Oh man, I thought that it would work. Thanks for showing me that it was the wrong one. I took a look at the arduino code: it seems to be the right one, not sure if it will work with the beaglebone, but I'll give it a try. Thanks for the help.
On Mon, Nov 18, 2013 at 7:18 PM, Seth <[email protected]> wrote: > I wouldn't try testing with that code - I found it > here<https://gist.github.com/grodtron/4751014>, > and by the looks of the commenting it is meant to work with a > LSM303DLH<http://www.pololu.com/product/1250/>, > not a ADXL345. I found > this<https://github.com/jenschr/Arduino-libraries/blob/master/ADXL345/examples/ADXL345_no_library/BareBones_ADXL345.pde>, > however, which looks like demo code for the device you have, although it is > written for Arduino and not in Python but it should get you on the right > path. > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to a topic in the > Google Groups "BeagleBoard" group. > To unsubscribe from this topic, visit > https://groups.google.com/d/topic/beagleboard/Rkhvpaf8HHc/unsubscribe. > To unsubscribe from this group and all its topics, send an email to > [email protected]. > For more options, visit https://groups.google.com/groups/opt_out. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
