On May 4, 2016 11:50 PM, "Raul Piper" <[email protected]> wrote: > > HI, > I am new to this group.I am trying to boot a custom kernel which I have built using this link .I hard pressed the Button S2 while the board was booting from the MicroSD CARD (not the EMMC) but I see no display on HDMI connected TV and neither any LED is glowing except the Power LED(PWR).I want to see the boot logs and opened the minicom by connecting the USB cable to the BBB but can't see any boot logs on the minicom (@115200).Is it possible to get the boot logs using the USB cable or do I have to purchase
No, is not possible.. That interface you are using is created by the kernel itself.. Way after it started booting... "Serial Debug cable : for this like Standard FTDI Cable or Adafruit 4 Pin Cable (PL2303) or (USB to serial adapter) TTL-232R-3V3 at Digi-Key. Correct, that's the cable you need.. 3.3v... Regards, -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAOCHtYiQLhpdg-bD3XL7nFC3O-redsWUyhJX%2B%2BX_%2BpQufw55iw%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.
