Thanks for the Prompt response. I dont have that cable i mentioned above right now. But I tried the below two Hardware .
1. USB to RS-232 Converter <http://www.amazon.in/RS-232-Serial-Converter-Cable-Technotech/dp/B017H1SD9E?tag=googinhydr18418-21&tag=googinkenshoo-21&ascsubtag=058e6ce6-5e13-4457-bf0e-61473874f9b4> and connected DB9 connector pins GND,TX and RX with that of the BBB J1(cross fashion - TX-RX and vice versa) connector. My settings are 115200 8N1 @ /dev/ttyUSB0 . I can see logs on minicom but they are all garbled.Are my Serial Port Settings correct. 2.Tin Flyswatter CAN 2 <http://www.tincantools.com/JTAG/Flyswatter2.html> Same settings and Hardware connections with it and getting the same result. Or Do I need only the h.w I mentioned in my first post. I believe the 1 , 2 h/w already have TTL 3v3 converter inside them?isn it? On Thursday, May 5, 2016 at 10:25:15 AM UTC+5:30, RobertCNelson wrote: > > > On May 4, 2016 11:50 PM, "Raul Piper" <[email protected] <javascript:>> > wrote: > > > > HI, > > I am new to this group.I am trying to boot a custom kernel which I have > built using this link .I hard pressed the Button S2 while the board was > booting from the MicroSD CARD (not the EMMC) but I see no display on HDMI > connected TV and neither any LED is glowing except the Power LED(PWR).I > want to see the boot logs and opened the minicom by connecting the USB > cable to the BBB but can't see any boot logs on the minicom (@115200).Is it > possible to get the boot logs using the USB cable or do I have to purchase > > No, is not possible.. That interface you are using is created by the > kernel itself.. Way after it started booting... > > "Serial Debug cable : for this like Standard FTDI Cable or Adafruit 4 Pin > Cable (PL2303) or (USB to serial adapter) TTL-232R-3V3 at Digi-Key. > > Correct, that's the cable you need.. 3.3v... > > Regards, > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/5bedc12d-b1db-41f5-a1e5-4afd46dd29ba%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
