On Fri, Jun 6, 2014 at 11:46 AM, Dominik Fretz <[email protected]> wrote:
> Hi Jason,
>
> After you asked the OpenROV project on Github on what to do to get OpenROV
> over to debian I had a go at the Debian images.
>
> I tried to get the latest Debian demo image (from
> http://elinux.org/BeagleBoardDebian) running on the BeagleBone Black (I
> think its a revision B).
> I tested it with both, debian-7.5-console-armhf-2014-05-06.tar.xz and
> debian-jessie-console-armhf-2014-05-06.tar.xz and wrote it to an SD card
> with --dtb beaglebone.

This is a long standing bug, that i didn't fix till yesterday..
"--dtb" only choose the generic multi platform kernel, thus the "--dtb
beaglebone" would not have much working.. With the "2014-05-06" use
"--uboot bone"..

Of course, i released a new image last night "2014-06-05" (maybe a
should have waited a few more days so the numbers were so oddly
close)..

Which "--dtb beaglebone" now works thanks to:
https://github.com/RobertCNelson/omap-image-builder/commit/10ddcafaa6ffc12c4af089e9f8237bd32372c5bc

> But when I put it in the BBB it doesn't seem to boot up properly.
> I can't get a network connection, not on the LAN port nor if I connect it
> via USB to my laptop.
>
> I checked the /var/log/messages and /var/log/dmesg afterwards and it ends
> with a message that the root partition wasn't cleanly unmounted and should
> be checked with fsck but nothing more.
> The heartbeat is still going on though.
>
> I will try to hook up a second BBB via UART to the serial debug output to
> see if I can get anything more.
>
> Do you have any hint in what could cause that issue?
>
> Beside that, I will test the demo image from
> http://beagleboard.org/latest-images/ too.

Regards,

-- 
Robert Nelson
http://www.rcn-ee.com/

-- 
For more options, visit http://beagleboard.org/discuss
--- 
You received this message because you are subscribed to the Google Groups 
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
For more options, visit https://groups.google.com/d/optout.

Reply via email to