume that when using the cape-universala with pin config we >> are doing the toggles trough software with the bone-pinmux-helper instead >> of connecting register 30 to the output pads. We only get a toggle speed of >> around 2MHz which should be way higher if it was the PRU controlling the >> pin directly. >> >> >> -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/fcd56bbd-6c9c-4b7e-94a3-612448a5fad0%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
